How to remove original steering wheel on late NA8 ??

Body, Paint, Interior and Trim questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

michael
Fast Driver
Posts: 141
Joined: Thu Apr 08, 2004 7:57 pm
Vehicle: NA8
Location: Brisbane

How to remove original steering wheel on late NA8 ??

Postby michael » Sat Apr 02, 2011 6:14 pm

Hello,

Can anyone tell me how to remove the above wheel

Thank you
Michael

User avatar
Hammer
Speed Racer
Posts: 2849
Joined: Fri Apr 25, 2003 11:00 am
Vehicle: NB SP
Location: Sydney
Contact:

Re: How to remove original steering wheel on late NA8 ??

Postby Hammer » Sun Apr 03, 2011 4:53 pm

Here's a pictorial step-by-step guide on how to remove the dashboard of an NA, taken from miata.net.

Check page 6 for the steering wheel removal? Although this shows the Nardi wheel (not the Momo).

http://www.miata.net/garage/DashRmv_89_93.pdf
H@mmer - 1994 Clubman | 2002 SP
Image
GO TOPLESS!!!

User avatar
Benny
Speed Racer
Posts: 2607
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NB SP
Location: Gorgeous Sydney
Contact:

Re: How to remove original steering wheel on late NA8 ??

Postby Benny » Mon Apr 04, 2011 1:34 pm

Once you are at the point where you are undoing the centre nut on the wheel, please make sure that you leave this nut on for a couple of turns, otherwise, when you do finally get the wheel to budge, it may end up bashing you in the face and removing a couple of teeth!

It won't want to come off easily, and you will need some force to pull it off the hub.
Image
ALWAYS RUNNING, SP with Bilstein Coil Overs and Doof Doof sound. Member of the Fat Bastards Racing Team

User avatar
de Bounce
Racing Driver
Posts: 1091
Joined: Thu Feb 12, 2009 5:19 pm
Vehicle: NC
Location: Northern Burbs - Melbourne

Re: How to remove original steering wheel on late NA8 ??

Postby de Bounce » Mon Apr 04, 2011 2:14 pm

Benny wrote:Once you are at the point where you are undoing the centre nut on the wheel, please make sure that you leave this nut on for a couple of turns, otherwise, when you do finally get the wheel to budge, it may end up bashing you in the face and removing a couple of teeth!

It won't want to come off easily, and you will need some force to pull it off the hub.

Totally agree with leaving the nut on.

The wheel spline is generally on a taper. Once they move they come totally free similar to a ball joint.

When pulling on the wheel, I found applying extra force to one side then the other and rock/flex the wheel it should pop loose.

Alternative is to use a steering wheel puller.
2011 NC2 PRHT SE in Dolphin Grey
2001 NB8B in Crystal Blue - Sold :(
Motorkhana Video


Return to “MX5 Body, Paint, Interior & Trim”

Who is online

Users browsing this forum: Google [Bot] and 153 guests