na6 performance
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
- funmx5
- Fast Driver
- Posts: 202
- Joined: Sun Sep 12, 2010 5:04 pm
- Vehicle: NA6
- Location: Geelong
na6 performance
what sort of rear wheel figures are people pulling out normal aspirated engine?on na mx5s
red na6
cx7
cx7
- zossy1
- Racing Driver
- Posts: 1979
- Joined: Wed Aug 18, 2010 8:48 am
- Vehicle: NA8
- Location: Southern Highlands, NSW
- Contact:
- snshami
- Racing Driver
- Posts: 625
- Joined: Thu Dec 23, 2010 11:21 pm
- Vehicle: NA8
- Location: Doreen, Victoria
Re: na6 performance
Enough to put a big smile on my face
------------------------
1997 NA8 Neo Green - Limited Edition
1997 NA8 Neo Green - Limited Edition
- funmx5
- Fast Driver
- Posts: 202
- Joined: Sun Sep 12, 2010 5:04 pm
- Vehicle: NA6
- Location: Geelong
Re: na6 performance
i was interested in performance figures ,not a dollar value i know people who spent big bucks for no big gains
red na6
cx7
cx7
- rossint
- Fast Driver
- Posts: 460
- Joined: Wed Jan 09, 2008 7:56 pm
- Vehicle: NA6
- Location: ADELAIDE
Re: na6 performance
80kw, mild aftermarket cams, intake, headers, exhaust.
- zossy1
- Racing Driver
- Posts: 1979
- Joined: Wed Aug 18, 2010 8:48 am
- Vehicle: NA8
- Location: Southern Highlands, NSW
- Contact:
Re: na6 performance
funmx5 wrote:i was interested in performance figures ,not a dollar value i know people who spent big bucks for no big gains
"Performance figures" = "dollar value"
They are one and the same.
- jerrah
- Racing Driver
- Posts: 724
- Joined: Mon Mar 10, 2008 2:54 am
- Vehicle: NA6
- Location: Brisbane
Re: na6 performance
The B6 motor responds well to forced induction.funmx5 wrote:i know people who spent big bucks for no big gains
N/A tuning never seems to result in much.
1991 MX5
-
- Racing Driver
- Posts: 1125
- Joined: Thu Jul 26, 2007 5:46 pm
- Vehicle: NA6
- Location: North Brisbane
Re: na6 performance
jerrah wrote:The B6 motor responds well to forced induction.funmx5 wrote:i know people who spent big bucks for no big gains
N/A tuning never seems to result in much.
If I do another track day with the club, I'll try and remember that (and that blue NC and silver evo should remember this)
HP isn't the be all end all, Torque and where you get it is what will get your NA going.
Terry
"Racing shouldn't be for rich idiots, but for all idiots"
- clubman7
- Driver
- Posts: 32
- Joined: Sun Jan 24, 2010 12:59 pm
Re: na6 performance
Making 100rwkw after fitting new Tighe 1409a cams, double valve springs. Toyota quad throttle bodies from a 4age Silvertop, extractors, head rebuild, and Autronic SMC ecu. Not much change from $4000.00
Cams ended up being a little too much for engine rev range as they were still making power past 8000rpm.
I'm still using hydraulic lifters though.
Cams ended up being a little too much for engine rev range as they were still making power past 8000rpm.
I'm still using hydraulic lifters though.
B6 powered Locost Clubman.
-
- Fast Driver
- Posts: 121
- Joined: Thu Mar 01, 2007 11:57 am
- Vehicle: NA8
- Location: Perth WA
Re: na6 performance
Just as a comparision I have a 1800cc with the same mods as clubman 7 and my MX5 puts out 122rwkw
A few extra cc and therefore a few extra rwkw
Power is great but it depends what you want to do with it?
Autotests, sprints, drags, just the streets?
A few extra cc and therefore a few extra rwkw
Power is great but it depends what you want to do with it?
Autotests, sprints, drags, just the streets?
Barb's Short 57.83 Long 70.45
Motorsport Manager of the MX5 Club of WA (11 years service)
Motorsport Manager of the MX5 Club of WA (11 years service)
- green_comet
- Car Detailing Guru
- Posts: 1848
- Joined: Tue May 24, 2005 1:41 am
- Vehicle: NA8
- Location: Melbourne
na6 performance
Slap a turbo on the engine and be done with it, easily the best bang for buck.
- Hammer
- Speed Racer
- Posts: 2849
- Joined: Fri Apr 25, 2003 11:00 am
- Vehicle: NB SP
- Location: Sydney
- Contact:
Re: na6 performance
Guran's factory standard NA6 did a 74rwkw from the last MX5 Club Dyno Day last year.
As stated, his NA6 has no mods in the engine and/or drive train. AFAIK, the only changes Guran has made are for safety on track days (ie. BD rollbar; racing seat and harness etc).
As stated, his NA6 has no mods in the engine and/or drive train. AFAIK, the only changes Guran has made are for safety on track days (ie. BD rollbar; racing seat and harness etc).
H@mmer - 1994 Clubman | 2002 SP
GO TOPLESS!!!
GO TOPLESS!!!
- NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: na6 performance
About the same as the clubman here, but with 10.5 compression, solid lifters, heaps of bottom end balancing, adjustable cam gears and a serious port job. Im guessing a bit more power on the same dyno. I dont have quads but they dont gain power really just response.
Dann
Dann
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
- SIB
- Fast Driver
- Posts: 200
- Joined: Thu Apr 23, 2009 3:34 pm
- Vehicle: NA6
- Location: Sydney
Re: na6 performance
Hammer wrote:Guran's factory standard NA6 did a 74rwkw from the last MX5 Club Dyno Day last year.
As stated, his NA6 has no mods in the engine and/or drive train. AFAIK, the only changes Guran has made are for safety on track days (ie. BD rollbar; racing seat and harness etc).
........and the brave pills which give him another 10kw.
1991 LE#162 WP 1.17.700; SMPS 1.12.112
- Guran
- Speed Racer
- Posts: 3754
- Joined: Sun Feb 15, 2009 6:42 pm
- Vehicle: ND - 1.5
- Location: Albion Park NSW
- Contact:
Re: na6 performance
Hammer wrote:Guran's factory standard NA6 did a 74rwkw from the last MX5 Club Dyno Day last year.
As stated, his NA6 has no mods in the engine and/or drive train. AFAIK, the only changes Guran has made are for safety on track days (ie. BD rollbar; racing seat and harness etc).
71rwkW actually . I think it was your Clubman that pulled 74rwkW, though that was with stock timing. My NA6 is indeed stock except for the BD rollbar, harness, seat, steering wheel, bonnet clips, and CD player & speakers. Timing is set at 14deg BTDC and that's it for the engine and drivetrain. I've still got the original open diff too.
Looking forward to using some more of those brave pills tomorrow at Wakefield!
Standard 2006 NC - YouTube
WP 1:11.89 | SMP-S 1:05.90 GP 1:54.93 N 1:18.09 L 2:22.49 | PW 1:02.52
PI 2:00.55 | W-S 1:12.44 W-L 1:43.36 | SR 1:33.25
WP 1:11.89 | SMP-S 1:05.90 GP 1:54.93 N 1:18.09 L 2:22.49 | PW 1:02.52
PI 2:00.55 | W-S 1:12.44 W-L 1:43.36 | SR 1:33.25
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 51 guests