SP Ride height advise please.

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

User avatar
bear2230
Racing Driver
Posts: 1627
Joined: Thu Jul 01, 2010 11:43 pm
Vehicle: NB SP
Location: Sydney South, God's country.
Contact:

SP Ride height advise please.

Postby bear2230 » Tue Oct 19, 2010 11:34 pm

Hey Guys,

So the lowering thing is happening now. My problem is Scooby 2 will never be on a race track but the ride height is starting to annoy me now.
I don't want new coil-overs just lowered springs but I don't know which ones to get.
I am happy with the ride so I would not want stiffer springs.(maybe a little would be OK)

Choices are:
Eibach Pro-Kit (mania) or mxparts.UK
King Springs (mania)
Tein S Tech Springs NB (mx5centre)

Keeping shocks, only done 1400km so still good.

Which springs would give me closest to standard feel but about 30mm lower rear and 20mm front.
Any advise would be greatly appreciated. Or alternatives I haven't mentioned.

Regards,

Richard
Image
Scooby - Silver SP - Build # 53
Snowie - White NB project car. Engineered and registered :)
Vader - Hilux & Gretel the black German Bitch

SPy vs. SPy
Racing Driver
Posts: 902
Joined: Wed Mar 10, 2004 7:40 pm
Vehicle: ND - 2
Location: In a fast car, so not an NC.

Re: SP Ride height advise please.

Postby SPy vs. SPy » Wed Oct 20, 2010 9:15 am

There are two things to consider

1/ to install the springs, you have to pull the current shocks out.

2/ The Eibachs (recommended choice) are about $500

The Dilemma, Bilstein PSS9s can be sourced from America for very reasonable money.

SHOX.COM

Bilstein PSS9 kit 1998 - 2005 Kit comes with shocks and springs, and allows ride height and 9 dampening adjustments. #GM5-8609-H1 $1379.00

These will then bolt right in you can set everything to the right height and you will have one of the best sets of suspension available for the money.
Went for a drive and there were slow cars everywhere, why are NC's so common . . . must be NC = Normally Cardiganed.

User avatar
Charlie Brown
Speed Racer
Posts: 2623
Joined: Mon Apr 28, 2003 11:00 am
Vehicle: NC
Location: Sydney, Just out of Dragon Territory over the bridge in the "Shire"
Contact:

Re: SP Ride height advise please.

Postby Charlie Brown » Wed Oct 20, 2010 10:04 am

Obviously PSS9s are the go but the ride will be firmer than going the Eibach Sports spring/stock shock route.

The Eibachs drop is around 30mm and MX5 Parts can land a set at your door in the Shire for $337 (208 GBP delivered). Kings will cost you about the same if you have Mania deliver them. You’d need to check with them how much Kings drop the car.

I’m at Sylvania and have a set of spring compressors, PM me if you want to borrow them to do the install yourself.
Image

Wakefield 1:09.13 Eastern Creek GP 1:50.198 Ext 2:17.538 Sth 1:02.9003
Phillip Is 1:58.50 Winton Short 1:10.7 Lakeside 1:05.7711 MDTC 45.20

User avatar
bear2230
Racing Driver
Posts: 1627
Joined: Thu Jul 01, 2010 11:43 pm
Vehicle: NB SP
Location: Sydney South, God's country.
Contact:

Re: SP Ride height advise please.

Postby bear2230 » Thu Oct 21, 2010 12:21 pm

Thank you guys,

I have ordered the Eibach Pro-Kit landed here for $330.00. Shox.com.
Played with the idea Bilstein PSS9s but would be wasted driving around the shire, and maybe to firm even on the soft settings.
I will try to get installed locally. Any suggestions?
Image
Scooby - Silver SP - Build # 53
Snowie - White NB project car. Engineered and registered :)
Vader - Hilux & Gretel the black German Bitch

User avatar
Benny
Speed Racer
Posts: 2607
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NB SP
Location: Gorgeous Sydney
Contact:

Re: SP Ride height advise please.

Postby Benny » Thu Oct 21, 2010 4:16 pm

Pity I didn't see this thread earlier, but any good suspension place can re-set your springs to give you a lower ride height without affecting your ride.

Don't dismiss the PS9's.
They actually ride better than the stock springs and shocks, as well as improving the handling, and you can always just turn a knob to stiffen them up, if you want to.
Image
ALWAYS RUNNING, SP with Bilstein Coil Overs and Doof Doof sound. Member of the Fat Bastards Racing Team

User avatar
bear2230
Racing Driver
Posts: 1627
Joined: Thu Jul 01, 2010 11:43 pm
Vehicle: NB SP
Location: Sydney South, God's country.
Contact:

Re: SP Ride height advise please.

Postby bear2230 » Thu Oct 21, 2010 5:10 pm

Noooooooooooooooooo
Benny, you need to spend more time on the forum.
Image
Scooby - Silver SP - Build # 53
Snowie - White NB project car. Engineered and registered :)
Vader - Hilux & Gretel the black German Bitch


Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 230 guests