Hi everyone,
I have a stock NA 89 Import and am thinking seriously about having someone, probably MX5 Mania, install a cold air induction intake, headers and a hi flow exhaust.
I am wondering if people could share their thoughts and experiences regarding such an installation .... Interested in hearing what people think the advantages and disadvantages are...
Can anyone comment specifically on the MX 5 Mania product and service and what I can expect performance wise, should I go down this path...
Looking forward to the thoughts..
Cheers
Investo
NA - Cold Air Intake, Headers and Hi-Flow Exhaust
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
- Racing Driver
- Posts: 1401
- Joined: Wed Nov 19, 2008 2:50 pm
- Vehicle: NA8
Re: NA - Cold Air Intake, Headers and Hi-Flow Exhaust
I got them to fit the CAI and my full exhaust on my NA8.
top work done, and in good time too
top work done, and in good time too
Looking for an SVT motor for this:
viewtopic.php?f=73&t=62834
viewtopic.php?f=73&t=62834
Re: NA - Cold Air Intake, Headers and Hi-Flow Exhaust
Thanks for the post. Did the CAI and exhaust offer you more in performance? If so how much performance? Was there a noticeable increase in noise?
-
- Racing Driver
- Posts: 1401
- Joined: Wed Nov 19, 2008 2:50 pm
- Vehicle: NA8
Re: NA - Cold Air Intake, Headers and Hi-Flow Exhaust
http://www.youtube.com/watch?v=Ll18w_qT9Fw
thats how it sounds - I love it!
the CAI is loud - really loud!!
after 5 laps at EC my ears are ringing...but I dont care! hehe (its no LS1 or RB25 goodness sound, but for what it is its nice!)
performance, yep gave me some more power and dropped my lap times
thats how it sounds - I love it!
the CAI is loud - really loud!!
after 5 laps at EC my ears are ringing...but I dont care! hehe (its no LS1 or RB25 goodness sound, but for what it is its nice!)
performance, yep gave me some more power and dropped my lap times
Looking for an SVT motor for this:
viewtopic.php?f=73&t=62834
viewtopic.php?f=73&t=62834
-
- Speed Racer
- Posts: 11857
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: NA - Cold Air Intake, Headers and Hi-Flow Exhaust
Worthwhile increase in engine performance, but also if you use the CAI that breathes throught the cowl area below the winscreen (next to the fresh air intake for cabin), then yes there is a noticeable increase in noise.
CAI or at least opening up breathing along with high flow catalytic convertor & cat-back exhaust is a very well trodden path on these & many vehicles. Next is usually better headers, although hard to improve on NB8, but NA6 from memory can be improved upon, & there's a little room for improvement on the NA8. Next it's usually a piggyback or standalone ECU, depending on which State etc you're in.
In terms of how much of an increase in performance you can expect on an NA6 with CAI & full exhaust from engine to rear bar, from memory no more than 10kw, & that's assuming a full & recent service to ensure already optimal engine performance. I'm sure that NA6 owners that have done this can better advise. Btw, increasing the timing on the NA6 from 10 to 14 degrees is also popular.
CAI or at least opening up breathing along with high flow catalytic convertor & cat-back exhaust is a very well trodden path on these & many vehicles. Next is usually better headers, although hard to improve on NB8, but NA6 from memory can be improved upon, & there's a little room for improvement on the NA8. Next it's usually a piggyback or standalone ECU, depending on which State etc you're in.
In terms of how much of an increase in performance you can expect on an NA6 with CAI & full exhaust from engine to rear bar, from memory no more than 10kw, & that's assuming a full & recent service to ensure already optimal engine performance. I'm sure that NA6 owners that have done this can better advise. Btw, increasing the timing on the NA6 from 10 to 14 degrees is also popular.
Re: NA - Cold Air Intake, Headers and Hi-Flow Exhaust
Thanks for the replies - relatively new to the MX5 scene and appreciate your comments, Thank You
-
- Speed Racer
- Posts: 11857
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: NA - Cold Air Intake, Headers and Hi-Flow Exhaust
Welcome & here's a couple of recent useful threads:
viewtopic.php?f=18&t=42741&hilit=na6+performance
viewtopic.php?f=29&t=43041&hilit=na6+power
viewtopic.php?f=18&t=42741&hilit=na6+performance
viewtopic.php?f=29&t=43041&hilit=na6+power
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 133 guests