Hi
Just purchased an LSD. Can anyone recommend a diff specialist in the south east Melbourne area ?
I have spoken to keysborough diffs in Dandenong. Anyone used them before ?
Diff specialist south east melbourne
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
- Learner Driver
- Posts: 17
- Joined: Fri Apr 02, 2010 10:54 pm
- Vehicle: NA6
-
- Racing Driver
- Posts: 1770
- Joined: Fri May 16, 2008 1:39 pm
- Vehicle: NB8A
- Location: FarSE Melbourne
Re: Diff specialist south east melbourne
I had a diff welded up (CIG Locker) for my prev track car by them 10 yrs ago.
10yrs, two sets of axles (splines twisted due to power), and 50 track days later, the diff still worked perfectly.
I'd definitely recommend them based on my experience...
10yrs, two sets of axles (splines twisted due to power), and 50 track days later, the diff still worked perfectly.
I'd definitely recommend them based on my experience...
-
- Forum Guru
- Posts: 4897
- Joined: Mon Apr 24, 2006 7:27 pm
- Vehicle: NA8
- Location: Moruya, NSW
Re: Diff specialist south east melbourne
Likewise Transdiff in Bayswater. They installed a Mazda Torsen for me 2 or 3 years ago. Not a problem in 40,000kms and 20+ track days since.
’95 NA8
-
- Speed Racer
- Posts: 2114
- Joined: Tue Sep 11, 2007 12:13 pm
- Vehicle: ND - 2 GT
- Location: Melbourne
Re: Diff specialist south east melbourne
hey whats the price like for installing my 1.5 way LSD??
every ounce counts
-
- Forum Guru
- Posts: 4897
- Joined: Mon Apr 24, 2006 7:27 pm
- Vehicle: NA8
- Location: Moruya, NSW
Re: Diff specialist south east melbourne
Wun, charges then were around $140-160 if you took the diff assembly out yourself and just gave it to them along with the new centre. I've taken the diff out of mine a few times in the garage. It's a horrible job on stands, involving very large dirty things being lifted and manipulated in bad positions with stuff-all room. 4-6 hours to get in in and out at home, probably less than half that on a hoist with air tools.
’95 NA8
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 121 guests