Diff specialist south east melbourne

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

drftmx5
Learner Driver
Posts: 17
Joined: Fri Apr 02, 2010 10:54 pm
Vehicle: NA6

Diff specialist south east melbourne

Postby drftmx5 » Fri Jul 30, 2010 12:28 am

Hi

Just purchased an LSD. Can anyone recommend a diff specialist in the south east Melbourne area ?

I have spoken to keysborough diffs in Dandenong. Anyone used them before ?
Image

rascal
Racing Driver
Posts: 1770
Joined: Fri May 16, 2008 1:39 pm
Vehicle: NB8A
Location: FarSE Melbourne

Re: Diff specialist south east melbourne

Postby rascal » Fri Jul 30, 2010 2:07 pm

I had a diff welded up (CIG Locker) for my prev track car by them 10 yrs ago.

10yrs, two sets of axles (splines twisted due to power), and 50 track days later, the diff still worked perfectly.

I'd definitely recommend them based on my experience...

manga_blue
Forum Guru
Posts: 4897
Joined: Mon Apr 24, 2006 7:27 pm
Vehicle: NA8
Location: Moruya, NSW

Re: Diff specialist south east melbourne

Postby manga_blue » Fri Jul 30, 2010 9:16 pm

Likewise Transdiff in Bayswater. They installed a Mazda Torsen for me 2 or 3 years ago. Not a problem in 40,000kms and 20+ track days since.
’95 NA8

wun911
Speed Racer
Posts: 2114
Joined: Tue Sep 11, 2007 12:13 pm
Vehicle: ND - 2 GT
Location: Melbourne

Re: Diff specialist south east melbourne

Postby wun911 » Mon Aug 02, 2010 1:47 am

hey whats the price like for installing my 1.5 way LSD??
every ounce counts

manga_blue
Forum Guru
Posts: 4897
Joined: Mon Apr 24, 2006 7:27 pm
Vehicle: NA8
Location: Moruya, NSW

Re: Diff specialist south east melbourne

Postby manga_blue » Mon Aug 02, 2010 9:59 pm

Wun, charges then were around $140-160 if you took the diff assembly out yourself and just gave it to them along with the new centre. I've taken the diff out of mine a few times in the garage. It's a horrible job on stands, involving very large dirty things being lifted and manipulated in bad positions with stuff-all room. 4-6 hours to get in in and out at home, probably less than half that on a hoist with air tools.
’95 NA8


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 110 guests