OK
Patchys front lights died tonight.
headlights are up
will not come down when switched off.
lights inside work.
no high beam or low beam.
rear lights & number plate lights work.
where do I start checking?
its an NA6
front lights are dead.
Moderators: timk, Stu, zombie, Andrew, -alex, miata
- StanTheMan
- Forum legend
- Posts: 6824
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NA6
- Location: Balgowlah
front lights are dead.
Satans Ride called F33nix the resurrected NA6
- Locutus
- Racing Driver
- Posts: 879
- Joined: Thu Jul 26, 2007 7:39 pm
- Vehicle: NB SP
- Location: Sydney
- Contact:
Re: front lights are dead.
start with fuses, then relays
check the block in the engine bay first.
check the block in the engine bay first.
- StanTheMan
- Forum legend
- Posts: 6824
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NA6
- Location: Balgowlah
Re: front lights are dead.
yep its a blow fuse indeed.
so I replaced it with another & it worked for 2 seconds before it blew again.
looks like the bug hunt under the butchered dash is the go.
I hate electrics.
so I replaced it with another & it worked for 2 seconds before it blew again.
looks like the bug hunt under the butchered dash is the go.
I hate electrics.
Satans Ride called F33nix the resurrected NA6
- StanTheMan
- Forum legend
- Posts: 6824
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NA6
- Location: Balgowlah
Re: front lights are dead.
so Off to Supercrap it was this morning to get some more fuses & some spare ones because I'm sure to blow a few to fix this.
I replaced the blown 30 amp one with a 40 amp one so hopefully it would last a little longer as I was told this was something a little more major.
Look for melted wiring I was told in no uncertain terms.
So As I'm switching the light switch on & off I notice smoke appearing from under the drivers side light. bingo.
unbolt the covers & the plot thickens.
the plug is melting. Its melted enough to short the system. Its been melting slowly for some time.
so a new plug was found & re-wired.
a new plug with appropriate size wiring was attached. It came from a 1965 Holden Premier.
and the lights are back in action. As well as being a little brighter than before.
relieved & happy. And many thanks to a sparky friend who drives a beautiful 1965 Holden Premier.
I replaced the blown 30 amp one with a 40 amp one so hopefully it would last a little longer as I was told this was something a little more major.
Look for melted wiring I was told in no uncertain terms.
So As I'm switching the light switch on & off I notice smoke appearing from under the drivers side light. bingo.
unbolt the covers & the plot thickens.
the plug is melting. Its melted enough to short the system. Its been melting slowly for some time.
so a new plug was found & re-wired.
a new plug with appropriate size wiring was attached. It came from a 1965 Holden Premier.
and the lights are back in action. As well as being a little brighter than before.
relieved & happy. And many thanks to a sparky friend who drives a beautiful 1965 Holden Premier.
Satans Ride called F33nix the resurrected NA6
- Benny
- Speed Racer
- Posts: 2607
- Joined: Wed Apr 23, 2003 11:00 am
- Vehicle: NB SP
- Location: Gorgeous Sydney
- Contact:
Re: front lights are dead.
Glad to hear you fixed it Stephan.
On another note, I see you going to work quite often in the mornings when you turn into River Rd at Greenwich (like this morning).
For a shop owner, you're lucky to get to start work so late!
On another note, I see you going to work quite often in the mornings when you turn into River Rd at Greenwich (like this morning).
For a shop owner, you're lucky to get to start work so late!
ALWAYS RUNNING, SP with Bilstein Coil Overs and Doof Doof sound. Member of the Fat Bastards Racing Team
- sliq
- Speed Racer
- Posts: 3414
- Joined: Sat Jan 13, 2007 12:33 am
- Vehicle: ND - 2 GT
- Location: Sydney
- Contact:
- StanTheMan
- Forum legend
- Posts: 6824
- Joined: Thu Apr 24, 2003 11:00 am
- Vehicle: NA6
- Location: Balgowlah
Re: front lights are dead.
Benny wrote:Glad to hear you fixed it Stephan.
On another note, I see you going to work quite often in the mornings when you turn into River Rd at Greenwich (like this morning).
For a shop owner, you're lucky to get to start work so late!
All is not as it seems.
i'll have to start watching out for you.
I absolutley despise electrics.....& freak at the prospect of any electrical issues.
Satans Ride called F33nix the resurrected NA6
Return to “MX5 Audio, Electronics & Lighting”
Who is online
Users browsing this forum: No registered users and 244 guests