Simple thread, simple questions.
I've got a set of springs off an NA, will they fit my NB?
Just springs only, so it would be NB shocks, perches, tophats, etc. and Only NA Springs.
thanks.
Na springs on NB ?
Moderators: timk, Stu, zombie, Andrew, -alex, miata
- hks_kansei
- Speed Racer
- Posts: 6154
- Joined: Tue Feb 03, 2009 10:43 am
- Vehicle: NB8A
- Location: Victoria
Na springs on NB ?
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)
- Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Re: Na springs on NB ?
im guessing they will fit..
as people say that NB springs on a NA the car will sit higher
i guess its the opposite
NA springs on a NB the car will sit lower than they would have on the NA
make sense?? haha i think i have confused even myself
as people say that NB springs on a NA the car will sit higher
i guess its the opposite
NA springs on a NB the car will sit lower than they would have on the NA
make sense?? haha i think i have confused even myself
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
-
- Driver
- Posts: 66
- Joined: Sat Oct 10, 2009 9:17 pm
- Vehicle: Clubman
Re: Na springs on NB ?
You'll have to check the spring end conditions. Comparing NA Bilsteins to NB Bilsteins the spring perches are different (NA flat both ends, NB flat only one end). I think this means it isn't a great idea.
- philz
- Wheel guru
- Posts: 1297
- Joined: Wed Jun 04, 2008 4:32 pm
- Vehicle: ND - 2 GT
- Location: Sydney
Re: Na springs on NB ?
no they wont fit.
-
- Speed Racer
- Posts: 11857
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: Na springs on NB ?
as per philz & stb - spring ends are different, i.e. squared versus tapered spring ends.
- Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Re: Na springs on NB ?
sorry to bring back a old thread..
but will a NB koni/King setup bolt up to a NA?
but will a NB koni/King setup bolt up to a NA?
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
-
- Speed Racer
- Posts: 11857
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Re: Na springs on NB ?
Regie wrote:sorry to bring back a old thread...
but will a NB koni/King setup bolt up to a NA?
factory shock & spring combo will if you use the entire combo & fittings, but from memory it will sit a little higher. so if you can compare the koni/ kings to factory nb shock & spring combo you should get a definitive answer.
Return to “MX5 Wheels, Suspension, Brakes & Tyres”
Who is online
Users browsing this forum: No registered users and 223 guests