Idle abnormally low after installing Intake?!Any pros help!!

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

Oscar B
Driver
Posts: 35
Joined: Thu Apr 29, 2010 5:35 pm
Vehicle: NA8
Location: NSW Sydney

Idle abnormally low after installing Intake?!Any pros help!!

Postby Oscar B » Sat May 22, 2010 2:39 am

so after getting the secret weapon intake installed..
i found out i couldn't start the engine in first take..........
or once i start the engine,i have to run the car,otherwise my idle will drop and stall..

whys that?

User avatar
Bauer
Fast Driver
Posts: 349
Joined: Thu Dec 10, 2009 8:49 pm
Vehicle: NB8A
Location: Launceston, Tas

Idle abnormally low after installing Intake?!Any pros help!!

Postby Bauer » Sat May 22, 2010 11:43 am

NB air temp sensor issue?? isnt that part of the intake on an NB? only a wild guess though. Is it plugged in? did you bust a wire or something?

Nothing "should" change if you simply added an intake to an NA
cheers
Stu

User avatar
StanTheMan
Forum legend
Posts: 6824
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NA6
Location: Balgowlah

Idle abnormally low after installing Intake?!Any pros help!!

Postby StanTheMan » Sat May 22, 2010 11:51 am

The basics. Usually airleaks will increase idle.....but check anyway. Airleaks also make the idle a bit erratic
as well as making it take its time to get back to idle when reved freely.

maybe reset the idle to where it should be & see what happens.

Unlikley but not impossible.
Your o2 sensor is farked......can cause problems with idle & fuel consupmntion.
would be pretty freaky if it decided to give up the ghost at the exact moment you installed your air intake.
Satans Ride called F33nix the resurrected NA6

RG.net
Racing Driver
Posts: 1692
Joined: Thu Apr 06, 2006 7:48 pm
Vehicle: NA6
Location: Sydney
Contact:

Idle abnormally low after installing Intake?!Any pros help!!

Postby RG.net » Sat May 22, 2010 11:52 am

I'm guessing you bought Jason's intake?

Did you plug all the lines into the intake? ( i think there is 3 from memory)
http://Run-It-Hard.com - We're here to have fun!

manga_blue
Forum Guru
Posts: 4897
Joined: Mon Apr 24, 2006 7:27 pm
Vehicle: NA8
Location: Moruya, NSW

Idle abnormally low after installing Intake?!Any pros help!!

Postby manga_blue » Sat May 22, 2010 12:18 pm

Re-check fit and connections to MAF and intake air temp sensors.
’95 NA8

Oscar B
Driver
Posts: 35
Joined: Thu Apr 29, 2010 5:35 pm
Vehicle: NA8
Location: NSW Sydney

Idle abnormally low after installing Intake?!Any pros help!!

Postby Oscar B » Sat May 22, 2010 12:39 pm

forgot to mention..it fit on NA8..

and yeh i bought jason's intake

RG.net : 3...i only plugged 2 i think and the airflow sensor in between.

I m not too sure I will have a double check on those cases you guys have mentioned


Thanks so much

93_Clubman
Speed Racer
Posts: 11857
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Idle abnormally low after installing Intake?!Any pros help!!

Postby 93_Clubman » Sat May 22, 2010 12:54 pm

also if you haven't already, the iac pipe off the bottom of the throttle body will need to be plumbed into the new intake otherwise it will stall

User avatar
Okibi
Speed Racer
Posts: 10901
Joined: Thu Aug 21, 2003 11:00 am
Vehicle: NB SE
Location: Perth, Western Australia
Contact:

Idle abnormally low after installing Intake?!Any pros help!!

Postby Okibi » Sat May 22, 2010 1:30 pm

Could you upload some photos? It might help us work out what could be wrong.

Make sure your AFM (air flow meter) is plugged in propperly, did you reoil the filter, it could have gummed up your AFM. Make sure the hose from your cam cover to the intake is installed properly. Where has the temp sensor been relocated to?
If you had access to a car like this, would you take it back right away? Neither would I.


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 143 guests