Si.G's NA6

Chat to do with your MX5/Miata/Eunos Garage Ride(s).

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

Post Reply
Si.G
Fast Driver
Posts: 416
Joined: Sat Mar 07, 2009 12:38 pm
Vehicle: NA6
Location: Perth, WA

Si.G's NA6

Postby Si.G » Sun May 09, 2010 9:14 pm

Ok,

Got the job done.

Phase 3 took a while because I had to weld some plates to the chassis, so that I have captive nuts to bolt to. Obviously this is not a job you want to mess up :D

Image

Image

Image

Unfortunately my diff mounts did not arrived in time, so I will have to take the diff back off again at some point.

I was a little worried that the brace might not make that much difference and that I was putting in a lot of effort for little change. However this is not the case! Just rolling the car over the bump at the end of our drive feels totally different, much tighter. I have not been for a long drive yet because I need the alignment doing, but I think it will be like a differnt car.

Next job -- Adjustable top arms on the rear. Going to use cam bolts, like the ones on the lower arms.

Si.
NA6 B6T
Barbagallo Raceway : Long Track 67.394, Short Track 56.755
Top
Si.G
Fast Driver
Posts: 416
Joined: Sat Mar 07, 2009 12:38 pm
Vehicle: NA6
Location: Perth, WA

Si.G's NA6

Postby Si.G » Wed May 19, 2010 1:36 am

The diff mounts arrived, so the diff has been off the car again.

Image

Image

I will be doing a sprint on Sunday, so all being well, I will stop missing 3rd and going to 5th.

Si.
NA6 B6T
Barbagallo Raceway : Long Track 67.394, Short Track 56.755
Top
Si.G
Fast Driver
Posts: 416
Joined: Sat Mar 07, 2009 12:38 pm
Vehicle: NA6
Location: Perth, WA

Si.G's NA6

Postby Si.G » Wed May 19, 2010 11:18 pm

I was not going to fit my brake bias valve so soon, because the brake unions did not want to come undone with risking messing up the nuts. However, now that I am armed with my new flared spanners, there is not problem, so here it is - flyin Miata kit. Very easy to fit, not really dríven the car yet or set it up. Sprint on Sunday, so we shall see how we go.

Image

Si.
NA6 B6T
Barbagallo Raceway : Long Track 67.394, Short Track 56.755
Top
User avatar
StanTheMan
Forum legend
Posts: 6824
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NA6
Location: Balgowlah

Si.G's NA6

Postby StanTheMan » Thu May 20, 2010 7:20 am

ohhhhh!!!! Brace Bling. :mrgreen: :mrgreen: 8)
Satans Ride called F33nix the resurrected NA6
Top
Si.G
Fast Driver
Posts: 416
Joined: Sat Mar 07, 2009 12:38 pm
Vehicle: NA6
Location: Perth, WA

Si.G's NA6

Postby Si.G » Fri May 21, 2010 1:14 am

StanTheMan wrote:ohhhhh!!!! Brace Bling. :mrgreen: :mrgreen: 8)


It looks chrome, but it is gloss black - $3 a tin at bunnings :D
NA6 B6T
Barbagallo Raceway : Long Track 67.394, Short Track 56.755
Top
Si.G
Fast Driver
Posts: 416
Joined: Sat Mar 07, 2009 12:38 pm
Vehicle: NA6
Location: Perth, WA

Si.G's NA6

Postby Si.G » Fri May 21, 2010 1:19 am

Some things are not to be missed. I was planning on spending money on more power next, but this came up $350 :shock: (unfortunately a WA club member lost their MX5 to the recent hail storm :( )

Before - Image After - Image

Image

I have given a section of it a clean, t-cut and polish and it is now the same colour as my car. There are a few scratches on the front lip and at the back but $350 :shock: I am not complaining.
(as you can see my car is all different colours anyway since some dude did a U-turn in front of me)

I think the weight will be similar or lighter than my soft top, so from a performance perspective, I think I will roughly break even. BUT - man does it make an immediate difference to the chassis stiffness - I am sure some people will disagree, but my car is 20 years old now :D It just feels different, tighter when riding bumps.

Si.
NA6 B6T
Barbagallo Raceway : Long Track 67.394, Short Track 56.755
Top
User avatar
Okibi
Speed Racer
Posts: 10899
Joined: Thu Aug 21, 2003 11:00 am
Vehicle: NB SE
Location: Perth, Western Australia
Contact:
Contact Okibi

Si.G's NA6

Postby Okibi » Fri May 21, 2010 2:51 am

Good score Simon!
If you had access to a car like this, would you take it back right away? Neither would I.
Top
Si.G
Fast Driver
Posts: 416
Joined: Sat Mar 07, 2009 12:38 pm
Vehicle: NA6
Location: Perth, WA

Si.G's NA6

Postby Si.G » Sun May 23, 2010 9:49 pm

Here are some vids of today's WA sprint round. Quality is not great, they were done with a point and shoot camera fastened to the roll bar with hose clips :D

http://www.youtube.com/watch?v=q0sTVzRoTxQ

http://www.youtube.com/watch?v=Wu-eGMrdTtA

http://www.youtube.com/watch?v=QnwDLTG3SGw

http://www.youtube.com/watch?v=5zo4tv0FQY0

si
NA6 B6T
Barbagallo Raceway : Long Track 67.394, Short Track 56.755
Top
User avatar
Jeo
Speed Racer
Posts: 3648
Joined: Thu Jun 26, 2008 9:33 am
Vehicle: NB8B
Location: Canberra

Si.G's NA6

Postby Jeo » Sun May 23, 2010 10:19 pm

Very nice mate. Keep up the good work.
Top
User avatar
Okibi
Speed Racer
Posts: 10899
Joined: Thu Aug 21, 2003 11:00 am
Vehicle: NB SE
Location: Perth, Western Australia
Contact:
Contact Okibi

Si.G's NA6

Postby Okibi » Sun May 23, 2010 10:37 pm

I think I spotted you on Leech Hwy this afternoon about 4ish, took me a second to realise it was probably you because the car was running a soft top.
If you had access to a car like this, would you take it back right away? Neither would I.
Top
Si.G
Fast Driver
Posts: 416
Joined: Sat Mar 07, 2009 12:38 pm
Vehicle: NA6
Location: Perth, WA

Si.G's NA6

Postby Si.G » Mon May 24, 2010 12:41 am

Okibi wrote:I think I spotted you on Leech Hwy this afternoon about 4ish, took me a second to realise it was probably you because the car was running a soft top.


Yeap - probably on my way home from the sprint event.
NA6 B6T
Barbagallo Raceway : Long Track 67.394, Short Track 56.755
Top
User avatar
Okibi
Speed Racer
Posts: 10899
Joined: Thu Aug 21, 2003 11:00 am
Vehicle: NB SE
Location: Perth, Western Australia
Contact:
Contact Okibi

Si.G's NA6

Postby Okibi » Mon May 24, 2010 1:17 am

Have you had any luck with the quads? I think there was mention of a cheap ebay adaptor on clubroadster (the author did mention they had to slightly enlarge the adaptor ports to make it more efficient ) .
If you had access to a car like this, would you take it back right away? Neither would I.
Top
Nocturnal
Driver
Posts: 71
Joined: Wed Dec 17, 2008 5:17 pm

Si.G's NA6

Postby Nocturnal » Mon May 24, 2010 1:41 pm

Very nice diary. Love what you're doing with the car, especially with your own hands.
Top
Si.G
Fast Driver
Posts: 416
Joined: Sat Mar 07, 2009 12:38 pm
Vehicle: NA6
Location: Perth, WA

Si.G's NA6

Postby Si.G » Wed May 26, 2010 12:24 am

Okibi wrote:Have you had any luck with the quads? I think there was mention of a cheap ebay adaptor on clubroadster (the author did mention they had to slightly enlarge the adaptor ports to make it more efficient ) .


The adapter keeps the toyota manifold and injectors, etc. I really want to just use the throttle bodies.

Hoping to get a manifold made in the next week or so. Looked at buying a full manifold from the same company that you can get an adapter from, but the extra cost of a custom made one is not enough to take the risk on an internet part that is un-tried.

I have done some home work, and inlet plate size on the AE101 should be suit to the power I will ultimately be look for so that is good. The only other thing is runner length, but I think I might be constrained by my brake lines, so there is probably a re-route of those to think about.

Keep an eye out for more updates - unlikely to be done before the sprint event though :(

Si.
NA6 B6T
Barbagallo Raceway : Long Track 67.394, Short Track 56.755
Top
module22
Driver
Posts: 37
Joined: Sun Jan 11, 2009 5:29 pm
Vehicle: NA6
Location: Western Sydney

Si.G's NA6

Postby module22 » Thu May 27, 2010 7:55 pm

Such an awesome diary!!

hope to see moar. :D
back in the game. NA6 oots oots
Top
Post Reply

Return to “MX5 Garage Chat”

Who is online

Users browsing this forum: No registered users and 24 guests