What oil should I use for my new cusco RS 1.5way?
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
- mxfive95
- Fast Driver
- Posts: 285
- Joined: Mon Oct 20, 2008 6:58 pm
- Vehicle: NA6
- Location: carnegie, Melb
What oil should I use for my new cusco RS 1.5way?
Hi all,
I'm going to install my new Lsd this wknd with my mechanic and wondering which oil to use. It's going into my original diff housing on an NA8.
Cheers craig
I'm going to install my new Lsd this wknd with my mechanic and wondering which oil to use. It's going into my original diff housing on an NA8.
Cheers craig
The bumper sticker on my porsche
"My other car is an mx5"
"My other car is an mx5"
- Hellmun
- Racing Driver
- Posts: 979
- Joined: Sat Feb 10, 2007 1:15 pm
- Vehicle: NB8B - Turbo
- Location: Wollongong,NSW
What oil should I use for my new cusco RS 1.5way?
Well I've got a 2 way Tomei Traxx and I've ran Royal purple 75-90 gear oil. Which I managed to burn.... Penrite Sin 75 has been good so far. It seems to have more lim-slip additive as it reduced the chattering more than the Royal Purp. I will say it was an endurance race that killed the royal purple which most people won't use their cars in
- mx52nv
- Purple Porsche Eater
- Posts: 1345
- Joined: Tue Sep 20, 2005 5:13 am
- Vehicle: Non MX-5
- Location: Perth
What oil should I use for my new cusco RS 1.5way?
SAE75W/90 Gear oil - most of the WA crowd uses Redline Shockproof.
You will need 1 liter or 1.06 quartz (two bottles) for a NA8/NB8 diff.
I suspect the NC will require a little more.
Les
You will need 1 liter or 1.06 quartz (two bottles) for a NA8/NB8 diff.
I suspect the NC will require a little more.
Les
- Charlie Brown
- Speed Racer
- Posts: 2623
- Joined: Mon Apr 28, 2003 11:00 am
- Vehicle: NC
- Location: Sydney, Just out of Dragon Territory over the bridge in the "Shire"
- Contact:
What oil should I use for my new cusco RS 1.5way?
mx52nv wrote:SAE75W/90 Gear oil - most of the WA crowd uses Redline Shockproof.
You will need 1 liter or 1.06 quartz (two bottles) for a NA8/NB8 diff.
I suspect the NC will require a little more.
Les
The NC is actually less. 0.7 litres GL-5 90 for the diff. Gearbox is 2.1 litres GL-4 75W 90.
-
- Racing Driver
- Posts: 1770
- Joined: Fri May 16, 2008 1:39 pm
- Vehicle: NB8A
- Location: FarSE Melbourne
What oil should I use for my new cusco RS 1.5way?
I use Penrite Sin 80 (80W-140) in my Mazdaspeed 1.5?way.
Changed it after the first track day break-in and its been excellent (quiet, no chatter) ever since..
Changed it after the first track day break-in and its been excellent (quiet, no chatter) ever since..
- Locutus
- Racing Driver
- Posts: 879
- Joined: Thu Jul 26, 2007 7:39 pm
- Vehicle: NB SP
- Location: Sydney
- Contact:
What oil should I use for my new cusco RS 1.5way?
i'm surprised all oils mentioned so far are not labelled LSD compatible by their manufacturers.
i'm in the same situation and am currently eyeing motul 90PA.
i'm in the same situation and am currently eyeing motul 90PA.
-
- Speed Racer
- Posts: 2114
- Joined: Tue Sep 11, 2007 12:13 pm
- Vehicle: ND - 2 GT
- Location: Melbourne
What oil should I use for my new cusco RS 1.5way?
Hrmz kazz make their own LSD diff oil I was thinking of bying a tin of that.
Can you use the same oil that you use for the gear box MT90?
Can you use the same oil that you use for the gear box MT90?
every ounce counts
- mx52nv
- Purple Porsche Eater
- Posts: 1345
- Joined: Tue Sep 20, 2005 5:13 am
- Vehicle: Non MX-5
- Location: Perth
What oil should I use for my new cusco RS 1.5way?
Cusco LSD Oil Group Buy?
Les @ MX5 Shop
Les @ MX5 Shop
-
- Speed Racer
- Posts: 2114
- Joined: Tue Sep 11, 2007 12:13 pm
- Vehicle: ND - 2 GT
- Location: Melbourne
What oil should I use for my new cusco RS 1.5way?
Sorry I'm not really willing to wait for another GB.
I think you can get it locally, around 60 dollars for a 1 L tin.
I think you can get it locally, around 60 dollars for a 1 L tin.
every ounce counts
- Hellmun
- Racing Driver
- Posts: 979
- Joined: Sat Feb 10, 2007 1:15 pm
- Vehicle: NB8B - Turbo
- Location: Wollongong,NSW
What oil should I use for my new cusco RS 1.5way?
Locutus wrote:i'm surprised all oils mentioned so far are not labelled LSD compatible by their manufacturers.
i'm in the same situation and am currently eyeing motul 90PA.
I called Hi-Octane in Sydney when I got the Tomei Diff as they're the australian distributor. He said they run the Royal Purple Max gear with all their cars. They've made a few weapons so figured they were a good source. The Royal purple lasted 30,000km but then it's tracked non-stop. So I probaly should've changed it earlier...
-
- Racing Driver
- Posts: 1717
- Joined: Thu Apr 15, 2010 7:23 pm
- Vehicle: NB8B
- Location: Rockingham - Western Australia
What oil should I use for my new cusco RS 1.5way?
My NA8 has got an unknown LSD in it. Low speed / tight maneuvering is hard work with juddering and all sorts of funny noises so its definitely an aftermarket one of some sort.
I have got in my shed an unopened bottle of Limslip 90 Extra heavy duty SAE 80W90, API GL-5/6. Would this be okay to use?
I have got in my shed an unopened bottle of Limslip 90 Extra heavy duty SAE 80W90, API GL-5/6. Would this be okay to use?
- fattima
- Racing Driver
- Posts: 602
- Joined: Thu Aug 23, 2007 5:49 am
- Vehicle: ND - 2 GT
- Location: Melbourne
What oil should I use for my new cusco RS 1.5way?
Are you sure it is an LSD? Could be a locked diff by the sound of it.
I used to run Limslip in my plate type diff of my Escort with no probs.
I used to run Limslip in my plate type diff of my Escort with no probs.
-
- Racing Driver
- Posts: 1717
- Joined: Thu Apr 15, 2010 7:23 pm
- Vehicle: NB8B
- Location: Rockingham - Western Australia
What oil should I use for my new cusco RS 1.5way?
I don't think it is locked. I have not really had a chance to 'make progress' properly but it feels like my old Mk1 MR2 did with a harsh KAAZ clutch type LSD...behaved like a locked diff at low speed but felt normal on the move.
I just want the thing to be a bit quieter and less juddery. I'm thinking part of the problem may be that it has not been done in a long time!
I just want the thing to be a bit quieter and less juddery. I'm thinking part of the problem may be that it has not been done in a long time!
- 16bit
- Speed Racer
- Posts: 2346
- Joined: Wed Nov 29, 2006 1:51 pm
- Vehicle: NB8A - Supercharged
- Location: Brisbane Southside
What oil should I use for my new cusco RS 1.5way?
that limslip 90 sounds fine. those are the same oil specs that kaaz recommend too.
i just bought some nulon lsd oil which has simlar specs to those.
http://www.nulon.com.au/products/SAE_90 ... ntial_Oil/
i just bought some nulon lsd oil which has simlar specs to those.
http://www.nulon.com.au/products/SAE_90 ... ntial_Oil/
98 evo gold - rotrexed and loving it.
This post has been printed using recycled pixels
This post has been printed using recycled pixels
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 200 guests