Babalouie wrote:93_Clubman wrote:dubly wrote: A dyno will always have the hp and torque crossing at 5250 RPM. Any change and it has been screwed with.
don't have dyno sheets with me but will check them out with interest soon...
You might find that the dyno chart just shows the power curve and the air/fuel ratio. Usually that's all that they show...
as you say babs - the last two dyno sheets show power curve & air/fuel ratio on y axis with kph on x axis. as the mods were done in steps i have a couple of other dyno sheets interstate which i'll have a look at shortly. btw, in the spirit of transparency, i forgot to mention unichip was tuned for 98 octane. thanks to all for comments on the car & mods.