Horn not horning...what could it be?

Audio, Electronics and Lighting questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

mitch_f1
Racing Driver
Posts: 858
Joined: Wed Jun 17, 2009 8:59 pm
Vehicle: NA6
Location: Sydney

Horn not horning...what could it be?

Postby mitch_f1 » Tue Mar 09, 2010 9:26 pm

So I recently tried to remove my steering wheel to replace it, but it would not budge, so I gave up. Since then my horn button is not working. I took the horn button off, and and took it apart, everything seems to be fine with no corrosion or anything. What could it be?

User avatar
7Hazi
Fast Driver
Posts: 156
Joined: Sun Apr 19, 2009 11:49 am
Vehicle: NA8
Location: Brisbane

Horn not horning...what could it be?

Postby 7Hazi » Tue Mar 09, 2010 9:39 pm

I had the same problem on my NA8 (horn not going off when I push the button) except, in addition, my horn would just go off randomly when the car was parked... for example, at 6 in the morning when I'm trying to sleep :lol: . Check the connections to the horn and the wires around it (behind the front bar). Upon doing thing I found mine weren't connected properly and the insulation on the wires was falling off.

mitch_f1
Racing Driver
Posts: 858
Joined: Wed Jun 17, 2009 8:59 pm
Vehicle: NA6
Location: Sydney

Horn not horning...what could it be?

Postby mitch_f1 » Tue Mar 09, 2010 9:49 pm

nup, no fix. I had a similar issue a little while back while trying to perform the same opperation, and it was fixed by a little jiggle of the horn button while in the steering wheel? I'm thinking it might be in the boss???

RG.net
Racing Driver
Posts: 1692
Joined: Thu Apr 06, 2006 7:48 pm
Vehicle: NA6
Location: Sydney
Contact:

Horn not horning...what could it be?

Postby RG.net » Wed Mar 10, 2010 1:18 pm

How is the ground wire connected?

Grab a piece of wire, connect it to the horn button and touch the inside of the boss (exposed metal), then press the horn button. if that works then the current ground connection is loose.
http://Run-It-Hard.com - We're here to have fun!

User avatar
Lokiel
Forum legend
Posts: 4126
Joined: Thu May 28, 2009 2:39 pm
Vehicle: NB SE
Location: Brisbania

Horn not horning...what could it be?

Postby Lokiel » Wed Mar 10, 2010 2:00 pm

Have you checked the 15A fuse under the hood?
Don't worry about dying, worry about not living!
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716

mitch_f1
Racing Driver
Posts: 858
Joined: Wed Jun 17, 2009 8:59 pm
Vehicle: NA6
Location: Sydney

Horn not horning...what could it be?

Postby mitch_f1 » Wed Mar 10, 2010 2:04 pm

tried, and nope

15A fuse intact

User avatar
bruce
Speed Racer
Posts: 7706
Joined: Fri Apr 25, 2003 11:00 am
Vehicle: NA8 - Turbo
Location: Victoria
Contact:

Horn not horning...what could it be?

Postby bruce » Wed Mar 10, 2010 2:18 pm

In the NA, there's another fuse under the dash next to the drivers footwell. You have to be a contortionist to get to it.

mitch_f1
Racing Driver
Posts: 858
Joined: Wed Jun 17, 2009 8:59 pm
Vehicle: NA6
Location: Sydney

Horn not horning...what could it be?

Postby mitch_f1 » Wed Mar 10, 2010 2:21 pm

Mine is all in Japanese, do you know which one it is specifically?

Just took them all out, and they looked fine. But maybe if i replace just the horn one there is a fault that I can't see in it??? (fingers crossed)

User avatar
bruce
Speed Racer
Posts: 7706
Joined: Fri Apr 25, 2003 11:00 am
Vehicle: NA8 - Turbo
Location: Victoria
Contact:

Horn not horning...what could it be?

Postby bruce » Wed Mar 10, 2010 2:41 pm

Can't remember which one it is (I used the guide on the lid, but yours is in Japanese).

mitch_f1
Racing Driver
Posts: 858
Joined: Wed Jun 17, 2009 8:59 pm
Vehicle: NA6
Location: Sydney

Horn not horning...what could it be?

Postby mitch_f1 » Wed Mar 10, 2010 2:46 pm

Could someone do me a huge favour and find out which one it is on their NA6. I have the workshop manual but can't make out the one for horn

mitch_f1
Racing Driver
Posts: 858
Joined: Wed Jun 17, 2009 8:59 pm
Vehicle: NA6
Location: Sydney

Horn not horning...what could it be?

Postby mitch_f1 » Wed Mar 10, 2010 2:57 pm

Image

That is what mine looks like

93_Clubman
Speed Racer
Posts: 11854
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Horn not horning...what could it be?

Postby 93_Clubman » Wed Mar 10, 2010 3:33 pm

just checked mine (na8), which has the same amp fuses in exactly the same positions, but none of them are marked 'horn', however na8 owner's handbook states that the 'stop' fuse also is for the horn. 'stop' fuse is the middle 10 amp fuse, i.e. the 10 amp fuse marked 10A above the 'H' in '(FB200102H)' in your pic.

mitch_f1
Racing Driver
Posts: 858
Joined: Wed Jun 17, 2009 8:59 pm
Vehicle: NA6
Location: Sydney

Horn not horning...what could it be?

Postby mitch_f1 » Wed Mar 10, 2010 7:36 pm

BUGGGEERRRR

So changed out that fuse, and nothing. Thanks for you help btw clubman

User avatar
Guran
Speed Racer
Posts: 3754
Joined: Sun Feb 15, 2009 6:42 pm
Vehicle: ND - 1.5
Location: Albion Park NSW
Contact:

Horn not horning...what could it be?

Postby Guran » Wed Mar 10, 2010 8:07 pm

Are you able to disconnect the horn itself? If so, you could try connecting it directly to a spare car battery to see if it still works. If it does, then you must have a bad connection somewhere along the way. Some checks with a multimeter would resolve it fairly quickly.
Standard 2006 NC - YouTube
WP 1:11.89 | SMP-S 1:05.90 GP 1:54.93 N 1:18.09 L 2:22.49 | PW 1:02.52
PI 2:00.55 | W-S 1:12.44 W-L 1:43.36 | SR 1:33.25

mitch_f1
Racing Driver
Posts: 858
Joined: Wed Jun 17, 2009 8:59 pm
Vehicle: NA6
Location: Sydney

Horn not horning...what could it be?

Postby mitch_f1 » Sun Mar 14, 2010 6:29 pm

okay so i am in the process of taking apart the steering column, but i cant follow the horn wire past the metal disc with the spring thing on it. Any idea on which plug, maybe even cable colour it comes out of?


Return to “MX5 Audio, Electronics & Lighting”

Who is online

Users browsing this forum: No registered users and 232 guests