Coilovers on a budget

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

User avatar
Mr nanotech
Racing Driver
Posts: 1487
Joined: Sat Jan 23, 2010 4:35 pm
Vehicle: NA6
Location: Rotting away in the 'Greater' City of Geelong...
Contact:

Coilovers on a budget

Postby Mr nanotech » Mon Feb 22, 2010 5:20 pm

To be blunt, I want adjustible coilovers but not prepared to pay out a grand. I found a few sets on ebay that don't seem to bad but I'm wondering if there are any horror stories you've heard with $300 coilover suspension sets. I know skimping out can be a bad idea, I hear that about a lot of cheap wheels cracking etc. But I mean for that price, it doesn't seem bad.

Are there any alternatives? .

So yeah Coilovers! Do tell! Also, does anyone know exactly how much Sportmax wheels weigh? (15x8)
Okibi wrote:Abusing Police because of a few corrupt or power hungry idiots is like calling all car enthusiasts hoons. :roll:

RG.net
Racing Driver
Posts: 1692
Joined: Thu Apr 06, 2006 7:48 pm
Vehicle: NA6
Location: Sydney
Contact:

Coilovers on a budget

Postby RG.net » Mon Feb 22, 2010 7:09 pm

those coilover sleeve kits are well .. dodgy.

if you were to use them, you would have bugger all travel, and never know what the spring rates are. You wouldn't even
know if the spring rates are the same at the front, and back.

The sportmax 513's are heavier then the 002's. Its safe to say these are inbetween 8-10kgs. ( i cant remember the exact weights).
http://Run-It-Hard.com - We're here to have fun!

User avatar
Okibi
Speed Racer
Posts: 10901
Joined: Thu Aug 21, 2003 11:00 am
Vehicle: NB SE
Location: Perth, Western Australia
Contact:

Coilovers on a budget

Postby Okibi » Mon Feb 22, 2010 11:30 pm

If you're on a tight budget wait for some 2nd hand items that are in good condition or just search for the right height springs and use the factory dampers.

Putting on dodgy shocks might not improve the handling and at worse could be quiet dangerous.
If you had access to a car like this, would you take it back right away? Neither would I.

User avatar
two40
Racing Driver
Posts: 722
Joined: Thu Sep 10, 2009 11:33 am
Vehicle: NA6
Location: Sydney South

Coilovers on a budget

Postby two40 » Tue Feb 23, 2010 8:53 am

Okibi wrote:If you're on a tight budget wait for some 2nd hand items that are in good condition


That ought to be your only option. A new $300 set will be a monumental waste of money.
George
WTB
- Early NA Radio
- Crash pad for '89 NA
headlightsgoup.com

User avatar
bruce
Speed Racer
Posts: 7708
Joined: Fri Apr 25, 2003 11:00 am
Vehicle: NA8 - Turbo
Location: Victoria
Contact:

Coilovers on a budget

Postby bruce » Tue Feb 23, 2010 11:02 am

$300 does not even buy you a set of springs! You get what you pay for.
Like everyone said, wait for a set of 2nd hand shocks.

User avatar
RawSouth
Fast Driver
Posts: 475
Joined: Sun May 04, 2008 10:47 pm
Vehicle: NB8B
Location: Sydney
Contact:

Coilovers on a budget

Postby RawSouth » Tue Feb 23, 2010 11:13 am

Great deals come up on the forum all the time.


I got the SE Bilstein shocks and springs from a member here for just a little more then what you are quoting....

They are brilliant.
ロードスター

User avatar
two40
Racing Driver
Posts: 722
Joined: Thu Sep 10, 2009 11:33 am
Vehicle: NA6
Location: Sydney South

Coilovers on a budget

Postby two40 » Tue Feb 23, 2010 1:03 pm

My SE Bilsteins might be up for sale soon. :D
George
WTB
- Early NA Radio
- Crash pad for '89 NA
headlightsgoup.com

User avatar
sliq
Speed Racer
Posts: 3414
Joined: Sat Jan 13, 2007 12:33 am
Vehicle: ND - 2 GT
Location: Sydney
Contact:

Coilovers on a budget

Postby sliq » Tue Feb 23, 2010 1:42 pm

two40 wrote:My SE Bilsteins might be up for sale soon. :D


he's looking for a set of adjustable coil overs.

think of it this way, its like buying some shitty nankang tires - its incredibly vital to your cars handling, i.e. an accident waiting to happen. i'd rather stick with oem than $300 el cheapos
i can't brain today.. i have the dumb..

Moto
Fast Driver
Posts: 293
Joined: Wed Jun 18, 2008 11:02 am
Vehicle: ND - 2 GT
Location: Melbourne

Coilovers on a budget

Postby Moto » Tue Feb 23, 2010 2:11 pm

You can't get something for nothing. Save the $1000 for BC Coilovers, it's the only way to do it.

Fatty
Speed Racer
Posts: 3175
Joined: Fri Feb 03, 2006 10:39 am
Vehicle: NA6
Location: Melbourne

Coilovers on a budget

Postby Fatty » Tue Feb 23, 2010 2:18 pm

someone in sydney was selling 30mm lowered king springs for $100. i have a set of clubman bilsteins that i'd let you have for $200. problem solved :mrgreen:

User avatar
Steampunk
Speed Racer
Posts: 4670
Joined: Wed Oct 10, 2007 9:16 am
Vehicle: NA6
Location: Southside of Breeze-bane

Coilovers on a budget

Postby Steampunk » Tue Feb 23, 2010 8:41 pm

Do you mean those sleeve kits? If so, you couldn't PAY me $300 to put them on.

Also, if these are the ones you are referring to, what dampers are you going to put them on? and how are you going to install the whole thing?
So dampers + installation = more $$

Why do you want coilovers in the first place? just for the sake of saying "I have coilovers on my car" ?
How often are you planning to raise and lower your car?

My opinion, BC coilovers are probably the cheapest complete set that are regarded as good quality units, but depending on your answer to my above questions, echoing what others stated, buy a set of complete used spring/damper Koni, Bilstein, Tein, etc etc

Once you realise the handling capabilities of the car, you'll come to realise that skimping on suspension, wheels, and tyres is a futile effort, .....not even mentioning safety.
Image

User avatar
Mr nanotech
Racing Driver
Posts: 1487
Joined: Sat Jan 23, 2010 4:35 pm
Vehicle: NA6
Location: Rotting away in the 'Greater' City of Geelong...
Contact:

Coilovers on a budget

Postby Mr nanotech » Tue Feb 23, 2010 10:02 pm

Fatty wrote:someone in sydney was selling 30mm lowered king springs for $100. i have a set of clubman bilsteins that i'd let you have for $200. problem solved :mrgreen:


Done! Pm me your details and get this organised!
Okibi wrote:Abusing Police because of a few corrupt or power hungry idiots is like calling all car enthusiasts hoons. :roll:

User avatar
green_comet
Car Detailing Guru
Posts: 1848
Joined: Tue May 24, 2005 1:41 am
Vehicle: NA8
Location: Melbourne

Coilovers on a budget

Postby green_comet » Wed Feb 24, 2010 9:26 am

Here you go Raceland coilovers. That price is in US and you would have to pay shipping on top, but they will might be around the $400au mark shipped. They have the NB kits on that site too if you have an NB.

Here is a review of them. Personally I would do what everyone else is saying and save up for a decent set.

RG.net
Racing Driver
Posts: 1692
Joined: Thu Apr 06, 2006 7:48 pm
Vehicle: NA6
Location: Sydney
Contact:

Coilovers on a budget

Postby RG.net » Wed Feb 24, 2010 5:45 pm

green_comet wrote:Here you go Raceland coilovers. That price is in US and you would have to pay shipping on top, but they will might be around the $400au mark shipped. They have the NB kits on that site too if you have an NB.

Here is a review of them. Personally I would do what everyone else is saying and save up for a decent set.


Jeez, i didn't realise Racelands were so cheap :shock:

If your truely after a height adjustable setup, these would be your best bet.
http://Run-It-Hard.com - We're here to have fun!

User avatar
Charlie Brown
Speed Racer
Posts: 2623
Joined: Mon Apr 28, 2003 11:00 am
Vehicle: NC
Location: Sydney, Just out of Dragon Territory over the bridge in the "Shire"
Contact:

Coilovers on a budget

Postby Charlie Brown » Thu Feb 25, 2010 9:33 am


Jeez, i didn't realise Racelands were so cheap :shock:

If your truely after a height adjustable setup, these would be your best bet.


Come on guys, have a little think about this for a minute.

These are cheap and I’m mean CHEAP rubbish.

You are talking about risking your car and life for what? The ability to lower the car to the height you want?

Hell it cost more than this for just a set of decent lowering springs and this set up throws in dampers as well!! Get real.

Don’t forget you need to add the cost to transport from the US. And that’s not cheap. I had a set of Eibach’s sent over and transport was $400, so you’re up for $650. You can’t even buy a cardboard coffin for that.

Start looking for a good quality second hand set from one of the known makers, Koni, Tein or Bilstein.
Image

Wakefield 1:09.13 Eastern Creek GP 1:50.198 Ext 2:17.538 Sth 1:02.9003
Phillip Is 1:58.50 Winton Short 1:10.7 Lakeside 1:05.7711 MDTC 45.20


Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 349 guests