Will a B6T oil pickup fit a BP motor?

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

Post Reply
rxmx
Fast Driver
Posts: 338
Joined: Tue Dec 16, 2003 11:43 pm
Vehicle: NA6 - Turbo
Location: Sydney

Will a B6T oil pickup fit a BP motor?

Postby rxmx » Sun Feb 21, 2010 4:38 pm

My motor is together finally but have mis placed the oil pickup tube. Will a B6T one fit ok as I have a B6T bottom end I can pull one from?

Thanks,
http://www.facebook.com/purefabcustom

EFR6758 run-in tune 259hp atw on 10psi pump 98 dyno dynamics

E85 tune - 445hp @ wheels 17psi
Top
manga_blue
Forum Guru
Posts: 4897
Joined: Mon Apr 24, 2006 7:27 pm
Vehicle: NA8
Location: Moruya, NSW

Will a B6T oil pickup fit a BP motor?

Postby manga_blue » Mon Feb 22, 2010 2:33 pm

If you mean the pipe and strainer that drops down from the oil pump then the Mazda parts catalogue lists them with 2 different numbers ...
91-92 B6 is B61P-14-240
95-96 BP is BPE8-14-240
... and the mounting brackets look different in the diagrams. Gaskets are different too.
’95 NA8
Top
rxmx
Fast Driver
Posts: 338
Joined: Tue Dec 16, 2003 11:43 pm
Vehicle: NA6 - Turbo
Location: Sydney

Will a B6T oil pickup fit a BP motor?

Postby rxmx » Mon Feb 22, 2010 10:40 pm

Yep thats the part im referring to. Thanks magna thats what I was needing to know... Looks like i'll need a new BP oil pick-up.

rxmx,
http://www.facebook.com/purefabcustom

EFR6758 run-in tune 259hp atw on 10psi pump 98 dyno dynamics

E85 tune - 445hp @ wheels 17psi
Top
Post Reply

Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 195 guests