So I've got a few tiny holes developing along some seam points in my soft top, and was wondering whether anyone has any tips for repair?
Failing that, does anyone know of somewhere in and around Perth that does soft top repair?
Tiny holes in soft top
Moderators: timk, Stu, zombie, Andrew, -alex, miata
- marcusus
- Speed Racer
- Posts: 2919
- Joined: Thu Jul 13, 2006 12:07 am
- Vehicle: NB8A
- Old Dude
- Racing Driver
- Posts: 1166
- Joined: Tue Apr 07, 2009 8:06 pm
- Vehicle: NB8B
- Location: Gold Coast
Tiny holes in soft top
Hi Marcusus
Have a look at this post below it has heaps of info and hoew to repair in. I used some canopy material off cut from a boat/motor trimmer cut a 100mm round patch and glued it with contact adhesive and its still looks good.
If it along the seam though it might be a different issue. You could try seam sealer for tents its in a stick that you rub on to seal the seam on tents.
viewtopic.php?f=28&t=38628&start=0&hilit=softop+repair
hope it helps
Cheers
Dale
Have a look at this post below it has heaps of info and hoew to repair in. I used some canopy material off cut from a boat/motor trimmer cut a 100mm round patch and glued it with contact adhesive and its still looks good.
If it along the seam though it might be a different issue. You could try seam sealer for tents its in a stick that you rub on to seal the seam on tents.
viewtopic.php?f=28&t=38628&start=0&hilit=softop+repair
hope it helps
Cheers
Dale
"Everybody dies......, but not everybody lives" ;-)
MX 5 2001 Grace Green
NB8B
MX 5 2001 Grace Green
NB8B
- Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Tiny holes in soft top
hey bloke....totally off topic...are you hitting up good vibes this weekend? im off to Perth tomorrow for the sets over there
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
- marcusus
- Speed Racer
- Posts: 2919
- Joined: Thu Jul 13, 2006 12:07 am
- Vehicle: NB8A
Tiny holes in soft top
Thanks for the info Dale. I'll check it out when I've got a bit more spare time, and my laptop isn't crapping itself.
Regie, not gonna be at good vibes. Anyone else coming over with you or are you flying solo?
Regie, not gonna be at good vibes. Anyone else coming over with you or are you flying solo?
- Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Tiny holes in soft top
marcusus wrote:Thanks for the info Dale. I'll check it out when I've got a bit more spare time, and my laptop isn't crapping itself.
Regie, not gonna be at good vibes. Anyone else coming over with you or are you flying solo?
solo bloke..but catching up with some mates at GV
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
- marcusus
- Speed Racer
- Posts: 2919
- Joined: Thu Jul 13, 2006 12:07 am
- Vehicle: NB8A
Tiny holes in soft top
Cool. If you feel like catching up, give me a bell.
Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: No registered users and 236 guests