Changing a Semi-Auto NC to Manual is it do able and worth it

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

User avatar
IB1ZA
Fast Driver
Posts: 209
Joined: Fri Feb 22, 2008 9:42 am
Vehicle: NC
Location: St Albans, Victoria AU
Contact:

Changing a Semi-Auto NC to Manual is it do able and worth it

Postby IB1ZA » Thu Dec 31, 2009 8:35 pm

I have a 2007 Semi-Auto NC. I really would rather to be able to swap the transmission instead of selling the car and getting a manual one.

Is it possible to swap the transmission and is the cost going to be worth it?
http://www.highclass.net.au/

tank
Learner Driver
Posts: 21
Joined: Fri Aug 01, 2008 11:48 am
Vehicle: ND - 2
Location: North Shore, Sydney

Changing a Semi-Auto NC to Manual is it do able and worth it

Postby tank » Thu Dec 31, 2009 11:56 pm

You'll need to find a wrecked manual transmission NC and get all the parts off it. Buying all the parts from Mazda will be very very costly. You'll probably need the ECU from the manual car as well.

User avatar
StanTheMan
Forum legend
Posts: 6824
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NA6
Location: Balgowlah

Changing a Semi-Auto NC to Manual is it do able and worth it

Postby StanTheMan » Fri Jan 01, 2010 9:41 am

isn't there 3 separate ECU's on the NC's?
Satans Ride called F33nix the resurrected NA6

User avatar
TieNN89
Speed Racer
Posts: 2012
Joined: Mon Nov 26, 2007 8:27 pm
Vehicle: NC
Location: Brisbane
Contact:

Changing a Semi-Auto NC to Manual is it do able and worth it

Postby TieNN89 » Fri Jan 01, 2010 3:48 pm

LOL like I told you before

Just sell yours and get a manual one

more than likely cheaper, less hassle,

and while your at you can get the facelifted version

And plus I doubt a converted NC would attract more value than one that is not converted


I don't know why your even considering converting it when the option of sell and buy is available

Fatty
Speed Racer
Posts: 3175
Joined: Fri Feb 03, 2006 10:39 am
Vehicle: NA6
Location: Melbourne

Changing a Semi-Auto NC to Manual is it do able and worth it

Postby Fatty » Fri Jan 01, 2010 3:52 pm

seems like it would be a very expensive project, fairly difficult, and i think it would affect the resale value of the car , a lot.

i'd just sell it and buy another... remove any mods you've done (such as that neat stereo install) and fit them to the new car.

User avatar
philz
Wheel guru
Posts: 1297
Joined: Wed Jun 04, 2008 4:32 pm
Vehicle: ND - 2 GT
Location: Sydney

Changing a Semi-Auto NC to Manual is it do able and worth it

Postby philz » Fri Jan 01, 2010 4:46 pm

Change cars, not worth it.

Adam_NAclubman
Racing Driver
Posts: 1418
Joined: Wed Jan 25, 2006 11:39 pm
Vehicle: NA8 - Turbo
Location: Adelaide, Australia
Contact:

Changing a Semi-Auto NC to Manual is it do able and worth it

Postby Adam_NAclubman » Fri Jan 01, 2010 7:31 pm

Semi-auto NC?

User avatar
16bit
Speed Racer
Posts: 2346
Joined: Wed Nov 29, 2006 1:51 pm
Vehicle: NB8A - Supercharged
Location: Brisbane Southside

Changing a Semi-Auto NC to Manual is it do able and worth it

Postby 16bit » Sat Jan 02, 2010 7:30 pm

insurance, engineering etc will cost the swap again. buy another one. sell it to a chick for more then the cost of the manual and be done with it.
98 evo gold - rotrexed and loving it.

This post has been printed using recycled pixels

Mr Morlock
Speed Racer
Posts: 6444
Joined: Mon Feb 04, 2008 11:40 am
Vehicle: NB8B
Location: Melbourne

Changing a Semi-Auto NC to Manual is it do able and worth it

Postby Mr Morlock » Sun Jan 03, 2010 2:52 pm

Everyone seems of the one mind- not a good idea. If you want to sell my guess is that it will sell very quickly - many like a sporty auto esp on increasingly busy suburban roads.

User avatar
Benny
Speed Racer
Posts: 2607
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NB SP
Location: Gorgeous Sydney
Contact:

Changing a Semi-Auto NC to Manual is it do able and worth it

Postby Benny » Wed Jan 13, 2010 11:40 am

There are NO semi-auto MX-5's.
Only automatic ones, or manual ones.

Changing an auto to a manual is more difficult than meets the eye.
You'll need the manual pedal box, and the master cylinder mounted on the firewall for the clutch.
Then, you'll need at least one new computer as the ones for autos are different than manuals, then buy a manual box and sell your auto box to help pay for it.
Not sure about the driveshaft connections etc, but you may need another drive shaft as the auto ones may be a bit shorter than the manual ones.
And then there is the gear indicator on the dash, which would be a dead give-away when you come to sell.

IMHO, it will probably cost you around $5K to do the conversion, and then you end with a butchered car with a reduced value down the track when you want to sell it.

Personally, if I was in your position, I'd either trade it for a manual, or just live with the current auto.
The auto is a great box and is still a lot of fun to drive, and as you say, a lot better to use in heavy traffic.
Image
ALWAYS RUNNING, SP with Bilstein Coil Overs and Doof Doof sound. Member of the Fat Bastards Racing Team

robdxr6

Changing a Semi-Auto NC to Manual is it do able and worth it

Postby robdxr6 » Thu May 27, 2010 9:56 pm

Hi I have a 2007 silver manual & i could be interested in an auto Rob


Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 133 guests