NA6: How did you wire your aircon for Adaptronic

[nismo502]

For those of you who did your own harness, how did you wire the aircon?
I am getting very weird problem whereby my aircon does not work for Fanspeed 2,3,4. Is it programming or wiring?
Thanks

[c2888]

http://www.miataturbo.net/forum/t20954/

How to make your AC work again without the factory ecu, it's instructions for a megasquirt but the diagrams and ideas still apply.

Basically the ecu decides when you should get AC and completes the circuit when those conditions are met, I think it just drops AC out when you put your foot down and hit that last contact in the crude early style TPS or over a certain crank speed.

You could be nasty and chuck a scotchlock between the two wires if you don't care about spinning the compressor too fast.

[StanTheMan]

I have the wiring loom from adaptronic. Mine does the same.
I think its in programming.

I noticed some Americans have a completely different setting......which I can't seem to get on auxiliary 7 & 8.
mine is set on auxiliary 3.