15x7 with offset -12

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

Post Reply
cosmo
Fast Driver
Posts: 128
Joined: Mon Sep 06, 2004 5:19 pm
Vehicle: NA6
Location: Melbourne

15x7 with offset -12

Postby cosmo » Fri Nov 06, 2009 11:47 am

Would these fit an NA...? (tires 205/50/15)
2007 Megane F1 R26. 1992 NA6. 1993 205 GTI series 3.
Top
RG.net
Racing Driver
Posts: 1692
Joined: Thu Apr 06, 2006 7:48 pm
Vehicle: NA6
Location: Sydney
Contact:
Contact RG.net

15x7 with offset -12

Postby RG.net » Fri Nov 06, 2009 11:50 am

Not with those Tyres.

Even with stretched tyres you would have too much poke and need to be slammed for the wheels to look any good on the car.
http://Run-It-Hard.com - We're here to have fun!
Top
User avatar
broady
Racing Driver
Posts: 1243
Joined: Fri Jan 19, 2007 12:32 am
Vehicle: NA8
Location: Sydney NSW

15x7 with offset -12

Postby broady » Fri Nov 06, 2009 11:54 am

You'd probably want flares.
Image
人馬一体 NA8
Tein SS, Torsen T2, BD, Maxim Works→RS*R, ARC, Koyo, SSR, Sparco, Flyin' Miata & bling!

6/5/2010
Top
cosmo
Fast Driver
Posts: 128
Joined: Mon Sep 06, 2004 5:19 pm
Vehicle: NA6
Location: Melbourne

15x7 with offset -12

Postby cosmo » Fri Nov 06, 2009 11:59 am

ok... the add says they fit RX2, RX3 & RX7 (thought the MX5 would be close...
2007 Megane F1 R26. 1992 NA6. 1993 205 GTI series 3.
Top
User avatar
Jeo
Speed Racer
Posts: 3648
Joined: Thu Jun 26, 2008 9:33 am
Vehicle: NB8B
Location: Canberra

15x7 with offset -12

Postby Jeo » Fri Nov 06, 2009 12:14 pm

RX2 and 3 aren't 4x100 either
Top
User avatar
green_comet
Car Detailing Guru
Posts: 1848
Joined: Tue May 24, 2005 1:41 am
Vehicle: NA8
Location: Melbourne

15x7 with offset -12

Postby green_comet » Fri Nov 06, 2009 1:04 pm

That size wheel would sit the same as 15x8 0et wheel. You can pull it off but you need to roll/pull guards, slam your car, and run a fair amount of camber. Those tyres would have to go for some 195/50's or thinner.
Top
User avatar
hks_kansei
Speed Racer
Posts: 6154
Joined: Tue Feb 03, 2009 10:43 am
Vehicle: NB8A
Location: Victoria

15x7 with offset -12

Postby hks_kansei » Fri Nov 06, 2009 1:32 pm

cosmo wrote:ok... the add says they fit RX2, RX3 & RX7 (thought the MX5 would be close...


RX2/3 PCD = 4X110
RX7 Series 1 PCD = 4x110 (possibly series 2 as well)

NA/NB MX5 PCD = 4x100
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)
Top
cosmo
Fast Driver
Posts: 128
Joined: Mon Sep 06, 2004 5:19 pm
Vehicle: NA6
Location: Melbourne

15x7 with offset -12

Postby cosmo » Fri Nov 06, 2009 1:46 pm

Thanks guys.....didn't want to slam car in any way, so might pass on them...
2007 Megane F1 R26. 1992 NA6. 1993 205 GTI series 3.
Top
User avatar
hks_kansei
Speed Racer
Posts: 6154
Joined: Tue Feb 03, 2009 10:43 am
Vehicle: NB8A
Location: Victoria

15x7 with offset -12

Postby hks_kansei » Fri Nov 06, 2009 3:15 pm

cosmo wrote:Thanks guys.....didn't want to slam car in any way, so might pass on them...


wont fit anyway, the wheel studs on the early RX series (RX2/3) are 10mm further apart than on an MX5.
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)
Top
Post Reply

Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 104 guests