Replacing the Bose Stereo on the NC
Moderators: timk, Stu, zombie, Andrew, -alex, miata
- IB1ZA
- Fast Driver
- Posts: 209
- Joined: Fri Feb 22, 2008 9:42 am
- Vehicle: NC
- Location: St Albans, Victoria AU
- Contact:
Replacing the Bose Stereo on the NC
Hi All,
I've finally got around to replacing the factory bose stereo on my NC.
The mistake which I made was ordering a Face Plate from mx5parts.co.uk. It cost me $100 AUD to supply and ship to Victoria Australia. It is a great face plate however it does not come with a trim, brackets, and is more designed for a single din unit instead of a double din.
There is a full face kit on eBay which is made by metra in the US. The kit comes with brackets, trims, is designed for double in and single din standards. You can find it here. http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0371793314
More info on this plate can be found at http://documents.victorytechnologies.co ... t/8587.pdf
It is only $70 AUD to supply and ship to Victoria Australia.
I kept my factory bose amp and speakers which sound much better on the Pioneer i brought. They sounded good on the bose also but sound better on the Pioneer. I also kept my steering wheel controls using some device but it wasn't PAC audio as my head unit doesn't have a wired remote input
I didn't go with a built in GPS unit. They are very nice to have built in GPS but no one supports GPS like TOM TOM!!!
Here are some photos. - No trim is fitted yet as i'm waiting for one to be shiped from the US.
http://www.chadstone.org/ibiza/images/05062009273.jpg
http://www.chadstone.org/ibiza/images/05062009274.jpg
I've finally got around to replacing the factory bose stereo on my NC.
The mistake which I made was ordering a Face Plate from mx5parts.co.uk. It cost me $100 AUD to supply and ship to Victoria Australia. It is a great face plate however it does not come with a trim, brackets, and is more designed for a single din unit instead of a double din.
There is a full face kit on eBay which is made by metra in the US. The kit comes with brackets, trims, is designed for double in and single din standards. You can find it here. http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0371793314
More info on this plate can be found at http://documents.victorytechnologies.co ... t/8587.pdf
It is only $70 AUD to supply and ship to Victoria Australia.
I kept my factory bose amp and speakers which sound much better on the Pioneer i brought. They sounded good on the bose also but sound better on the Pioneer. I also kept my steering wheel controls using some device but it wasn't PAC audio as my head unit doesn't have a wired remote input
I didn't go with a built in GPS unit. They are very nice to have built in GPS but no one supports GPS like TOM TOM!!!
Here are some photos. - No trim is fitted yet as i'm waiting for one to be shiped from the US.
http://www.chadstone.org/ibiza/images/05062009273.jpg
http://www.chadstone.org/ibiza/images/05062009274.jpg
http://www.highclass.net.au/
-
- Racing Driver
- Posts: 740
- Joined: Wed Mar 28, 2007 12:02 pm
- Vehicle: ND - 2 GT
- Location: Melbourne
Replacing the Bose Stereo on the NC
looks nice! although that is bright! like a huge double DIN neon light.
- IB1ZA
- Fast Driver
- Posts: 209
- Joined: Fri Feb 22, 2008 9:42 am
- Vehicle: NC
- Location: St Albans, Victoria AU
- Contact:
Replacing the Bose Stereo on the NC
stevesports wrote:looks nice! although that is bright! like a huge double DIN neon light.
hehehe, brightness is highly adjustable.
http://www.highclass.net.au/
-
- Fast Driver
- Posts: 140
- Joined: Mon Jul 21, 2008 12:14 am
- Vehicle: ND - 2
- Location: Sydney
- Contact:
Replacing the Bose Stereo on the NC
Just curious... but why didn't you get a GPS integrated unit, would of only cost a bit more and would have enabled you to lose the tomtom.
Just curious is all
Just curious is all
- IB1ZA
- Fast Driver
- Posts: 209
- Joined: Fri Feb 22, 2008 9:42 am
- Vehicle: NC
- Location: St Albans, Victoria AU
- Contact:
Replacing the Bose Stereo on the NC
Hehehe,
II got this unit at a good price and i've had a Pioeneer with built in GPS before and the support for it was sh*t. Go to the Pioneer website htey want $300 to update the maps for you.
No one makes GPS and supports GPS like TOM TOM!
ALSO all the double din GPS units i've seen don't have tilt screen and don't have 6 in stacker
II got this unit at a good price and i've had a Pioeneer with built in GPS before and the support for it was sh*t. Go to the Pioneer website htey want $300 to update the maps for you.
No one makes GPS and supports GPS like TOM TOM!
ALSO all the double din GPS units i've seen don't have tilt screen and don't have 6 in stacker
http://www.highclass.net.au/
-
- Fast Driver
- Posts: 140
- Joined: Mon Jul 21, 2008 12:14 am
- Vehicle: ND - 2
- Location: Sydney
- Contact:
Replacing the Bose Stereo on the NC
IB1ZA wrote:Hehehe,
II got this unit at a good price and i've had a Pioeneer with built in GPS before and the support for it was sh*t. Go to the Pioneer website htey want $300 to update the maps for you.
No one makes GPS and supports GPS like TOM TOM!
ALSO all the double din GPS units i've seen don't have tilt screen and don't have 6 in stacker
Coolies, Yeah Pioneer GPS software/mapping support does suck... Kenwoods one is better from my experience.
Regarding TOM TOM... I was a fan boy for a long long time.. Then iGo8 came out... this is how GPS navigation should be
-
- Speed Racer
- Posts: 6444
- Joined: Mon Feb 04, 2008 11:40 am
- Vehicle: NB8B
- Location: Melbourne
Replacing the Bose Stereo on the NC
an add on GPS will be a cheaper option and it is portable.Most of us only require a gps occassionally.A mate used a low priced Ton Tom in Italy recently - maps were cheap and it works a treat. Music is obviously very important for some folks - I prefer talk info and AM does the trick! Have fun Ibiza
- IB1ZA
- Fast Driver
- Posts: 209
- Joined: Fri Feb 22, 2008 9:42 am
- Vehicle: NC
- Location: St Albans, Victoria AU
- Contact:
Replacing the Bose Stereo on the NC
http://www.highclass.net.au/
- Schultzy
- Driver
- Posts: 89
- Joined: Tue Jan 09, 2007 8:14 pm
- Vehicle: NC
- Location: Brisbane
Re: Replacing the Bose Stereo on the NC
IBIZA
I'm looking at replacing the Bose deck also and have my heart set on the new Pioneer double din. What product did you use for converting the the ohm's (i think thats what its called :S) to the Bose level?
I'm looking at replacing the Bose deck also and have my heart set on the new Pioneer double din. What product did you use for converting the the ohm's (i think thats what its called :S) to the Bose level?
- IB1ZA
- Fast Driver
- Posts: 209
- Joined: Fri Feb 22, 2008 9:42 am
- Vehicle: NC
- Location: St Albans, Victoria AU
- Contact:
Re: Replacing the Bose Stereo on the NC
Didn't use any product, should be able to connect straight into the bose amp.
http://www.highclass.net.au/
- Schultzy
- Driver
- Posts: 89
- Joined: Tue Jan 09, 2007 8:14 pm
- Vehicle: NC
- Location: Brisbane
Re: Replacing the Bose Stereo on the NC
Maybe I'm confused
On the big forum, the guys were saying that the Bose is 2ohm not 4 ohm that normal stereos have. Apparantly there is some product that does this and the bloke at the local Autobarn said this too. Probably trying to get some extra coin out of me lol
On the big forum, the guys were saying that the Bose is 2ohm not 4 ohm that normal stereos have. Apparantly there is some product that does this and the bloke at the local Autobarn said this too. Probably trying to get some extra coin out of me lol
- Schultzy
- Driver
- Posts: 89
- Joined: Tue Jan 09, 2007 8:14 pm
- Vehicle: NC
- Location: Brisbane
Re: Replacing the Bose Stereo on the NC
A line converter, just had another read of miata.net forums
- IB1ZA
- Fast Driver
- Posts: 209
- Joined: Fri Feb 22, 2008 9:42 am
- Vehicle: NC
- Location: St Albans, Victoria AU
- Contact:
Re: Replacing the Bose Stereo on the NC
I don't think we used a line converter, not that I remember. I'm pretty sure we just plugged staight into the amp.
http://www.highclass.net.au/
- Schultzy
- Driver
- Posts: 89
- Joined: Tue Jan 09, 2007 8:14 pm
- Vehicle: NC
- Location: Brisbane
Re: Replacing the Bose Stereo on the NC
No worries, cheers for getting back to me
Hopefully mine will be as straight forward as yours was!
Schultzy
Hopefully mine will be as straight forward as yours was!
Schultzy
- IB1ZA
- Fast Driver
- Posts: 209
- Joined: Fri Feb 22, 2008 9:42 am
- Vehicle: NC
- Location: St Albans, Victoria AU
- Contact:
Re: Replacing the Bose Stereo on the NC
do you have a face kit already?
http://www.highclass.net.au/
Return to “MX5 Audio, Electronics & Lighting”
Who is online
Users browsing this forum: No registered users and 126 guests