NC 20BPP Time Attack / Track Car - Build Thread

Chat to do with your MX5/Miata/Eunos Garage Ride(s).

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

User avatar
Boags
Speed Racer
Posts: 3533
Joined: Thu Nov 10, 2005 6:25 pm
Vehicle: NB SP
Location: Brisvegas
Contact:

Renesis NC Track Car - In the Build - Updated 20 Sept 2009

Postby Boags » Mon Sep 21, 2009 12:32 pm

bruce wrote:
AJ wrote:I dunno Bruce, I think CF is frowned upon in motor sport, due to its tendency to shatter on impact :)


Oops. Good point AJ.


Well, there are 3 CF hardtops heading this way for racing... :lol:

Looking good, Danny. :twisted:
Spartan Motor Sport : http://www.SpartanMS.com.au

User avatar
16bit
Speed Racer
Posts: 2346
Joined: Wed Nov 29, 2006 1:51 pm
Vehicle: NB8A - Supercharged
Location: Brisbane Southside

Renesis NC Track Car - In the Build - Updated 20 Sept 2009

Postby 16bit » Mon Sep 21, 2009 1:04 pm

Put a kevlar layer in and you will be fine. All v8 supercar parts have to be made with a kevlar layer to prevent shattering I think.
98 evo gold - rotrexed and loving it.

This post has been printed using recycled pixels

User avatar
AJ
Speed Racer
Posts: 4349
Joined: Sun Oct 30, 2005 8:27 pm
Vehicle: NC
Location: Gold Coast

Renesis NC Track Car - In the Build - Updated 20 Sept 2009

Postby AJ » Mon Sep 21, 2009 2:03 pm

fair enough, why I prefaced my post with "I dunno"....... :) like everything else, there's always improvements made over time.

Kevlar hey??...............added advantage of being bulletproof :lol:
Image
Don't worry about what people think, they don't do it very often
XMX5 Rogues

User avatar
16bit
Speed Racer
Posts: 2346
Joined: Wed Nov 29, 2006 1:51 pm
Vehicle: NB8A - Supercharged
Location: Brisbane Southside

Renesis NC Track Car - In the Build - Updated 20 Sept 2009

Postby 16bit » Fri Sep 25, 2009 5:40 pm

hey with the hydraulic handbrake would that work on the road parked on a hill or is it a race only thing?
98 evo gold - rotrexed and loving it.

This post has been printed using recycled pixels

User avatar
hks_kansei
Speed Racer
Posts: 6154
Joined: Tue Feb 03, 2009 10:43 am
Vehicle: NB8A
Location: Victoria

Renesis NC Track Car - In the Build - Updated 20 Sept 2009

Postby hks_kansei » Fri Sep 25, 2009 5:46 pm

16bit wrote:hey with the hydraulic handbrake would that work on the road parked on a hill or is it a race only thing?


it would work for a time, from memory hydro handbrakes have a habit of creeping (ie: slowly releasing over time)

so while it will hold the car when you walk off, there's no guarantee that the car wont have rolled away when you get back.



however, since the hydro uses independant calipers, you may be able to have the hydro for track/skidpan, and still leave the cable handbrake to work off the other calipers.
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)

Moto
Fast Driver
Posts: 293
Joined: Wed Jun 18, 2008 11:02 am
Vehicle: ND - 2 GT
Location: Melbourne

Renesis NC Track Car - In the Build - Updated 20 Sept 2009

Postby Moto » Mon Oct 05, 2009 1:27 pm

Just leave the car in gear :wink:

User avatar
Old Dude
Racing Driver
Posts: 1166
Joined: Tue Apr 07, 2009 8:06 pm
Vehicle: NB8B
Location: Gold Coast

Renesis NC Track Car - In the Build - Updated 20 Sept 2009

Postby Old Dude » Mon Oct 05, 2009 1:44 pm

hks_kansei wrote:
16bit wrote:hey with the hydraulic handbrake would that work on the road parked on a hill or is it a race only thing?


it would work for a time, from memory hydro handbrakes have a habit of creeping (ie: slowly releasing over time)

so while it will hold the car when you walk off, there's no guarantee that the car wont have rolled away when you get back.



however, since the hydro uses independant calipers, you may be able to have the hydro for track/skidpan, and still leave the cable handbrake to work off the other calipers.


I had a Subaru AWD that had a haudralic handbrake that would do just that on a hill. It could sit there for 8 hours and then all of a sudden you would see it slowly creeping down the hill, and it was always left in gear.
cheers
Old Dude 8)
"Everybody dies......, but not everybody lives" ;-)

MX 5 2001 Grace Green
NB8B

User avatar
orx626
Forum sponsor
Posts: 1774
Joined: Thu Sep 23, 2004 8:26 am
Vehicle: NC - Rotary
Location: Brisbane - Northside
Contact:

Renesis NC Track Car - In the Build - Updated 20 Sept 2009

Postby orx626 » Mon Oct 12, 2009 10:47 pm

Alrighty then!!! Feast your eyes on this bit of kit!!! 8)

Yup, the supercharger has landed and what a superb bit of kit it is!!! :twisted:

Image

Image

Image

Image

Image

Image


The plan of attack from here is as follows:
(1) During this week the engine will be prepared to receive the supercharger kit
(2) This Saturday will see the supercharger bolted to the engine
(3) Assess what other items are required before the engine can be sent out for testing and tuning

So stay tuned for more regular updates....

Cheers,
Danny

User avatar
sliq
Speed Racer
Posts: 3414
Joined: Sat Jan 13, 2007 12:33 am
Vehicle: ND - 2 GT
Location: Sydney
Contact:

Renesis NC Track Car - In the Build - Updated 12 Oct 2009

Postby sliq » Mon Oct 12, 2009 11:20 pm

i'm excited :mrgreen: can't wait orx!
i can't brain today.. i have the dumb..

FMS01
Fast Driver
Posts: 151
Joined: Sun Mar 05, 2006 5:48 pm
Vehicle: ND - 2 GT
Location: Brisbane
Contact:

Renesis NC Track Car - In the Build - Updated 12 Oct 2009

Postby FMS01 » Tue Oct 13, 2009 3:48 am

At first glance I thought your supercharger was "Hymen Enhanced" :lol:

Cheers,
Julian

User avatar
Old Dude
Racing Driver
Posts: 1166
Joined: Tue Apr 07, 2009 8:06 pm
Vehicle: NB8B
Location: Gold Coast

Renesis NC Track Car - In the Build - Updated 12 Oct 2009

Postby Old Dude » Tue Oct 13, 2009 8:30 am

Very nice, looking good.
Cheers
Old Dude 8)
"Everybody dies......, but not everybody lives" ;-)

MX 5 2001 Grace Green
NB8B

User avatar
bruce
Speed Racer
Posts: 7707
Joined: Fri Apr 25, 2003 11:00 am
Vehicle: NA8 - Turbo
Location: Victoria
Contact:

Renesis NC Track Car - In the Build - Updated 12 Oct 2009

Postby bruce » Tue Oct 13, 2009 10:48 am

Looks so nice. Black is the new polished/chrome.

User avatar
taminga16
Speed Racer
Posts: 3617
Joined: Thu Aug 06, 2009 12:22 am
Vehicle: NC
Location: Central Victoria

Renesis NC Track Car - In the Build - Updated 12 Oct 2009

Postby taminga16 » Tue Oct 13, 2009 2:15 pm

Danny,
Thank-you for sharing your project with us. When I am in Brisbane next I will come over and wash it for you. :)

Regards.
Greg.
When you turn your car on, does it return the favour?

User avatar
16bit
Speed Racer
Posts: 2346
Joined: Wed Nov 29, 2006 1:51 pm
Vehicle: NB8A - Supercharged
Location: Brisbane Southside

Renesis NC Track Car - In the Build - Updated 12 Oct 2009

Postby 16bit » Tue Oct 13, 2009 3:03 pm

would this fit into a particular race category if you wanted to compete with it?
98 evo gold - rotrexed and loving it.

This post has been printed using recycled pixels

love5
Driver
Posts: 82
Joined: Fri Jun 20, 2008 10:09 am
Vehicle: ND - 2 GT
Location: Gold Coast

Renesis NC Track Car - In the Build - Updated 12 Oct 2009

Postby love5 » Tue Oct 13, 2009 3:27 pm

It's arrived!! 8)

Can't wait to hear it 'whining'......
Last edited by love5 on Fri Oct 16, 2009 9:31 am, edited 1 time in total.
Previous - SP | Previous - 10AE


Return to “MX5 Garage Chat”

Who is online

Users browsing this forum: No registered users and 2 guests