Rear wing

Body, Paint, Interior and Trim questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

andybris

Rear wing

Postby andybris » Wed Sep 02, 2009 11:14 pm

Hi,

my first post... i am trying to find this rear wing or close to it in Australia (see second pic).

any ideas?

also i have just bought my first MX5 NA and it is slammed to the ground and drives worst than a go-kart as far as the numbers on the shocks check out the rears are NA0128700 which from reading are standard for NA without ABS or sports pack, so it must be just the springs the idiot changed, (see first pic...) height from center of 16" wheel to arch is 12", i believe it should be around 14"? and I now have a very bad back lol

I am looking for front and rear standard height springs in Brisbane... any chance anyone can help?
You do not have the required permissions to view the files attached to this post.

NMX516
Speed Racer
Posts: 2057
Joined: Mon Jun 19, 2006 12:05 pm
Vehicle: NB SP
Location: Brisbane

Rear wing

Postby NMX516 » Wed Sep 02, 2009 11:25 pm

andybris wrote:I am looking for front and rear standard height springs in Brisbane... any chance anyone can help?


MX5plus at Stafford. Forum and 5 club sponsor, link at the bottom of this page.
Pain is temporary, quitting lasts forever.

93_Clubman
Speed Racer
Posts: 11857
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Rear wing

Postby 93_Clubman » Fri Sep 04, 2009 3:06 pm

That type of rear wing comes up for sale 2nd hand from time to time here.

NA8 Clubman was 340mm front & 345mm rear from wheel centre to wheel arch, & sat about 1cm lower than the standard NA8, due to the lower spring perch on Bilsteins. Would expect the NA6 was similar ride height to the standard NA8.

User avatar
irwin83r
Racing Driver
Posts: 1563
Joined: Wed Feb 25, 2004 8:32 pm
Vehicle: NB8A
Location: wollongong
Contact:

Rear wing

Postby irwin83r » Sat Sep 05, 2009 11:43 am

looks good at that hight to me :)

but if your unhappy with it then its your call to change. however if your going to why not go aftermarket? or an upgrade spring/shock package? they handle so much better with a good set of matched springs and shocks.


Return to “MX5 Body, Paint, Interior & Trim”

Who is online

Users browsing this forum: Google [Bot] and 264 guests