andybris wrote:I am looking for front and rear standard height springs in Brisbane... any chance anyone can help?
MX5plus at Stafford. Forum and 5 club sponsor, link at the bottom of this page.
Rear wing
Moderators: timk, Stu, -alex, miata, zombie, Andrew
-
NMX516
- Speed Racer
- Posts: 2057
- Joined: Mon Jun 19, 2006 12:05 pm
- Vehicle: NB SP
- Location: Brisbane
Rear wing
MX5plus at Stafford. Forum and 5 club sponsor, link at the bottom of this page.
Pain is temporary, quitting lasts forever.
-
93_Clubman
- Speed Racer
- Posts: 11983
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
Rear wing
That type of rear wing comes up for sale 2nd hand from time to time here.
NA8 Clubman was 340mm front & 345mm rear from wheel centre to wheel arch, & sat about 1cm lower than the standard NA8, due to the lower spring perch on Bilsteins. Would expect the NA6 was similar ride height to the standard NA8.
NA8 Clubman was 340mm front & 345mm rear from wheel centre to wheel arch, & sat about 1cm lower than the standard NA8, due to the lower spring perch on Bilsteins. Would expect the NA6 was similar ride height to the standard NA8.
-
irwin83r
- Racing Driver
- Posts: 1563
- Joined: Wed Feb 25, 2004 8:32 pm
- Vehicle: NB8A
- Location: wollongong
- Contact:
Rear wing
looks good at that hight to me 
but if your unhappy with it then its your call to change. however if your going to why not go aftermarket? or an upgrade spring/shock package? they handle so much better with a good set of matched springs and shocks.
but if your unhappy with it then its your call to change. however if your going to why not go aftermarket? or an upgrade spring/shock package? they handle so much better with a good set of matched springs and shocks.
Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: No registered users and 3 guests
