Wazman's NB8a

[NMX516]

As an FYI I believe another way to reduce pressure in the fuel system is to undo the fuel cap.

J

Sorry Juffa, not true. All that does is release the pressure build up in the tank when the fuel vapourises in hot weather.

Another way to reduce the fuel pressure in the lines is to start the car, then pull the fuel pump relay or fuse. The engine will suck down the last drop of fuel in the lines before it can suck no more

[wazman]

I'll cut and past some in the tech section then

The pump is quiet as........ can only hear it if your listening for it

[dorifta]

Hey dude it's djemz from ns. Just got myself an nb same colour as yours and before I complement u on your progress I'd just like to say your a jerk for buying the wheels I wanted!!!

My nb also wobbles a bit at a constant speed but I'm told this goes away after cage and/or hardtop? Looking forward to hearing your experience with it!

For the pod, do you have to run that breather return so everything runs smoothly or is it simply for EPA? In the 32 hose from catch can goes straight to the ground!

[wazman]

Hey man, I intend on making a catch can for the breather soon as...... atm its just swinging in the breeze

the roll bar seemed to help the with a more solid feel to the car......though i'm just about to go test it.......(its raining out )

[devolutio]

hey waz, yeah i found the feel of the car changed a lot after installing the brown davis roll bar. i noticed a bit more tightening with a strut brace but nothing like the roll bar. you should try a hard top - i'm always amazed with the difference in feel that provides in winter.

[dorifta]

devo can you post up some photos of a BD roll bar in an nb? I'd like to see how they compare to the mx5plus ones

[Jeo]

devo can you post up some photos of a BD roll bar in an nb? I'd like to see how they compare to the mx5plus ones

Have a search mate, there would be hundreds of photos of them on this forum.

[wazman]

If your wondering how i drilled the holes for the rear of the cage with the roof on........i used this handy tool


I got the bar powder coated satin black.



The final install was a little trickier than i imagined. I had to leave the seat belts out and fit the seat belt tower plastic's. I had to reach in behind them to get the nuts started on the bolts, then bolted the seat belt back in.

[wazman]

I wasn't real keen to have the adaptronic adaptor plug thingy just swinging around near the passengers feat all open like it is so i went to Jaycar and got a box for it.....Just a generic one....



Just hacked it up with a hack saw until the adaptor fitted in....

[Mokesta]

Must have needed a big one of these.....

[wazman]

What kind of retard would waste cash on something anyone can make + mines better for obvious reasons

[wun911]

whoa respect for work well done.... and nice pics

[dorifta]

I was given a pod filter by a friend.......so i bought a 90 degree silicon bend from supercheap ($40 on sale! wooo! ) Its a reducer bend....so its 2.5 inch at one end and 3 inch at the other......


I'm going to a winton fun day this sunday ($30 is cheap track time and its fun to go with a bunch of mates) so i'll let you all know how the coilovers performed when i get back.......

Hey man on the stock airbox... There is a plug that goes into the top part of the box... U can pull it out n looks like it's not meant to do anything at all.. What did u do with that thing as what is it?

And lol no I'm not talking about the afm

[NMX516]

^^ It's the air temp sensor.

[dorifta]

^^ It's the air temp sensor.

do we need it? im guessing it can just dangle close to the mouth of the pod?


edit: will this do?

http://cgi.ebay.com.au/NEW-SILICON-BEND ... 286.c0.m14