Prime -> 5 Coats of gloss enamel -> Gloss Overcoat?
I'm thinking of doing the same thing, but with the same Chaste white as outside =D
Dazza's Clubman
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
philz
- Wheel guru
- Posts: 1297
- Joined: Wed Jun 04, 2008 4:32 pm
- Vehicle: ND - 2 GT
- Location: Sydney
Dazza's Clubman
LOL nice, is that $2 spray cans? or more expensive VHT stuff?
-
d-mag
- Road Track Rally
- Posts: 529
- Joined: Fri Jun 27, 2008 9:34 am
- Vehicle: ND - Turbo
- Location: Melbourne
Dazza's Clubman
Hammer, I'll get some better photo's up when the car isn't so dirty. 
lol
Szemen, I didn't do a clear coat. I didn't want too much shine.
I also agonised over doing it in Chaste White or Black, in the end if I didn't like it I could always sand it back and paint it again.
This will sound strange Phil, but I didn't scrimp on the quality of the rattle can.
I can't remember the brand but they were about $18 each cost price.
lolSzemen, I didn't do a clear coat. I didn't want too much shine.
I also agonised over doing it in Chaste White or Black, in the end if I didn't like it I could always sand it back and paint it again.
This will sound strange Phil, but I didn't scrimp on the quality of the rattle can.
I can't remember the brand but they were about $18 each cost price.MX5 Wanted. SE or NC (forced induction preferred 
)
)-
lightyear
- Infinity & Beyond
- Posts: 2331
- Joined: Mon Jun 02, 2008 7:54 pm
- Vehicle: NA6 - Turbo
- Location: s.e. melbourne
Dazza's Clubman
I think you need a black bonnet now. Go see james and get a 2nd one to paint flat black and keep your white one for when you want the car nice and neat. Or just wait till someone starts making c.f bonnets. Cough.
NA8B - P.I 1:50.1 Wntn1:38.0 Sand1:27.6 Wntn S1:08 Bfrd1:06.9 Cldr1:08.5 Wak1:10.4
"SE" - P.I 1:43.8 Wntn1:32.9 Sand1:22.0 Bfrd1:05.3
"SE" - P.I 1:43.8 Wntn1:32.9 Sand1:22.0 Bfrd1:05.3
-
d-mag
- Road Track Rally
- Posts: 529
- Joined: Fri Jun 27, 2008 9:34 am
- Vehicle: ND - Turbo
- Location: Melbourne
Dazza's Clubman
Funny you mention that Dave, I was going to go see him about a bonnet and a boot to mount my new wing on. They too will cop the satin black treatment.
MX5 Wanted. SE or NC (forced induction preferred )
)-
zawrilla
- Fast Driver
- Posts: 210
- Joined: Wed Jan 09, 2008 3:22 pm
- Vehicle: ND - 2 GT
- Location: Sydney
Dazza's Clubman
Just read through this thread... awesome car Daz.
Love what you have done to this thing.
Love what you have done to this thing.
-
lightyear
- Infinity & Beyond
- Posts: 2331
- Joined: Mon Jun 02, 2008 7:54 pm
- Vehicle: NA6 - Turbo
- Location: s.e. melbourne
Dazza's Clubman
I have a pair of headlight covers you can have. As it looks a bit dicky without them black as well.
NA8B - P.I 1:50.1 Wntn1:38.0 Sand1:27.6 Wntn S1:08 Bfrd1:06.9 Cldr1:08.5 Wak1:10.4
"SE" - P.I 1:43.8 Wntn1:32.9 Sand1:22.0 Bfrd1:05.3
"SE" - P.I 1:43.8 Wntn1:32.9 Sand1:22.0 Bfrd1:05.3
-
Jeo
- Speed Racer
- Posts: 3648
- Joined: Thu Jun 26, 2008 9:33 am
- Vehicle: NB8B
- Location: Canberra
Dazza's Clubman
lightyear wrote:...headlight covers... As it looks a bit dicky without them black as well.
+1
-
d-mag
- Road Track Rally
- Posts: 529
- Joined: Fri Jun 27, 2008 9:34 am
- Vehicle: ND - Turbo
- Location: Melbourne
Dazza's Clubman
I picked up some more parts for the car this week in the form of a Garage Vary lip (cheers Boags ), some spacers and tow hooks from mania and a new bootlid to put the new race (or is that rice?) GT wing on.
), some spacers and tow hooks from mania and a new bootlid to put the new race (or is that rice?) GT wing on.MX5 Wanted. SE or NC (forced induction preferred )
)-
d-mag
- Road Track Rally
- Posts: 529
- Joined: Fri Jun 27, 2008 9:34 am
- Vehicle: ND - Turbo
- Location: Melbourne
-
Okibi
- Speed Racer
- Posts: 10898
- Joined: Thu Aug 21, 2003 11:00 am
- Vehicle: NB SE
- Location: Perth, Western Australia
- Contact:
Dazza's Clubman
Nice work 
If you had access to a car like this, would you take it back right away? Neither would I.
-
RG.net
- Racing Driver
- Posts: 1692
- Joined: Thu Apr 06, 2006 7:48 pm
- Vehicle: NA6
- Location: Sydney
- Contact:
Dazza's Clubman
not a fan of the wing, the APR wings would suit your car better i think.
Car is still looking good none the less.
Car is still looking good none the less.
http://Run-It-Hard.com - We're here to have fun!
-
Fatty
- Speed Racer
- Posts: 3175
- Joined: Fri Feb 03, 2006 10:39 am
- Vehicle: NA6
- Location: Melbourne
Dazza's Clubman
fooly sick maaaate!
-
d-mag
- Road Track Rally
- Posts: 529
- Joined: Fri Jun 27, 2008 9:34 am
- Vehicle: ND - Turbo
- Location: Melbourne
Dazza's Clubman
Yeah I like the APR ones Adz, the deck on the one I have is exactly the same but APR don't have wings with as much offset as I was after. Anyway, I'm not too fussed with the looks, it's solely for track day use so as long as it holds the rear of the car down while doing 230 at Phillip island I'll be stoked.
It's not just fooly sick James, it's Hetik as bro.
It's not just fooly sick James, it's Hetik as bro.
MX5 Wanted. SE or NC (forced induction preferred )
)-
Fatty
- Speed Racer
- Posts: 3175
- Joined: Fri Feb 03, 2006 10:39 am
- Vehicle: NA6
- Location: Melbourne
Dazza's Clubman
HEKTIK BRO!
you know it's rather funny, i'm looking at this photo thinking "Man that wing is hideous, and those mazdaspeed wheels don't look very good, and that vary lip looks a bit crap as well"
given that in the flesh i know the wheels and lip actually look really good, it'll be interesting to see what i think of the wing when i see it.... I'll probably LOVE it!!!!!!!
you know it's rather funny, i'm looking at this photo thinking "Man that wing is hideous, and those mazdaspeed wheels don't look very good, and that vary lip looks a bit crap as well"
given that in the flesh i know the wheels and lip actually look really good, it'll be interesting to see what i think of the wing when i see it.... I'll probably LOVE it!!!!!!!
Who is online
Users browsing this forum: No registered users and 111 guests
