Whiteline Strut Brace NA6

corners · Postby **corners** » Fri Jul 24, 2009 5:40 pm

Hi all

I currently have some no name strut brace, currently off the car as the engine got swapped.

When previously fitted it used to make contact with the PCV valve and bend it a little.
Just wondering if anyone can tell me if the whiteline braces do this?

Cheers
Jaron

StanTheMan · Postby **StanTheMan** » Fri Jul 24, 2009 5:47 pm

doesn't look like its anywhere near the PCV valve

corners · Postby **corners** » Fri Jul 24, 2009 5:51 pm

Cheers I was sent pics but couldnt see the PCV Valve!
The picture I was sent shows the brace facing the other way......

StanTheMan · Postby **StanTheMan** » Fri Jul 24, 2009 5:54 pm

you can also install the bacckets the other way around which would bring it closer to the PCV valve but I doubt it would actually touch it.

corners · Postby **corners** » Fri Jul 24, 2009 5:59 pm

StanTheMan wrote:you can also install the bacckets the other way around which would bring it closer to the PCV valve but I doubt it would actually touch it.

I think I will run with your way as I wouldnt mind reinstalling my Master Cylinder stopper.