Does anyone know what kind of relay is used for the indicators?
Ive located the relay but its too dark to see what it looks like. Is it like the conventional 2 or 3 pin relays or something completley different??
Cheers
Indicator Relay NB
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Indicator Relay NB
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
-
grazza
Indicator Relay NB
It is a 3-pin but the pins are close together, unlike the usual type of relay.
I just bought a LED-compatible flasher and had to carefully bend the pins inwards to fit the factory plug. Then put a zip tie around the lot and it will not unplug itself now.
I just bought a LED-compatible flasher and had to carefully bend the pins inwards to fit the factory plug. Then put a zip tie around the lot and it will not unplug itself now.
-
Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Indicator Relay NB
sweet no worries..
i have already installed my rear LED tail lights/ indicators. i built a resistor into each of the rear indicators..so no need for a modified flasher unit yet
i have already installed my rear LED tail lights/ indicators. i built a resistor into each of the rear indicators..so no need for a modified flasher unit yet
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
Return to “MX5 Audio, Electronics & Lighting”
Who is online
Users browsing this forum: No registered users and 222 guests
