NC Sway Bars

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

Sailor
Racing Driver
Posts: 1064
Joined: Wed Jun 24, 2009 5:49 pm
Vehicle: NC
Location: Southie...NOT from " the Shire " :/.

NC Sway Bars

Postby Sailor » Thu Jul 16, 2009 3:32 pm

Any preferences for sway bars on an NC?
Looking at Whiteline 24mm Front and 16mm Rear, both adjustable.
Suspension is otherwise stock, car is a daily drive with a few track days for a start.
Any other ideas from NC drivers?

Cheers,
Rob
Rob


05 NCLE, Cosworth SC,PF01,Ohlins,Selby,GWR exh
"We're only given a tiny spark of madness.We mustn't lose it"(Robin Williams)

User avatar
Charlie Brown
Speed Racer
Posts: 2623
Joined: Mon Apr 28, 2003 11:00 am
Vehicle: NC
Location: Sydney, Just out of Dragon Territory over the bridge in the "Shire"
Contact:

NC Sway Bars

Postby Charlie Brown » Thu Jul 16, 2009 3:40 pm

Most are using the Whitelines.
Kuntry Kussin is using these http://www.mx5parts.co.uk/product_info. ... ts_id/1108
They are alloy and will cost you about the same as the Whitelines. He reports they are good for the road. He doesn't track his car, just blows up the motor. :oops:
Image

Wakefield 1:09.13 Eastern Creek GP 1:50.198 Ext 2:17.538 Sth 1:02.9003
Phillip Is 1:58.50 Winton Short 1:10.7 Lakeside 1:05.7711 MDTC 45.20

Sailor
Racing Driver
Posts: 1064
Joined: Wed Jun 24, 2009 5:49 pm
Vehicle: NC
Location: Southie...NOT from " the Shire " :/.

NC Sway Bars

Postby Sailor » Thu Jul 16, 2009 5:43 pm

OK, Done, ordered this afternoon.
Rob


05 NCLE, Cosworth SC,PF01,Ohlins,Selby,GWR exh
"We're only given a tiny spark of madness.We mustn't lose it"(Robin Williams)

User avatar
JBT
Speed Racer
Posts: 7946
Joined: Tue Jun 03, 2003 11:00 am
Vehicle: NC
Location: Brisbane

NC Sway Bars

Postby JBT » Thu Jul 16, 2009 7:00 pm

Sailor wrote:...Looking at Whiteline.....

Just what I'll be after once I sell my track wheels & tyres. :roll:
Image

Sailor
Racing Driver
Posts: 1064
Joined: Wed Jun 24, 2009 5:49 pm
Vehicle: NC
Location: Southie...NOT from " the Shire " :/.

NC Sway Bars

Postby Sailor » Tue Jul 28, 2009 4:13 pm

OK,
Contacted a long time mate and suspension genius who is the Pedders agent at Taren Point.
He fitted a set of Pedders adjustable bars front and rear, 3 hole adjustment on each.
Bars are bent by the legendary Don Selby for this agent, and after a 'proper' wheel alignment, have transformed my car into a big sprintkart.

Ride is just a little more solid, but my wife hasn't noticed despite my prompting.
Turnin and change of direction are just astounding compared to the std setup.
Really hard change of direction sees the rear bump and bounce just a little too much for my liking so next suspension mod will now be a set of adjustable rear shocks to replace the too soft Bilsteins fitted to the Limited Edition. Front seems OK atm.

Bars are set on the middle hole front/rear and when pushing hard, I get very very mild initial understeer, and I'll leave it like that until I get a decent drive in the wet....don't think the missus would appreciate swapping ends on her way to work if I tighten up the rear before a little more testing

Alignment on my std height NC LE came in at F/R camber -1.5, Caster, 6.2, Front toe in 1mm, rear toe in 1.5mm.
Absolutely no sign of tramlining so I might try just a tad less toe on the front and see what eventuates.

All in, I'm a very happy camper!
Rob


05 NCLE, Cosworth SC,PF01,Ohlins,Selby,GWR exh
"We're only given a tiny spark of madness.We mustn't lose it"(Robin Williams)

User avatar
AJ
Speed Racer
Posts: 4349
Joined: Sun Oct 30, 2005 8:27 pm
Vehicle: NC
Location: Gold Coast

NC Sway Bars

Postby AJ » Tue Jul 28, 2009 4:57 pm

:? <speechless> :?
Image
Don't worry about what people think, they don't do it very often
XMX5 Rogues

User avatar
CoffeeBoss
suntory
Posts: 1081
Joined: Sun Aug 01, 2004 10:58 pm
Vehicle: NC
Location: Sydney / Sth Highlands
Contact:

NC Sway Bars

Postby CoffeeBoss » Wed Jul 29, 2009 1:54 pm

Top review sailor, full marks!

Sailor
Racing Driver
Posts: 1064
Joined: Wed Jun 24, 2009 5:49 pm
Vehicle: NC
Location: Southie...NOT from " the Shire " :/.

NC Sway Bars

Postby Sailor » Wed Jul 29, 2009 5:40 pm

Thanks Boss,
Thought it might fill in a few blanks for those of us with Std height NCs.
I'd really like to drop mine by 30mm or so, but if I did, I just wouldn't get into my driveway
Rob


05 NCLE, Cosworth SC,PF01,Ohlins,Selby,GWR exh
"We're only given a tiny spark of madness.We mustn't lose it"(Robin Williams)

Lab-ratt

NC Sway Bars

Postby Lab-ratt » Fri Aug 28, 2009 3:52 pm

I've got the Whiteline bars and run them both full hard and the NC is still fairly hard to unsettle. Wouldnt stress too much about cranking it up to full hard settings but let us know how you go?


Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 220 guests