Deep Dish Wheels

[Hammer]

Where can you get deep dish wheels in Australia? Wheels like Sportmax, Borbet, Brock etc.

I've done a lot of searching and all the results come from German and US sites. Does anyone know any local sellers or distributors?

[Jeo]

Sportmaxx are sold by Mania and JDM Yard
Superlites at Performance Wheels

[Duj]

Not in aust, Yahoo auctions japan.

Sexy dish....

USED 4x100 Work VS-KF 15x8 +15 & 15x8 +5 (no tires included)





Jizz in my pants

[AJ]

mmmmmmmmmm............nice bling wheels, good to see occasionally amongst the usual dank & boring black/blackish/black with a red circle that a lot of ppl favour these days

[Jeo]

ooo, forgot about Yahoo Japan...

linky

[Hammer]

I like these Brock B1. They come in 4x100 PCD in sizes 17x8s or 16x8.5s. Or if your game 16x9 or 17x10.




Unfortunately, these TSW Cadwells do not



as well as these TSW Indy 500, which comes in sizes from 17x8s to 20x10s.



This is when I'm envious on Americans. They have sooo much access to different after market products.

[bruce]

Don't forget it's cheap over there too...

[Tezzax5]

I kind of like the old school look..
Have a look for some BBs rgf 33's or better
vw forums is great place to go looking

[16bit]

if you can find someone who sells borbets in australia let me know i would be keen.

[RG.net]

Hammer, at the end of the day, the rule of thumb is ... the less offset, the more dish.

If you want deep dish, then you need to commit to getting a lower offset wheel and making them fit your car.

the cheapest dished wheels are without a doubt XXR/Sportmax, JDMyard stocks them, and now MX5 mania does too.

For concaved wheels, Superlites would be your best bet.

If your willing to fork out the dosh for Borbets, get a decent offset to get the maximum dish possible.

[Hammer]

Thanks guys.

I'd be happy with a +25 offset on a 8" wide wheel (16" or 17" not fussed). My preference is not to lip the guard. I was told on an 8" wide/+25 offset you shouldn't have to (will most likely need wheel alignment with more camber).

What arey your experience?

[Duj]

USED 4x100 Work Meister S1 15x8 +28 / 15x8.5 +20

super clean for used

and dope sizes for oem body

dont sleep on these folks

$1350US ($1736AUD) at your door via ems air with tracking!




[right][snapback]111743[/snapback][/right]

Someone bring these wheels to Aust!!! I would, but Im waiting for some different ones...

[RG.net]

Thanks guys.

I'd be happy with a +25 offset on a 8" wide wheel (16" or 17" not fussed). My preference is not to lip the guard. I was told on an 8" wide/+25 offset you shouldn't have to (will most likely need wheel alignment with more camber).

What arey your experience?

Lip to the guard is roughly +15 on NA's and +10ish in NB's.

AB7 is running in the 20's mark, you should have a chat to him.

All you would need to really do is roll your guards, if your running a meaty tyre, and a little bit of camber (which is needed really anyway).

[Hammer]

My bad, I meant roll the guards.

So it is roughly the same for not rolling the guard... "+15 on NA's and +10ish in NB's" on 8" width?

[Hammer]

USED 4x100 Work Meister S1 15x8 +28 / 15x8.5 +20

super clean for used

and dope sizes for oem body

dont sleep on these folks

$1350US ($1736AUD) at your door via ems air with tracking!

Someone bring these wheels to Aust!!! I would, but Im waiting for some different ones...

Duj where are you finding these? From Japan eBay/Yahoo etc?