Touch Up Paint (spray cans)

Body, Paint, Interior and Trim questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

User avatar
Regie
Speed Racer
Posts: 4259
Joined: Thu May 15, 2008 3:02 pm
Vehicle: NC - V8
Location: Sydney

Touch Up Paint (spray cans)

Postby Regie » Mon Jul 06, 2009 1:02 pm

My Mazdaspeed rear pods should be here sometime this week. Only problem is they are Titanium grey and my car is Sunlight Silver.

Does anyone have any recomended places to go to get paint matched and put into a spray can. I got some for my previous car from a place just round the corner from me, but they have since closed down)

preferable somewhere in the southen suburbs of Sydney

Thanks in advance
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more

User avatar
Benny
Speed Racer
Posts: 2607
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NB SP
Location: Gorgeous Sydney
Contact:

Touch Up Paint (spray cans)

Postby Benny » Mon Jul 06, 2009 3:07 pm

I can't remember their name, but there is such a place in Sydneham Rd Marrickville if that wil help you.
Image
ALWAYS RUNNING, SP with Bilstein Coil Overs and Doof Doof sound. Member of the Fat Bastards Racing Team

Mr Morlock
Speed Racer
Posts: 6444
Joined: Mon Feb 04, 2008 11:40 am
Vehicle: NB8B
Location: Melbourne

Touch Up Paint (spray cans)

Postby Mr Morlock » Mon Jul 06, 2009 5:57 pm

- you will need some clear as well. Phone book should give you automotive paint suppliers or check one of your local automotive business people for a lead.

User avatar
hks_kansei
Speed Racer
Posts: 6154
Joined: Tue Feb 03, 2009 10:43 am
Vehicle: NB8A
Location: Victoria

Touch Up Paint (spray cans)

Postby hks_kansei » Mon Jul 06, 2009 6:01 pm

just go to normal car shops (autobarn, supercheap etc)

you can usually get the aerosol cans pre-done for about $12max, since your car is still factory colour, and since Sunlight silver was used on other Mazda models, it should be on teh shelf.

I have used Duplicolour brand in the past and it's been pretty good.
just remember to sit the can (the can part, dont wet the nossle) in some hot (not too hot, you should still be able to put your hands in there) water before you spray, it helps increase the can pressure a bit and thins the paint so it sprays more evenly.

or jsut go to a panel shop and get it sprayed properly and ti will look heaps better!
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)

User avatar
Regie
Speed Racer
Posts: 4259
Joined: Thu May 15, 2008 3:02 pm
Vehicle: NC - V8
Location: Sydney

Touch Up Paint (spray cans)

Postby Regie » Mon Jul 06, 2009 7:53 pm

hks_kansei wrote:just go to normal car shops (autobarn, supercheap etc)

you can usually get the aerosol cans pre-done for about $12max, since your car is still factory colour, and since Sunlight silver was used on other Mazda models, it should be on teh shelf.

I have used Duplicolour brand in the past and it's been pretty good.
just remember to sit the can (the can part, dont wet the nossle) in some hot (not too hot, you should still be able to put your hands in there) water before you spray, it helps increase the can pressure a bit and thins the paint so it sprays more evenly.

or jsut go to a panel shop and get it sprayed properly and ti will look heaps better!


yeah ive had a look at the car shops and they dont have Sunlight Silver (which i thought they would). Thats cool, i was just seeing if anyone knew of any people that mixed up paint to put in a spraycan...
ill just look on the net for a place that is close to mine.
I could get them sprayed professionally, but they are only a small part of the body..if it was another part of the car i wouldnt hesitate to get it done professionally
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more

User avatar
AB7
Racing Driver
Posts: 637
Joined: Thu Jun 07, 2007 2:42 pm
Vehicle: ND - 2 GT
Location: Melbourne

Touch Up Paint (spray cans)

Postby AB7 » Mon Jul 06, 2009 9:08 pm

I went to automotive paint supplier, they can make it to any colour you want. The code for sunlight silver is 22v. It's $30 per can, you need to get the clear as well.

User avatar
16bit
Speed Racer
Posts: 2346
Joined: Wed Nov 29, 2006 1:51 pm
Vehicle: NB8A - Supercharged
Location: Brisbane Southside

Touch Up Paint (spray cans)

Postby 16bit » Tue Jul 07, 2009 9:40 am

this is all very interesting. does anyone have any photos of their work with these made to order rattle cans? I might give it a go on a few panels that have some scratches etc.
98 evo gold - rotrexed and loving it.

This post has been printed using recycled pixels

User avatar
16bit
Speed Racer
Posts: 2346
Joined: Wed Nov 29, 2006 1:51 pm
Vehicle: NB8A - Supercharged
Location: Brisbane Southside

Touch Up Paint (spray cans)

Postby 16bit » Tue Jul 07, 2009 9:42 am

btw here is a link to the colours

http://www.miata.net/gallery/concepts.html#colors
98 evo gold - rotrexed and loving it.

This post has been printed using recycled pixels

trader
Racing Driver
Posts: 797
Joined: Fri Oct 10, 2003 10:41 am
Vehicle: NB SE
Location: canberra

Touch Up Paint (spray cans)

Postby trader » Tue Jul 07, 2009 12:07 pm

I used to get the sunburst made up in cans until my source stopped making them. They were'nt that successful as towards the end of the can you always seemed to get paint splatter. Now use the prevail kit from Bunnings. You still have to get a tin of paint mixed from a paint shop and only thin out what you need. I find it a good option but my paint is not irredescent.
NB SE, NA 1.8.

Mr Morlock
Speed Racer
Posts: 6444
Joined: Mon Feb 04, 2008 11:40 am
Vehicle: NB8B
Location: Melbourne

Touch Up Paint (spray cans)

Postby Mr Morlock » Tue Jul 07, 2009 8:11 pm

My local small business auto paint supplier mixes in a spray can whilst you wait. They use standard cans and tint as required- I waited about 5 mins and the cost was less than $20. All I had to paint was a petrol cap lid and getting it done professionally was not a consideration as far as cost is concerned.Incidentally the car was an imported small Ford and the spare parts at the dealer did not include paint- they pointed me to the local small business who I already knew.I did have some probs with sputtering but this may have been technique but just let it dry and rub it down if it is not to your liking. Some people do a terrific job with spray cans.

davidsgiles

Touch Up Paint (spray cans)

Postby davidsgiles » Wed Jul 08, 2009 2:17 pm

I have used these guys in Croydon (Sydney) a few times for resprays and repairing scratches but they also sell the kits to DIY. http://www.touchuppaint.com.au/ Very cheap and the quality is fantastic.

User avatar
Regie
Speed Racer
Posts: 4259
Joined: Thu May 15, 2008 3:02 pm
Vehicle: NC - V8
Location: Sydney

Touch Up Paint (spray cans)

Postby Regie » Wed Jul 08, 2009 5:34 pm

davidsgiles wrote:I have used these guys in Croydon (Sydney) a few times for resprays and repairing scratches but they also sell the kits to DIY. http://www.touchuppaint.com.au/ Very cheap and the quality is fantastic.


Cheers, my pods turned up today, i shall go and see them on Friday for some paint :)
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more

User avatar
16bit
Speed Racer
Posts: 2346
Joined: Wed Nov 29, 2006 1:51 pm
Vehicle: NB8A - Supercharged
Location: Brisbane Southside

Touch Up Paint (spray cans)

Postby 16bit » Wed Jul 08, 2009 5:55 pm

pics after please :)
98 evo gold - rotrexed and loving it.

This post has been printed using recycled pixels

User avatar
Regie
Speed Racer
Posts: 4259
Joined: Thu May 15, 2008 3:02 pm
Vehicle: NC - V8
Location: Sydney

Touch Up Paint (spray cans)

Postby Regie » Wed Jul 08, 2009 7:23 pm

16bit wrote:pics after please :)


there are some pics in my garage section just taped up..i rekon they will look schweet!
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more


Return to “MX5 Body, Paint, Interior & Trim”

Who is online

Users browsing this forum: No registered users and 265 guests