My Mazdaspeed rear pods should be here sometime this week. Only problem is they are Titanium grey and my car is Sunlight Silver.
Does anyone have any recomended places to go to get paint matched and put into a spray can. I got some for my previous car from a place just round the corner from me, but they have since closed down)
preferable somewhere in the southen suburbs of Sydney
Thanks in advance
Touch Up Paint (spray cans)
Moderators: timk, Stu, zombie, Andrew, -alex, miata
- Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Touch Up Paint (spray cans)
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
- Benny
- Speed Racer
- Posts: 2607
- Joined: Wed Apr 23, 2003 11:00 am
- Vehicle: NB SP
- Location: Gorgeous Sydney
- Contact:
Touch Up Paint (spray cans)
I can't remember their name, but there is such a place in Sydneham Rd Marrickville if that wil help you.
ALWAYS RUNNING, SP with Bilstein Coil Overs and Doof Doof sound. Member of the Fat Bastards Racing Team
-
- Speed Racer
- Posts: 6444
- Joined: Mon Feb 04, 2008 11:40 am
- Vehicle: NB8B
- Location: Melbourne
Touch Up Paint (spray cans)
- you will need some clear as well. Phone book should give you automotive paint suppliers or check one of your local automotive business people for a lead.
- hks_kansei
- Speed Racer
- Posts: 6154
- Joined: Tue Feb 03, 2009 10:43 am
- Vehicle: NB8A
- Location: Victoria
Touch Up Paint (spray cans)
just go to normal car shops (autobarn, supercheap etc)
you can usually get the aerosol cans pre-done for about $12max, since your car is still factory colour, and since Sunlight silver was used on other Mazda models, it should be on teh shelf.
I have used Duplicolour brand in the past and it's been pretty good.
just remember to sit the can (the can part, dont wet the nossle) in some hot (not too hot, you should still be able to put your hands in there) water before you spray, it helps increase the can pressure a bit and thins the paint so it sprays more evenly.
or jsut go to a panel shop and get it sprayed properly and ti will look heaps better!
you can usually get the aerosol cans pre-done for about $12max, since your car is still factory colour, and since Sunlight silver was used on other Mazda models, it should be on teh shelf.
I have used Duplicolour brand in the past and it's been pretty good.
just remember to sit the can (the can part, dont wet the nossle) in some hot (not too hot, you should still be able to put your hands in there) water before you spray, it helps increase the can pressure a bit and thins the paint so it sprays more evenly.
or jsut go to a panel shop and get it sprayed properly and ti will look heaps better!
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)
- Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Touch Up Paint (spray cans)
hks_kansei wrote:just go to normal car shops (autobarn, supercheap etc)
you can usually get the aerosol cans pre-done for about $12max, since your car is still factory colour, and since Sunlight silver was used on other Mazda models, it should be on teh shelf.
I have used Duplicolour brand in the past and it's been pretty good.
just remember to sit the can (the can part, dont wet the nossle) in some hot (not too hot, you should still be able to put your hands in there) water before you spray, it helps increase the can pressure a bit and thins the paint so it sprays more evenly.
or jsut go to a panel shop and get it sprayed properly and ti will look heaps better!
yeah ive had a look at the car shops and they dont have Sunlight Silver (which i thought they would). Thats cool, i was just seeing if anyone knew of any people that mixed up paint to put in a spraycan...
ill just look on the net for a place that is close to mine.
I could get them sprayed professionally, but they are only a small part of the body..if it was another part of the car i wouldnt hesitate to get it done professionally
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
- AB7
- Racing Driver
- Posts: 637
- Joined: Thu Jun 07, 2007 2:42 pm
- Vehicle: ND - 2 GT
- Location: Melbourne
Touch Up Paint (spray cans)
I went to automotive paint supplier, they can make it to any colour you want. The code for sunlight silver is 22v. It's $30 per can, you need to get the clear as well.
- 16bit
- Speed Racer
- Posts: 2346
- Joined: Wed Nov 29, 2006 1:51 pm
- Vehicle: NB8A - Supercharged
- Location: Brisbane Southside
Touch Up Paint (spray cans)
this is all very interesting. does anyone have any photos of their work with these made to order rattle cans? I might give it a go on a few panels that have some scratches etc.
98 evo gold - rotrexed and loving it.
This post has been printed using recycled pixels
This post has been printed using recycled pixels
- 16bit
- Speed Racer
- Posts: 2346
- Joined: Wed Nov 29, 2006 1:51 pm
- Vehicle: NB8A - Supercharged
- Location: Brisbane Southside
Touch Up Paint (spray cans)
98 evo gold - rotrexed and loving it.
This post has been printed using recycled pixels
This post has been printed using recycled pixels
-
- Racing Driver
- Posts: 797
- Joined: Fri Oct 10, 2003 10:41 am
- Vehicle: NB SE
- Location: canberra
Touch Up Paint (spray cans)
I used to get the sunburst made up in cans until my source stopped making them. They were'nt that successful as towards the end of the can you always seemed to get paint splatter. Now use the prevail kit from Bunnings. You still have to get a tin of paint mixed from a paint shop and only thin out what you need. I find it a good option but my paint is not irredescent.
NB SE, NA 1.8.
-
- Speed Racer
- Posts: 6444
- Joined: Mon Feb 04, 2008 11:40 am
- Vehicle: NB8B
- Location: Melbourne
Touch Up Paint (spray cans)
My local small business auto paint supplier mixes in a spray can whilst you wait. They use standard cans and tint as required- I waited about 5 mins and the cost was less than $20. All I had to paint was a petrol cap lid and getting it done professionally was not a consideration as far as cost is concerned.Incidentally the car was an imported small Ford and the spare parts at the dealer did not include paint- they pointed me to the local small business who I already knew.I did have some probs with sputtering but this may have been technique but just let it dry and rub it down if it is not to your liking. Some people do a terrific job with spray cans.
Touch Up Paint (spray cans)
I have used these guys in Croydon (Sydney) a few times for resprays and repairing scratches but they also sell the kits to DIY. http://www.touchuppaint.com.au/ Very cheap and the quality is fantastic.
- Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Touch Up Paint (spray cans)
davidsgiles wrote:I have used these guys in Croydon (Sydney) a few times for resprays and repairing scratches but they also sell the kits to DIY. http://www.touchuppaint.com.au/ Very cheap and the quality is fantastic.
Cheers, my pods turned up today, i shall go and see them on Friday for some paint
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
- 16bit
- Speed Racer
- Posts: 2346
- Joined: Wed Nov 29, 2006 1:51 pm
- Vehicle: NB8A - Supercharged
- Location: Brisbane Southside
Touch Up Paint (spray cans)
pics after please
98 evo gold - rotrexed and loving it.
This post has been printed using recycled pixels
This post has been printed using recycled pixels
- Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Touch Up Paint (spray cans)
16bit wrote:pics after please
there are some pics in my garage section just taped up..i rekon they will look schweet!
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: No registered users and 263 guests