interior removal guide

Body, Paint, Interior and Trim questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

User avatar
16bit
Speed Racer
Posts: 2346
Joined: Wed Nov 29, 2006 1:51 pm
Vehicle: NB8A - Supercharged
Location: Brisbane Southside

interior removal guide

Postby 16bit » Fri Jun 19, 2009 9:11 am

anyone know where I could get hold of a free internets interior removal guide for my nb8a?
98 evo gold - rotrexed and loving it.

This post has been printed using recycled pixels

User avatar
Hammer
Speed Racer
Posts: 2849
Joined: Fri Apr 25, 2003 11:00 am
Vehicle: NB SP
Location: Sydney
Contact:

interior removal guide

Postby Hammer » Fri Jun 19, 2009 12:30 pm

16bit wrote:anyone know where I could get hold of a free internets interior removal guide for my nb8a?


they miata.net
H@mmer - 1994 Clubman | 2002 SP
Image
GO TOPLESS!!!

User avatar
Okibi
Speed Racer
Posts: 10901
Joined: Thu Aug 21, 2003 11:00 am
Vehicle: NB SE
Location: Perth, Western Australia
Contact:

interior removal guide

Postby Okibi » Fri Jun 19, 2009 2:35 pm

I've pulled most of ours apart as some stage.

I don't think I have photos for most though :? , what did you need advice on removing?
If you had access to a car like this, would you take it back right away? Neither would I.

User avatar
16bit
Speed Racer
Posts: 2346
Joined: Wed Nov 29, 2006 1:51 pm
Vehicle: NB8A - Supercharged
Location: Brisbane Southside

interior removal guide

Postby 16bit » Fri Jun 19, 2009 4:51 pm

Centre console and everything at the front (dash etch). Doors are no worries.

thanks!
98 evo gold - rotrexed and loving it.

This post has been printed using recycled pixels

mitch_f1
Racing Driver
Posts: 858
Joined: Wed Jun 17, 2009 8:59 pm
Vehicle: NA6
Location: Sydney

interior removal guide

Postby mitch_f1 » Fri Jun 19, 2009 5:26 pm

on the same topic, anyone know the weight loss by taking out carpets, sound deadening, softtop?

RG.net
Racing Driver
Posts: 1692
Joined: Thu Apr 06, 2006 7:48 pm
Vehicle: NA6
Location: Sydney
Contact:

interior removal guide

Postby RG.net » Fri Jun 19, 2009 6:45 pm

same boat, just want the bottom carpet out.

I'll do some fishing around guys.
http://Run-It-Hard.com - We're here to have fun!

RG.net
Racing Driver
Posts: 1692
Joined: Thu Apr 06, 2006 7:48 pm
Vehicle: NA6
Location: Sydney
Contact:

interior removal guide

Postby RG.net » Fri Jun 19, 2009 6:49 pm

16bit wrote:Centre console and everything at the front (dash etch). Doors are no worries.

thanks!


Centre console is easy, there are two screws in the centre console (pop the lid, you will see them) and there is one screw attached to the bottom of the dash on each side (they will be covered with a black plastic dot thingy) then you carefully lift it out, try not to damage the boot and fuel opener.
http://Run-It-Hard.com - We're here to have fun!

User avatar
sliq
Speed Racer
Posts: 3414
Joined: Sat Jan 13, 2007 12:33 am
Vehicle: ND - 2 GT
Location: Sydney
Contact:

interior removal guide

Postby sliq » Fri Jun 19, 2009 6:49 pm

http://www.youtube.com/watch?v=4n_9Nd9bhco

not exactly for an mx5, but you get the gist of it.
i can't brain today.. i have the dumb..

RG.net
Racing Driver
Posts: 1692
Joined: Thu Apr 06, 2006 7:48 pm
Vehicle: NA6
Location: Sydney
Contact:

interior removal guide

Postby RG.net » Fri Jun 19, 2009 7:12 pm

http://www.miata.net/garage/DashRmv_89_93.pdf

that should help you with the dash removal 16bit.

Its for an NA, but its all very similar.
http://Run-It-Hard.com - We're here to have fun!

User avatar
16bit
Speed Racer
Posts: 2346
Joined: Wed Nov 29, 2006 1:51 pm
Vehicle: NB8A - Supercharged
Location: Brisbane Southside

interior removal guide

Postby 16bit » Fri Jun 19, 2009 7:45 pm

thanks mate, thats a big help. i am glad I did not just have a crack at it!
98 evo gold - rotrexed and loving it.

This post has been printed using recycled pixels

User avatar
de Bounce
Racing Driver
Posts: 1091
Joined: Thu Feb 12, 2009 5:19 pm
Vehicle: NC
Location: Northern Burbs - Melbourne

interior removal guide

Postby de Bounce » Fri Jun 19, 2009 7:48 pm

MXHEVN wrote:Centre console is easy, there are two screws in the centre console (pop the lid, you will see them) and there is one screw attached to the bottom of the dash on each side (they will be covered with a black plastic dot thingy) then you carefully lift it out, try not to damage the boot and fuel opener.

Thought there was a screw under the electric window switch :!: Link
At least there is in the NB8B :shock:
Getting the switch out is a PITA IMHO
2011 NC2 PRHT SE in Dolphin Grey
2001 NB8B in Crystal Blue - Sold :(
Motorkhana Video

User avatar
TieNN89
Speed Racer
Posts: 2012
Joined: Mon Nov 26, 2007 8:27 pm
Vehicle: NC
Location: Brisbane
Contact:

interior removal guide

Postby TieNN89 » Fri Jun 19, 2009 9:17 pm

de Bounce wrote:
MXHEVN wrote:Centre console is easy, there are two screws in the centre console (pop the lid, you will see them) and there is one screw attached to the bottom of the dash on each side (they will be covered with a black plastic dot thingy) then you carefully lift it out, try not to damage the boot and fuel opener.

Thought there was a screw under the electric window switch :!: Link
At least there is in the NB8B :shock:
Getting the switch out is a PITA IMHO


yep on the NB8B+ consoles

on the NB8A its under the ash cup thing open it up and hold the lid and pull it upwards should remove it (should be pretty easy)

RG.net
Racing Driver
Posts: 1692
Joined: Thu Apr 06, 2006 7:48 pm
Vehicle: NA6
Location: Sydney
Contact:

interior removal guide

Postby RG.net » Sat Jun 20, 2009 1:06 am

AZNTieN wrote:
de Bounce wrote:
MXHEVN wrote:Centre console is easy, there are two screws in the centre console (pop the lid, you will see them) and there is one screw attached to the bottom of the dash on each side (they will be covered with a black plastic dot thingy) then you carefully lift it out, try not to damage the boot and fuel opener.

Thought there was a screw under the electric window switch :!: Link
At least there is in the NB8B :shock:
Getting the switch out is a PITA IMHO


yep on the NB8B+ consoles

on the NB8A its under the ash cup thing open it up and hold the lid and pull it upwards should remove it (should be pretty easy)


I didnt have a screw there since purchase, lucky me.
http://Run-It-Hard.com - We're here to have fun!

User avatar
16bit
Speed Racer
Posts: 2346
Joined: Wed Nov 29, 2006 1:51 pm
Vehicle: NB8A - Supercharged
Location: Brisbane Southside

interior removal guide

Postby 16bit » Sat Jun 20, 2009 2:18 pm

failed at removing the dash! just could not get it loose. I got a bunch of other stuff out but I could not be bothered in the end.
98 evo gold - rotrexed and loving it.

This post has been printed using recycled pixels

RG.net
Racing Driver
Posts: 1692
Joined: Thu Apr 06, 2006 7:48 pm
Vehicle: NA6
Location: Sydney
Contact:

interior removal guide

Postby RG.net » Sat Jun 20, 2009 4:04 pm

16bit wrote:failed at removing the dash! just could not get it loose. I got a bunch of other stuff out but I could not be bothered in the end.


Why do you want the dash out anyways?

just strip the carpet, paint it and call it a day.
http://Run-It-Hard.com - We're here to have fun!


Return to “MX5 Body, Paint, Interior & Trim”

Who is online

Users browsing this forum: No registered users and 115 guests