Opinions on these wheels...
Moderators: timk, Stu, zombie, Andrew, -alex, miata
- CheyneX5
- Racing Driver
- Posts: 1776
- Joined: Sun May 18, 2008 8:38 pm
- Vehicle: NA6
- Location: Melbourne, Victoria, Australia
- Contact:
Opinions on these wheels...
Hi all,
I have just been offered these wheels for quite a good price, they come with crap rubber, they are 15x6.5, +38 offset and need some serious TLC.
I am going to paint them anyway, what do we all think, look dodgy or fine? Guy says they are good and no damage structuarly.
I have just been offered these wheels for quite a good price, they come with crap rubber, they are 15x6.5, +38 offset and need some serious TLC.
I am going to paint them anyway, what do we all think, look dodgy or fine? Guy says they are good and no damage structuarly.
90' NA6 - Classic Red
09' Skoda Octavia vRS TSi Wagon - Race Blue
09' Skoda Octavia vRS TSi Wagon - Race Blue
- IB1ZA
- Fast Driver
- Posts: 209
- Joined: Fri Feb 22, 2008 9:42 am
- Vehicle: NC
- Location: St Albans, Victoria AU
- Contact:
Opinions on these wheels...
CheyneX5 wrote:Hi all,
I have just been offered these wheels for quite a good price, they come with crap rubber, they are 15x6.5, +38 offset and need some serious TLC.
I am going to paint them anyway, what do we all think, look dodgy or fine? Guy says they are good and no damage structuarly.
I like them. With some new rubber and once being cleaned I think they will look good on your car Cheyne.
http://www.highclass.net.au/
- fattima
- Racing Driver
- Posts: 602
- Joined: Thu Aug 23, 2007 5:49 am
- Vehicle: ND - 2 GT
- Location: Melbourne
Opinions on these wheels...
My other half was looking over my shoulder and went "ooooh" (not in a good way) I agree. Not a fan of this style of mag, very 70's. I used to run similar style of mags on my rally car but that was only because they were cheap!
-
- Fast Driver
- Posts: 293
- Joined: Wed Jun 18, 2008 11:02 am
- Vehicle: ND - 2 GT
- Location: Melbourne
Opinions on these wheels...
Yeah I gota say I'm not a fan either, maybe worth it if you got them for $100 or something.
- Jeo
- Speed Racer
- Posts: 3648
- Joined: Thu Jun 26, 2008 9:33 am
- Vehicle: NB8B
- Location: Canberra
Opinions on these wheels...
Do it!
- philz
- Wheel guru
- Posts: 1297
- Joined: Wed Jun 04, 2008 4:32 pm
- Vehicle: ND - 2 GT
- Location: Sydney
Opinions on these wheels...
Do it, do no listen to the above two.
If you are getting them at a good price, buy em, probably the closest thing you will get to reverse mesh for price. unless you can get your hands on meshies then get those instead
So close...
Yumm do it.
If you are getting them at a good price, buy em, probably the closest thing you will get to reverse mesh for price. unless you can get your hands on meshies then get those instead
So close...
Yumm do it.
- CheyneX5
- Racing Driver
- Posts: 1776
- Joined: Sun May 18, 2008 8:38 pm
- Vehicle: NA6
- Location: Melbourne, Victoria, Australia
- Contact:
Opinions on these wheels...
IB1ZA wrote:I like them. With some new rubber and once being cleaned I think they will look good on your car Cheyne.
Thanks man, i think they will too
fattima wrote:My other half was looking over my shoulder and went "ooooh" (not in a good way) I agree. Not a fan of this style of mag, very 70's. I used to run similar style of mags on my rally car but that was only because they were cheap!
I can understand that, i think it's one of those things where you love it, or you dont. I really love the old school look. These wheels will be my daily's and the na6 wheels for track
Moto wrote:Yeah I gota say I'm not a fan either, maybe worth it if you got them for $100 or something.
$230 with the sh*t tyres
Jeo wrote:Do it!
I think i will, these are going to be a restoration job. The tyres will come off eventually, i will get them sandblasted then spray the centres silver and polish the lip.
philz wrote:Do it, do no listen to the above two.
If you are getting them at a good price, buy em, probably the closest thing you will get to reverse mesh for price. unless you can get your hands on meshies then get those instead
So close...
Yumm do it.
I was looking at the pair for sale here but thought trying to find the other pair to match would be too difficult. These will have to do for now
90' NA6 - Classic Red
09' Skoda Octavia vRS TSi Wagon - Race Blue
09' Skoda Octavia vRS TSi Wagon - Race Blue
-
- Racing Driver
- Posts: 1025
- Joined: Tue Nov 21, 2006 10:42 am
- Vehicle: ND - 2 GT
- Location: Brisbane
- CheyneX5
- Racing Driver
- Posts: 1776
- Joined: Sun May 18, 2008 8:38 pm
- Vehicle: NA6
- Location: Melbourne, Victoria, Australia
- Contact:
Opinions on these wheels...
They are mid, not light, not heavy.
90' NA6 - Classic Red
09' Skoda Octavia vRS TSi Wagon - Race Blue
09' Skoda Octavia vRS TSi Wagon - Race Blue
- Steampunk
- Speed Racer
- Posts: 4670
- Joined: Wed Oct 10, 2007 9:16 am
- Vehicle: NA6
- Location: Southside of Breeze-bane
Opinions on these wheels...
I won't state my opinion on these wheels specifically, but just give a lil' advice on buying 2nd hand wheels;
Unless they are really cheap, don't let price be the major deciding factor.
Long story short, I now have 3 spare sets of wheels which I am finding difficult to sell (bought them because they WERE cheap and had really good tyres on them).
Unless they are really cheap, don't let price be the major deciding factor.
Long story short, I now have 3 spare sets of wheels which I am finding difficult to sell (bought them because they WERE cheap and had really good tyres on them).
- GS
- Fast Driver
- Posts: 260
- Joined: Mon May 15, 2006 6:40 pm
- Vehicle: NA6
- Location: Sydney
Opinions on these wheels...
Id say do it. Its a cheap way of getting some 15's on your car, then you can save up and get the good stuff (6ULs??) further down the track.
MX5's, (and NA's in particular) are great as they can pull off most wheels. 3, 4, 5 spokes, mesh, retro, 90's, modern - they can all look good on 5's.
Style wise, id say these wheels are closer to the factory option 15in BBS's rather than the reverse meshs:
MX5's, (and NA's in particular) are great as they can pull off most wheels. 3, 4, 5 spokes, mesh, retro, 90's, modern - they can all look good on 5's.
Style wise, id say these wheels are closer to the factory option 15in BBS's rather than the reverse meshs:
1989 NA6
-
- Speed Racer
- Posts: 2114
- Joined: Tue Sep 11, 2007 12:13 pm
- Vehicle: ND - 2 GT
- Location: Melbourne
Opinions on these wheels...
Wun's definition of weight (rim alone in size 15").
wun-weight < 4.0 kg
lite-weight is 4.0-5.5 kg
mid-wieght is 5.5-7.0 kg
FFG-weight is 7.0-9.0 kg
wun-weight < 4.0 kg
lite-weight is 4.0-5.5 kg
mid-wieght is 5.5-7.0 kg
FFG-weight is 7.0-9.0 kg
every ounce counts
- hks_kansei
- Speed Racer
- Posts: 6154
- Joined: Tue Feb 03, 2009 10:43 am
- Vehicle: NB8A
- Location: Victoria
Opinions on these wheels...
they look nice Cheyne, it's actually difficult to imagine what they would look like, they are like the SSR reverse mesh centre, but with the high offset of the BBS option ones.
are you able to do a trial fit and take pics?
are you able to do a trial fit and take pics?
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)
- CheyneX5
- Racing Driver
- Posts: 1776
- Joined: Sun May 18, 2008 8:38 pm
- Vehicle: NA6
- Location: Melbourne, Victoria, Australia
- Contact:
Opinions on these wheels...
Well guys, I bought them. They definatly need painting though. Pics up tomorrow.
90' NA6 - Classic Red
09' Skoda Octavia vRS TSi Wagon - Race Blue
09' Skoda Octavia vRS TSi Wagon - Race Blue
- TieNN89
- Speed Racer
- Posts: 2012
- Joined: Mon Nov 26, 2007 8:27 pm
- Vehicle: NC
- Location: Brisbane
- Contact:
Opinions on these wheels...
wun911 wrote:Wun's definition of weight (rim alone in size 15").
wun-weight < 4.0 kg
lite-weight is 4.0-5.5 kg
mid-wieght is 5.5-7.0 kg
FFG-weight is 7.0-9.0 kg
you should run on 4 space savers
Return to “MX5 Wheels, Suspension, Brakes & Tyres”
Who is online
Users browsing this forum: No registered users and 401 guests