Opinions on these wheels...

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

User avatar
CheyneX5
Racing Driver
Posts: 1776
Joined: Sun May 18, 2008 8:38 pm
Vehicle: NA6
Location: Melbourne, Victoria, Australia
Contact:

Opinions on these wheels...

Postby CheyneX5 » Fri May 22, 2009 2:35 am

Hi all,

I have just been offered these wheels for quite a good price, they come with crap rubber, they are 15x6.5, +38 offset and need some serious TLC.

I am going to paint them anyway, what do we all think, look dodgy or fine? Guy says they are good and no damage structuarly.

Image
90' NA6 - Classic Red
09' Skoda Octavia vRS TSi Wagon - Race Blue

User avatar
IB1ZA
Fast Driver
Posts: 209
Joined: Fri Feb 22, 2008 9:42 am
Vehicle: NC
Location: St Albans, Victoria AU
Contact:

Opinions on these wheels...

Postby IB1ZA » Fri May 22, 2009 7:19 am

CheyneX5 wrote:Hi all,

I have just been offered these wheels for quite a good price, they come with crap rubber, they are 15x6.5, +38 offset and need some serious TLC.

I am going to paint them anyway, what do we all think, look dodgy or fine? Guy says they are good and no damage structuarly.

Image


I like them. With some new rubber and once being cleaned I think they will look good on your car Cheyne.
http://www.highclass.net.au/

User avatar
fattima
Racing Driver
Posts: 602
Joined: Thu Aug 23, 2007 5:49 am
Vehicle: ND - 2 GT
Location: Melbourne

Opinions on these wheels...

Postby fattima » Fri May 22, 2009 8:27 am

My other half was looking over my shoulder and went "ooooh" (not in a good way) I agree. Not a fan of this style of mag, very 70's. I used to run similar style of mags on my rally car but that was only because they were cheap!

Moto
Fast Driver
Posts: 293
Joined: Wed Jun 18, 2008 11:02 am
Vehicle: ND - 2 GT
Location: Melbourne

Opinions on these wheels...

Postby Moto » Fri May 22, 2009 10:30 am

Yeah I gota say I'm not a fan either, maybe worth it if you got them for $100 or something.

User avatar
Jeo
Speed Racer
Posts: 3648
Joined: Thu Jun 26, 2008 9:33 am
Vehicle: NB8B
Location: Canberra

Opinions on these wheels...

Postby Jeo » Fri May 22, 2009 10:31 am

Do it!

User avatar
philz
Wheel guru
Posts: 1297
Joined: Wed Jun 04, 2008 4:32 pm
Vehicle: ND - 2 GT
Location: Sydney

Opinions on these wheels...

Postby philz » Fri May 22, 2009 11:17 am

Do it, do no listen to the above two.

If you are getting them at a good price, buy em, probably the closest thing you will get to reverse mesh for price. unless you can get your hands on meshies then get those instead :P

So close...
Image

Yumm do it.

User avatar
CheyneX5
Racing Driver
Posts: 1776
Joined: Sun May 18, 2008 8:38 pm
Vehicle: NA6
Location: Melbourne, Victoria, Australia
Contact:

Opinions on these wheels...

Postby CheyneX5 » Fri May 22, 2009 12:40 pm

IB1ZA wrote:I like them. With some new rubber and once being cleaned I think they will look good on your car Cheyne.


Thanks man, i think they will too :wink:

fattima wrote:My other half was looking over my shoulder and went "ooooh" (not in a good way) I agree. Not a fan of this style of mag, very 70's. I used to run similar style of mags on my rally car but that was only because they were cheap!


I can understand that, i think it's one of those things where you love it, or you dont. I really love the old school look. These wheels will be my daily's and the na6 wheels for track :)

Moto wrote:Yeah I gota say I'm not a fan either, maybe worth it if you got them for $100 or something.


$230 with the sh*t tyres 8)

Jeo wrote:Do it!


I think i will, these are going to be a restoration job. The tyres will come off eventually, i will get them sandblasted then spray the centres silver and polish the lip.

philz wrote:Do it, do no listen to the above two.

If you are getting them at a good price, buy em, probably the closest thing you will get to reverse mesh for price. unless you can get your hands on meshies then get those instead :P

So close...
Image

Yumm do it.


I was looking at the pair for sale here but thought trying to find the other pair to match would be too difficult. These will have to do for now :D
90' NA6 - Classic Red
09' Skoda Octavia vRS TSi Wagon - Race Blue

GP
Racing Driver
Posts: 1025
Joined: Tue Nov 21, 2006 10:42 am
Vehicle: ND - 2 GT
Location: Brisbane

Opinions on these wheels...

Postby GP » Fri May 22, 2009 1:17 pm

Make sure they're not heavyweights.
Graham

User avatar
CheyneX5
Racing Driver
Posts: 1776
Joined: Sun May 18, 2008 8:38 pm
Vehicle: NA6
Location: Melbourne, Victoria, Australia
Contact:

Opinions on these wheels...

Postby CheyneX5 » Fri May 22, 2009 1:20 pm

They are mid, not light, not heavy.
90' NA6 - Classic Red
09' Skoda Octavia vRS TSi Wagon - Race Blue

User avatar
Steampunk
Speed Racer
Posts: 4670
Joined: Wed Oct 10, 2007 9:16 am
Vehicle: NA6
Location: Southside of Breeze-bane

Opinions on these wheels...

Postby Steampunk » Fri May 22, 2009 1:48 pm

I won't state my opinion on these wheels specifically, but just give a lil' advice on buying 2nd hand wheels;
Unless they are really cheap, don't let price be the major deciding factor.

Long story short, I now have 3 spare sets of wheels which I am finding difficult to sell (bought them because they WERE cheap and had really good tyres on them). :oops: :cry:
Image

User avatar
GS
Fast Driver
Posts: 260
Joined: Mon May 15, 2006 6:40 pm
Vehicle: NA6
Location: Sydney

Opinions on these wheels...

Postby GS » Fri May 22, 2009 1:52 pm

Id say do it. Its a cheap way of getting some 15's on your car, then you can save up and get the good stuff (6ULs??) further down the track.

MX5's, (and NA's in particular) are great as they can pull off most wheels. 3, 4, 5 spokes, mesh, retro, 90's, modern - they can all look good on 5's.

Style wise, id say these wheels are closer to the factory option 15in BBS's rather than the reverse meshs:

Image
Image
1989 NA6

wun911
Speed Racer
Posts: 2114
Joined: Tue Sep 11, 2007 12:13 pm
Vehicle: ND - 2 GT
Location: Melbourne

Opinions on these wheels...

Postby wun911 » Fri May 22, 2009 1:59 pm

Wun's definition of weight (rim alone in size 15").

wun-weight < 4.0 kg

lite-weight is 4.0-5.5 kg

mid-wieght is 5.5-7.0 kg

FFG-weight is 7.0-9.0 kg
every ounce counts

User avatar
hks_kansei
Speed Racer
Posts: 6154
Joined: Tue Feb 03, 2009 10:43 am
Vehicle: NB8A
Location: Victoria

Opinions on these wheels...

Postby hks_kansei » Fri May 22, 2009 11:29 pm

they look nice Cheyne, it's actually difficult to imagine what they would look like, they are like the SSR reverse mesh centre, but with the high offset of the BBS option ones.

are you able to do a trial fit and take pics?
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)

User avatar
CheyneX5
Racing Driver
Posts: 1776
Joined: Sun May 18, 2008 8:38 pm
Vehicle: NA6
Location: Melbourne, Victoria, Australia
Contact:

Opinions on these wheels...

Postby CheyneX5 » Sat May 23, 2009 1:03 am

Well guys, I bought them. They definatly need painting though. Pics up tomorrow.
90' NA6 - Classic Red
09' Skoda Octavia vRS TSi Wagon - Race Blue

User avatar
TieNN89
Speed Racer
Posts: 2012
Joined: Mon Nov 26, 2007 8:27 pm
Vehicle: NC
Location: Brisbane
Contact:

Opinions on these wheels...

Postby TieNN89 » Sat May 23, 2009 1:29 am

wun911 wrote:Wun's definition of weight (rim alone in size 15").

wun-weight < 4.0 kg

lite-weight is 4.0-5.5 kg

mid-wieght is 5.5-7.0 kg

FFG-weight is 7.0-9.0 kg


you should run on 4 space savers :P


Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 387 guests