handbrake light stuck on.. solved!

Audio, Electronics and Lighting questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

User avatar
doogle
Driver
Posts: 91
Joined: Sun Jun 08, 2008 11:55 am
Vehicle: NA6
Location: Melbourne

handbrake light stuck on.. solved!

Postby doogle » Wed Apr 29, 2009 12:19 am

hey everybody. i noticed my handbrake light comes on when i drive quick around corners. it would stay on for a few seconds. it got worse, staying on longer and longer til the point where its been on for the last 2 days. came off tonight when i was driving home, before i eased the car literally around the next corner and its back on :evil: fastfreddygassit told me it might be some wires leaning on eachother round the corner, but im not sure where to start looking for this and which wires to look for. (i have an NA)

has anybody else come across this?
cheers :D
Last edited by doogle on Mon May 04, 2009 4:50 pm, edited 1 time in total.

User avatar
SuperMazdaKart
Racing Driver
Posts: 1980
Joined: Tue Oct 26, 2004 9:10 pm
Vehicle: ND - 2 GT
Location: Adelaide

handbrake light stuck on.. weird!

Postby SuperMazdaKart » Wed Apr 29, 2009 12:36 am

take out the centre console & have a look at the wiring for anything sus?

323s have the same sympton when the brake fluid in the reservoir got low enough that when cornering the sensor in there wouldn't be submerged & then lit up the brake icon in the dash. easily fixed by slightly overfilling the reservoir. might be the same thing on the MX-5, it's been a while since i've had a 5.
Image

User avatar
Garry
Speed Racer
Posts: 3481
Joined: Sun Apr 27, 2003 11:00 am
Vehicle: NB SP
Location: God's Country
Contact:

handbrake light stuck on.. weird!

Postby Garry » Wed Apr 29, 2009 10:11 am

What SMK said. Check the brake fluid level in the resevoir, if thats OK then start looking for dodgy wiring.
Shiney black one with added red bits. Member of the fart club. Now with extra doof and Sunlong. - deceased and gone to heaven

User avatar
Matty
Racing Driver
Posts: 1652
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NB8A
Location: Melbourne
Contact:

handbrake light stuck on.. weird!

Postby Matty » Wed Apr 29, 2009 10:57 pm

Garry wrote:What SMK said. Check the brake fluid level in the resevoir, if thats OK then start looking for dodgy wiring.

And if it's low, start looking for a leak.

User avatar
Gazbo
Fast Driver
Posts: 244
Joined: Fri Jul 14, 2006 8:16 pm
Vehicle: ND - 2 GT
Location: Sydney-ish

handbrake light stuck on.. weird!

Postby Gazbo » Thu Apr 30, 2009 10:42 pm

It's certainly caused by low brake fluid level in the reservoir.

The brake warning light serves two purposes, an indication that the hand-brake is set on, and a warning that there is a fault in the brake system.
Daily: 2006 "C" Mazda3 SP23
Fun: 1993 NA6
Image

User avatar
doogle
Driver
Posts: 91
Joined: Sun Jun 08, 2008 11:55 am
Vehicle: NA6
Location: Melbourne

handbrake light stuck on.. weird!

Postby doogle » Fri May 01, 2009 1:44 am

thanks for the replies. from memory i think my fluid was reaching the low level, i will have a look and if so top it up on the weekend!

User avatar
Okibi
Speed Racer
Posts: 10898
Joined: Thu Aug 21, 2003 11:00 am
Vehicle: NB SE
Location: Perth, Western Australia
Contact:

handbrake light stuck on.. weird!

Postby Okibi » Fri May 01, 2009 5:33 pm

doogle wrote:thanks for the replies. from memory i think my fluid was reaching the low level, i will have a look and if so top it up on the weekend!


If you notice your brake fluid is anything other than at the full mark always top it up.

If you've lost ANY fluid chances are there's a leak, top it up and keep a VERY close eye on it. If there's a leak you don't want to be driving around and run out of fluid. :shock:
If you had access to a car like this, would you take it back right away? Neither would I.

mr_rotary
Racing Driver
Posts: 502
Joined: Wed Sep 28, 2005 1:26 pm
Vehicle: ND - 2 GT
Location: Western Australia

handbrake light stuck on.. weird!

Postby mr_rotary » Fri May 01, 2009 7:45 pm

Also check your rear calipers for leaks :wink:

User avatar
doogle
Driver
Posts: 91
Joined: Sun Jun 08, 2008 11:55 am
Vehicle: NA6
Location: Melbourne

handbrake light stuck on.. solved!

Postby doogle » Mon May 04, 2009 4:49 pm

solved. it was the low level of brake fluid in the reservoir.
thanks to wun for helping me bleed the brakes and finding the leaky calliper too

wun911
Speed Racer
Posts: 2114
Joined: Tue Sep 11, 2007 12:13 pm
Vehicle: ND - 2 GT
Location: Melbourne

handbrake light stuck on.. solved!

Postby wun911 » Mon May 04, 2009 8:05 pm

https://www.mx5centre.com.au/index.php? ... cts_id=145

There is a rear caliper seal kit it seems kinda cheap. I have never fixed up a caliper before but if you trust me with your life I'm happy to have a go :D

anyone know where I can get a rear seal kit and a new hex adjuster for NB8B???
every ounce counts

mr_rotary
Racing Driver
Posts: 502
Joined: Wed Sep 28, 2005 1:26 pm
Vehicle: ND - 2 GT
Location: Western Australia

handbrake light stuck on.. solved!

Postby mr_rotary » Mon May 04, 2009 8:18 pm

They don't sell then here seperately at Mazda last time I checked a few years ago.
Also be weary of your piston and that it's not too badly pitted that you need a new one!

MX-5 parts in the UK have these.
Rear Caliper Seal Kit:
http://www.mx5parts.co.uk/product_info.php/products_id/306

Image

Hex Adjustor:
http://www.mx5parts.co.uk/product_info.php/products_id/309

Image

I also found these on E-Bay for a good price:
http://cgi.ebay.com/MX5-EUNOS-MIATA-REAR-BRAKE-CALIPERS-PAIR-BRAND-NEW_W0QQitemZ120378575460QQihZ002QQcategoryZ52640QQssPageNameZWD2VQQrdZ1QQcmdZViewItemQQ_trksidZp1638Q2em122

Speedyblue
Fast Driver
Posts: 123
Joined: Tue Jan 06, 2009 7:28 pm
Vehicle: ND - 2 GT
Location: Gold Coast

handbrake light stuck on.. solved!

Postby Speedyblue » Mon May 04, 2009 10:15 pm

If your brake system doesn't have a leak, you shouldn't top up the fluid. As your brake pads wear, the pistons will come further out of the calipers and the fluid level will drop a little. When you put new pads in, you push the pistons back in and if you have just re-filled the system up, there will be more fluid than capacity :D There is a reason why I know this :D
Not RED

User avatar
fattima
Racing Driver
Posts: 602
Joined: Thu Aug 23, 2007 5:49 am
Vehicle: ND - 2 GT
Location: Melbourne

handbrake light stuck on.. solved!

Postby fattima » Mon May 04, 2009 10:57 pm

Doogle I mentioned to you on Sunday I got my brake kit from the UK, this is the link

http://www.biggred.co.uk/

They are very easy to replace the seals in, compressed air helps to get the piston out. If your piston or bore is scored it may be cheaper to get a second hand caliper to repair.


Return to “MX5 Audio, Electronics & Lighting”

Who is online

Users browsing this forum: No registered users and 251 guests