Ebay Turbo (Please dont hurt me! :p)
Moderators: timk, Stu, zombie, The American, Lokiel, -alex, StanTheMan, greenMachine, ManiacLachy, Daffy, Sean
- daffyflyer
- Fast Driver
- Posts: 457
- Joined: Thu Dec 04, 2008 10:11 am
- Vehicle: Clubman
- Location: Caulfield
- Contact:
Ebay Turbo (Please dont hurt me! :p)
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... SS:AU:1123
I know, i know... its an ebay turbo... Considering getting it with the mindset that if anything goes bang it gets replaced, if its reliable it stays.
Am i insane? I don't mind having to replace a few things down the line, as long as its not total crap...
I know, i know... its an ebay turbo... Considering getting it with the mindset that if anything goes bang it gets replaced, if its reliable it stays.
Am i insane? I don't mind having to replace a few things down the line, as long as its not total crap...
Developing a Car Industry Game - Visit www.automationgame.com
White 1994 MX5 Clubman - Carco Built NA Motor - 101kw ATW @ 7500rpm
White 1994 MX5 Clubman - Carco Built NA Motor - 101kw ATW @ 7500rpm
- Boags
- Speed Racer
- Posts: 3533
- Joined: Thu Nov 10, 2005 6:25 pm
- Vehicle: NB SP
- Location: Brisvegas
- Contact:
Ebay Turbo (Please dont hurt me! :p)
To quote one of the friendly people @ miataturbo.net:
If you buy that I will punch you through the interwebs.
If you buy that I will punch you through the interwebs.
Spartan Motor Sport : http://www.SpartanMS.com.au
- bruce
- Speed Racer
- Posts: 7707
- Joined: Fri Apr 25, 2003 11:00 am
- Vehicle: NA8 - Turbo
- Location: Victoria
- Contact:
Ebay Turbo (Please dont hurt me! :p)
Boags wrote:If you buy that I will punch you through the interwebs.
..right in the interballs.
- daffyflyer
- Fast Driver
- Posts: 457
- Joined: Thu Dec 04, 2008 10:11 am
- Vehicle: Clubman
- Location: Caulfield
- Contact:
Ebay Turbo (Please dont hurt me! :p)
Figured that would be the response!
What is the weak point of a kit like that, as in whats the bit you'd be MOST scared of?
What is the weak point of a kit like that, as in whats the bit you'd be MOST scared of?
Developing a Car Industry Game - Visit www.automationgame.com
White 1994 MX5 Clubman - Carco Built NA Motor - 101kw ATW @ 7500rpm
White 1994 MX5 Clubman - Carco Built NA Motor - 101kw ATW @ 7500rpm
-
- Fast Driver
- Posts: 293
- Joined: Wed Jun 18, 2008 11:02 am
- Vehicle: ND - 2 GT
- Location: Melbourne
Ebay Turbo (Please dont hurt me! :p)
The cooler's leak, the manifolds crack and the turbo's explode.
- Boags
- Speed Racer
- Posts: 3533
- Joined: Thu Nov 10, 2005 6:25 pm
- Vehicle: NB SP
- Location: Brisvegas
- Contact:
Ebay Turbo (Please dont hurt me! :p)
Moto wrote:The cooler's leak, the manifolds crack and the turbo's explode.
Yep.
Spartan Motor Sport : http://www.SpartanMS.com.au
- philz
- Wheel guru
- Posts: 1297
- Joined: Wed Jun 04, 2008 4:32 pm
- Vehicle: ND - 2 GT
- Location: Sydney
Ebay Turbo (Please dont hurt me! :p)
It doesn't look like one of those "generic" turbo kits.
However that turbo is a Garrett T28 I doubt it's going to explode, the weak link looks like the manifold and cooler.
However that turbo is a Garrett T28 I doubt it's going to explode, the weak link looks like the manifold and cooler.
- daffyflyer
- Fast Driver
- Posts: 457
- Joined: Thu Dec 04, 2008 10:11 am
- Vehicle: Clubman
- Location: Caulfield
- Contact:
Ebay Turbo (Please dont hurt me! :p)
philz wrote:It doesn't look like one of those "generic" turbo kits.
However that turbo is a Garrett T28 I doubt it's going to explode, the weak link looks like the manifold and cooler.
Surely its a knock off T28.
I think you might find its a "Garret Torbocharger" as on teh front page of http://www.miataturbo.net/
I know there is a huge stigma around ebay turbos, but i want to know if anyone knows anything, and if it might be worth using as a basis, only replacing the crappy stuff, and keeping what proves to be not sh*t
In the end a lot of it (or all of it!) may get replaced (if needed), but im all for trying it out and finding whats bad.. is it worth a go? or should i just plonk down $4k or so on a proper kit (in about 6 months when i have that much )
Developing a Car Industry Game - Visit www.automationgame.com
White 1994 MX5 Clubman - Carco Built NA Motor - 101kw ATW @ 7500rpm
White 1994 MX5 Clubman - Carco Built NA Motor - 101kw ATW @ 7500rpm
- daffyflyer
- Fast Driver
- Posts: 457
- Joined: Thu Dec 04, 2008 10:11 am
- Vehicle: Clubman
- Location: Caulfield
- Contact:
Ebay Turbo (Please dont hurt me! :p)
and any punches in the interballs will be fully justified...
Developing a Car Industry Game - Visit www.automationgame.com
White 1994 MX5 Clubman - Carco Built NA Motor - 101kw ATW @ 7500rpm
White 1994 MX5 Clubman - Carco Built NA Motor - 101kw ATW @ 7500rpm
- philz
- Wheel guru
- Posts: 1297
- Joined: Wed Jun 04, 2008 4:32 pm
- Vehicle: ND - 2 GT
- Location: Sydney
Ebay Turbo (Please dont hurt me! :p)
Yes I was skeptical on that turbo as well, China can fake anything now.
Yes spend the extra dosh on a proper kit, or go s/c
Yes spend the extra dosh on a proper kit, or go s/c
-
- Racing Driver
- Posts: 1692
- Joined: Thu Apr 06, 2006 7:48 pm
- Vehicle: NA6
- Location: Sydney
- Contact:
Ebay Turbo (Please dont hurt me! :p)
daffyflyer wrote:philz wrote:It doesn't look like one of those "generic" turbo kits.
However that turbo is a Garrett T28 I doubt it's going to explode, the weak link looks like the manifold and cooler.
Surely its a knock off T28.
I think you might find its a "Garret Torbocharger" as on teh front page of http://www.miataturbo.net/
I know there is a huge stigma around ebay turbos, but i want to know if anyone knows anything, and if it might be worth using as a basis, only replacing the crappy stuff, and keeping what proves to be not sh*t
In the end a lot of it (or all of it!) may get replaced (if needed), but im all for trying it out and finding whats bad.. is it worth a go? or should i just plonk down $4k or so on a proper kit (in about 6 months when i have that much )
i was considering this myself, however there are too many things in that kit that i am not happy with. Just build your own kit or try source a used AVO kit.
http://Run-It-Hard.com - We're here to have fun!
- GS
- Fast Driver
- Posts: 260
- Joined: Mon May 15, 2006 6:40 pm
- Vehicle: NA6
- Location: Sydney
Ebay Turbo (Please dont hurt me! :p)
I can see where you're coming from Daffy. If you get 1-2 years out of the chinaturbo before it grenades, them you can just replace with a cheap 2nd hand Nissan one. If the cooler leaks/cracks, you can just reach inside the front bumper and replace it with another $150 one. But the manifold would be the thing i'd be most concerned about. From all reports the thin wall chinese manifolds can start cracking within months. And unless you're triple jointed and enjoy S&M in you're spare time, removing and bolting in turbo manifolds on a regular basis isnt my idea of fun.
1989 NA6
- blackster
- Racing Driver
- Posts: 782
- Joined: Wed Jun 28, 2006 2:11 am
- Vehicle: ND - 2 GT
- Location: Sydney
Ebay Turbo (Please dont hurt me! :p)
How is the EGR routed on that setup. The outlets from each tuned length? onto the flange look horrendous.
daffyflyer wrote:philz wrote:It doesn't look like one of those "generic" turbo kits.
However that turbo is a Garrett T28 I doubt it's going to explode, the weak link looks like the manifold and cooler.
Surely its a knock off T28.
I think you might find its a "Garret Torbocharger" as on teh front page of http://www.miataturbo.net/
Agreed
Previous
04' MX5 SE.
02' MX5 Classic ed.
04' MX5 SE.
02' MX5 Classic ed.
- AJ
- Speed Racer
- Posts: 4349
- Joined: Sun Oct 30, 2005 8:27 pm
- Vehicle: NC
- Location: Gold Coast
Ebay Turbo (Please dont hurt me! :p)
daffyflyer wrote:philz wrote:It doesn't look like one of those "generic" turbo kits.
However that turbo is a Garrett T28 I doubt it's going to explode, the weak link looks like the manifold and cooler.
Surely its a knock off T28.
I think you might find its a "Garret Torbocharger" as on teh front page of http://www.miataturbo.net/
I know there is a huge stigma around ebay turbos, but i want to know if anyone knows anything, and if it might be worth using as a basis, only replacing the crappy stuff, and keeping what proves to be not sh*t
In the end a lot of it (or all of it!) may get replaced (if needed), but im all for trying it out and finding whats bad.. is it worth a go? or should i just plonk down $4k or so on a proper kit (in about 6 months when i have that much )
don't forget that when the chinee lipoff go bangboombang, that bits of it may be ingested by your quality Japanese engine & that CAN get bloody expensive.
Don't worry about what people think, they don't do it very often
XMX5 Rogues
- blackster
- Racing Driver
- Posts: 782
- Joined: Wed Jun 28, 2006 2:11 am
- Vehicle: ND - 2 GT
- Location: Sydney
Ebay Turbo (Please dont hurt me! :p)
It appear's the aus seller is only selling part of the kit.
http://cgi.ebay.com/ebaymotors/JDMS-94- ... 0376859755
From the chinese seller?
http://cgi.ebay.com/ebaymotors/JDMS-94- ... 0376859755
From the chinese seller?
NOTE: All of turbo parts and accessories do need to modification in order to fits perfectly.
Previous
04' MX5 SE.
02' MX5 Classic ed.
04' MX5 SE.
02' MX5 Classic ed.
Return to “MX5 Forced induction (Turbo/Supercharger)”
Who is online
Users browsing this forum: No registered users and 0 guests