Clunking from front suspension

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

User avatar
madboy
Fast Driver
Posts: 288
Joined: Sun Nov 23, 2008 9:24 pm
Vehicle: NA6
Location: Gold Coast

Clunking from front suspension

Postby madboy » Mon Mar 30, 2009 11:42 am

I am getting a clunking sound from my front suspension, most often as i turn the wheel full lock to exit my carport, again when i brake to ease down the curb and sometimes when i stop at the lights.

This didn't start till just after grump and i fitted the braces we made up.

I am hoping it is just shot bushings giving the control arms room to moving in... not that this is a good thing but... could it be anything else major?

cheers
MB

User avatar
Locutus
Racing Driver
Posts: 879
Joined: Thu Jul 26, 2007 7:39 pm
Vehicle: NB SP
Location: Sydney
Contact:

Clunking from front suspension

Postby Locutus » Mon Mar 30, 2009 2:00 pm

mine used to clunk when coming to a stop at the lights. turned out to be a loose lower control arm bolt. :shock:

previous alignment was performed by mob very highly regarded on this forum.

User avatar
Daz
Fast Driver
Posts: 264
Joined: Fri Sep 26, 2003 9:43 am
Vehicle: NB SP
Location: Sydney

Clunking from front suspension

Postby Daz » Mon Mar 30, 2009 5:13 pm

Locutus wrote:mine used to clunk when coming to a stop at the lights. turned out to be a loose lower control arm bolt. :shock:

previous alignment was performed by mob very highly regarded on this forum.


Same experience for me, got some dodgy alignment done and my next service found a loose bolt in the front... symptom was a loud clunk under hard cornering.

Take it to someone that knows the front end of an MX5 and have them check it.
Silver SP - PSS9, 1:10:58

User avatar
madboy
Fast Driver
Posts: 288
Joined: Sun Nov 23, 2008 9:24 pm
Vehicle: NA6
Location: Gold Coast

Clunking from front suspension

Postby madboy » Tue Mar 31, 2009 9:15 am

I'll take it back to the guys who did my alignment then, see what they can find

cheers

Jace
Racing Driver
Posts: 661
Joined: Fri Oct 24, 2008 7:47 pm
Vehicle: NA6
Location: Geelong

Clunking from front suspension

Postby Jace » Wed Apr 01, 2009 7:34 pm

i had the same noise. i just got under there and tightened up everything that i could, mainly the control arm bolts ( LCA bolts worked their way a little bit loose after i replaced it) and it's fine now.

RG.net
Racing Driver
Posts: 1692
Joined: Thu Apr 06, 2006 7:48 pm
Vehicle: NA6
Location: Sydney
Contact:

Clunking from front suspension

Postby RG.net » Wed Apr 01, 2009 9:27 pm

mine has started doing this since i slammed my car, however i have read that the endlinks tend to flex once your at my height and causes noises like this ... i still need to get some adjustable endlinks to avoid unwanted preload.
http://Run-It-Hard.com - We're here to have fun!

mr_rotary
Racing Driver
Posts: 502
Joined: Wed Sep 28, 2005 1:26 pm
Vehicle: ND - 2 GT
Location: Western Australia

Clunking from front suspension

Postby mr_rotary » Fri Apr 03, 2009 7:45 pm

On mine, it was a lower ball joint.


Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 321 guests