OBX style Bar

Body, Paint, Interior and Trim questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

User avatar
Regie
Speed Racer
Posts: 4259
Joined: Thu May 15, 2008 3:02 pm
Vehicle: NC - V8
Location: Sydney

OBX style Bar

Postby Regie » Thu Jul 24, 2008 5:34 pm

good afternoon.
i bought one of these style bars from MX mania today. There is any pointers on installing the bar? from the looks of it, it needs some cutting of the plastic trim to make it fit.
Any pointers would be tops

Cheers
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more

User avatar
Regie
Speed Racer
Posts: 4259
Joined: Thu May 15, 2008 3:02 pm
Vehicle: NC - V8
Location: Sydney

Re: OBX style Bar

Postby Regie » Mon Jul 28, 2008 7:38 pm

anything? or should i write up something when i get around to doing it :P
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more

Mr Morlock
Speed Racer
Posts: 6444
Joined: Mon Feb 04, 2008 11:40 am
Vehicle: NB8B
Location: Melbourne

OBX style Bar

Postby Mr Morlock » Wed Jul 30, 2008 6:56 pm

Regie an earlier post was lost in the transition. If you bought the product from Mania I would expect that they would have advice available on installation.

User avatar
Regie
Speed Racer
Posts: 4259
Joined: Thu May 15, 2008 3:02 pm
Vehicle: NC - V8
Location: Sydney

OBX style Bar

Postby Regie » Wed Jul 30, 2008 7:49 pm

cheers mate im going to attack it tomorrow!
horay for good weather
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more

User avatar
Regie
Speed Racer
Posts: 4259
Joined: Thu May 15, 2008 3:02 pm
Vehicle: NC - V8
Location: Sydney

OBX style Bar

Postby Regie » Thu Jul 31, 2008 1:48 pm

ok its installed and wow the rear end feels sooo much more stiffer. goes round corners like its got glue on the tyres. definate handling improvement! ill post up pics later!
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more

li21

OBX style Bar

Postby li21 » Fri Mar 13, 2009 5:23 pm

Regie wrote:ok its installed and wow the rear end feels sooo much more stiffer. goes round corners like its got glue on the tyres. definate handling improvement! ill post up pics later!


know its been a while .. but pics please:)
I've just thought about getting one of these..

Was it hard to DIY?

li21

OBX style Bar

Postby li21 » Sun Mar 15, 2009 2:13 am

Are there any know issues with roof clearance for the OBX or similar syle bars in an NA6

User avatar
sliq
Speed Racer
Posts: 3414
Joined: Sat Jan 13, 2007 12:33 am
Vehicle: ND - 2 GT
Location: Sydney
Contact:

OBX style Bar

Postby sliq » Sun Mar 15, 2009 9:37 am

li21 wrote:Are there any know issues with roof clearance for the OBX or similar syle bars in an NA6


i don't think they should, since they sit not much higher than the na seats.. and the na seats are fairly low imo compared to nb8b ones.
i can't brain today.. i have the dumb..

li21

OBX style Bar

Postby li21 » Wed Mar 18, 2009 8:20 pm

sliq wrote:
li21 wrote:Are there any know issues with roof clearance for the OBX or similar syle bars in an NA6


i don't think they should, since they sit not much higher than the na seats.. and the na seats are fairly low imo compared to nb8b ones.


Hmm.. the pictures ive seen show they sit quite a bit above the NA seats and only just above NB seats?
Just heard that they are a tight fit on the early hoods.. Guess ill call Mania tomorrow and check :)


Return to “MX5 Body, Paint, Interior & Trim”

Who is online

Users browsing this forum: No registered users and 47 guests