OMX-596 - 1996 Spec'd NA6 - Updated 21 Apr 2013

Postby **orx626** » Wed Feb 11, 2009 11:33 am

Okibi wrote:It looks like that pipe reduces slightly to accommodate that foam filter, I thought you'd wanna go the other way?

Actually it increases to accommodate the silicon hose...63.5mm up to 70mm.....I couldn't be stuffed getting a new bit of silicon :lol:

.

Cheers,
Danny

Big G · Postby **Big G** » Wed Feb 11, 2009 3:28 pm

Which dyno are you going to use Danny?

Postby **orx626** » Wed Feb 11, 2009 4:16 pm

Big G wrote:Which dyno are you going to use Danny?

TAS of course Geoff :mrgreen:

Postby **orx626** » Wed Feb 11, 2009 4:49 pm

Got in and fitted an aftermarket windscreen washer bottle today as there is no way that the standard one will fit with the supercharger inlet and where I fitted the alarm.

Pressed up a bit of 1.6mm stainless steel, 4 holes and 2 nutserts and Bob's your uncle! :lol:

Cheers,
Danny

16bit · Postby **16bit** » Wed Feb 11, 2009 4:56 pm

what sort of power are you hoping for? about 130-140wkw?

Postby **orx626** » Wed Feb 11, 2009 5:11 pm

16bit wrote:what sort of power are you hoping for? about 130-140wkw?

Hi James, on 7psi and non-intercooled....it should make 120rwkw. That's what I'm hoping for anyway. This is the best the JR kit will do as it stands. The M45 is at it's rpm limit. The bottom end and mid-range torque is quite impressive. That is the basis of the kit...not a peak hp number.

Cheers,
Danny

grump · Postby **grump** » Wed Feb 11, 2009 5:39 pm

only 2 more sleeps Danny, will be interested to see what the Dyno says. I must say it is one of the nicest installations I have ever seen, the photos don't do it justice.

Postby **orx626** » Wed Feb 11, 2009 5:44 pm

grump wrote:only 2 more sleeps Danny, will be interested to see what the Dyno says. I must say it is one of the nicest installations I have ever seen, the photos don't do it justice.

Thanks Grump :mrgreen:

. Yes, I'm looking forward to Friday...hope that the day doesn't become the "Friday the 13th" :shock:

!!!

Cheers,
Danny

grump · Postby **grump** » Wed Feb 11, 2009 5:56 pm

I know what you mean by Friday the 13th Danny, I'm heading to Sydney with Terry to pick up Scooter on Friday. Wish us luck, at least we will have a bloody good laugh if anything goes wrong.

16bit · Postby **16bit** » Wed Feb 11, 2009 6:05 pm

should be a really nice torque curve - should promote nice sideways action.

Hammer · Postby **Hammer** » Wed Feb 11, 2009 6:10 pm

Danny, that water bottle looks OEM. Well done.

So what is it out from? Did it come with the supercharger?

Postby **orx626** » Wed Feb 11, 2009 7:27 pm

Hammer wrote:Danny, that water bottle looks OEM. Well done.

So what is it out from? Did it come with the supercharger?

Hammer, it's made by Flexible Drive Agencies and sold by Bursons. I can give you the part number if you like...the box is in my office.

Cheers,
Danny

Postby **orx626** » Wed Feb 11, 2009 7:32 pm

16bit wrote:should be a really nice torque curve - should promote nice sideways action.

Hopefully not too much sideways action (unintentional anyway)

. Here's hoping that the extra punch out of the corners shaves some fractions of a second off the lap times.

Cheers,
Danny

Postby **orx626** » Wed Feb 11, 2009 7:33 pm

grump wrote:I know what you mean by Friday the 13th Danny, I'm heading to Sydney with Terry to pick up Scooter on Friday. Wish us luck, at least we will have a bloody good laugh if anything goes wrong.

Hope you and Terry have a safe trip there and back

. See you and Scooter sometime soon.

Cheers,
Danny