quick release hubs
Moderators: timk, Stu, zombie, Andrew, -alex, miata
- 16bit
- Speed Racer
- Posts: 2346
- Joined: Wed Nov 29, 2006 1:51 pm
- Vehicle: NB8A - Supercharged
- Location: Brisbane Southside
quick release hubs
just wondering if these need a boss kit too or not? silly question but I assume not.
98 evo gold - rotrexed and loving it.
This post has been printed using recycled pixels
This post has been printed using recycled pixels
-
- Racing Driver
- Posts: 1692
- Joined: Thu Apr 06, 2006 7:48 pm
- Vehicle: NA6
- Location: Sydney
- Contact:
quick release hubs
16bit wrote:just wondering if these need a boss kit too or not? silly question but I assume not.
sure do. also means bye bye to your airbag.
http://Run-It-Hard.com - We're here to have fun!
- 16bit
- Speed Racer
- Posts: 2346
- Joined: Wed Nov 29, 2006 1:51 pm
- Vehicle: NB8A - Supercharged
- Location: Brisbane Southside
quick release hubs
yeah I would prefer it to be gone. my car is getting more and more of a compromise - it will probably be a track only toy very soon so harness and all that to come.
98 evo gold - rotrexed and loving it.
This post has been printed using recycled pixels
This post has been printed using recycled pixels
- 16bit
- Speed Racer
- Posts: 2346
- Joined: Wed Nov 29, 2006 1:51 pm
- Vehicle: NB8A - Supercharged
- Location: Brisbane Southside
quick release hubs
so to confirm these do need a boss kit
98 evo gold - rotrexed and loving it.
This post has been printed using recycled pixels
This post has been printed using recycled pixels
-
- Racing Driver
- Posts: 1692
- Joined: Thu Apr 06, 2006 7:48 pm
- Vehicle: NA6
- Location: Sydney
- Contact:
quick release hubs
16bit wrote:yeah I would prefer it to be gone. my car is getting more and more of a compromise - it will probably be a track only toy very soon so harness and all that to come.
sounds like your going down the same path i am!
yes, you need a bosskit dude, i am running a quick release, it attatchs to the bosskit and the bosskit attatchs to the steering colum. Beware though, a quick release will push your steering wheel closer towards you though. However iirc you are also running a sparco sprint, and if your as tall as me (6 foot roughly) then you should be fine. I love how everything is, its perfect for me and much better then what it was then stock.
http://Run-It-Hard.com - We're here to have fun!
- 16bit
- Speed Racer
- Posts: 2346
- Joined: Wed Nov 29, 2006 1:51 pm
- Vehicle: NB8A - Supercharged
- Location: Brisbane Southside
quick release hubs
na i am only about 5 8. so I should not get the slimline one by the sounds of it.
98 evo gold - rotrexed and loving it.
This post has been printed using recycled pixels
This post has been printed using recycled pixels
-
- Racing Driver
- Posts: 1692
- Joined: Thu Apr 06, 2006 7:48 pm
- Vehicle: NA6
- Location: Sydney
- Contact:
quick release hubs
16bit wrote:na i am only about 5 8. so I should not get the slimline one by the sounds of it.
nah no need for it, i have a works bel quick release (lots of generic ones look very similar to this) if your seat is not at full travel, it might be once this is installed, as this happened to me, but worked in favour because i have long legs and now i am not so cramped.
http://Run-It-Hard.com - We're here to have fun!
-
- Speed Racer
- Posts: 2114
- Joined: Tue Sep 11, 2007 12:13 pm
- Vehicle: ND - 2 GT
- Location: Melbourne
quick release hubs
I'm parking my car on the street these days so I would like to get a removable wheel.
I knda want the nardi with 2 spokes and hardly any wheel to hold on to (cant find the pic anymore).
Are there any insurance/legal issues to worry about with removal of air bags and detachable wheels?
I knda want the nardi with 2 spokes and hardly any wheel to hold on to (cant find the pic anymore).
Are there any insurance/legal issues to worry about with removal of air bags and detachable wheels?
every ounce counts
- 16bit
- Speed Racer
- Posts: 2346
- Joined: Wed Nov 29, 2006 1:51 pm
- Vehicle: NB8A - Supercharged
- Location: Brisbane Southside
quick release hubs
sh*t i hate being all the way back as my legs are uncomfortable when pressing the clutch pedal in and alike. I will figure it out.
98 evo gold - rotrexed and loving it.
This post has been printed using recycled pixels
This post has been printed using recycled pixels
-
- Racing Driver
- Posts: 1692
- Joined: Thu Apr 06, 2006 7:48 pm
- Vehicle: NA6
- Location: Sydney
- Contact:
quick release hubs
16bit wrote:sh*t i hate being all the way back as my legs are uncomfortable when pressing the clutch pedal in and alike. I will figure it out.
actually, i have one notch left. i am also using a 330mm steering wheel, i'm sure if i were using a bigger one then i might need to go further back.
http://Run-It-Hard.com - We're here to have fun!
-
- Racing Driver
- Posts: 1692
- Joined: Thu Apr 06, 2006 7:48 pm
- Vehicle: NA6
- Location: Sydney
- Contact:
quick release hubs
wun911 wrote:Are there any insurance/legal issues to worry about with removal of air bags and detachable wheels?
definately! but i dislike the airbagged wheel so much! and my theory of harness is safer then airbag thing to.
i'm sure there is a way to be able to get it engerniered (at least i hope there is) the only thing that gives it away really is the passenger airbag (i have put the mazda writting logo over SRS Airbag, to try hide it )
http://Run-It-Hard.com - We're here to have fun!
-
- Racing Driver
- Posts: 1692
- Joined: Thu Apr 06, 2006 7:48 pm
- Vehicle: NA6
- Location: Sydney
- Contact:
quick release hubs
just did some research for you mate, you can go the smaller hub from works bell and keep the length of the quick release, however these arent cheap!
http://miataroadster.com/worksbell.html
i have both works bell gear, and they are awsome, and the hub kit looks oem!
http://miataroadster.com/worksbell.html
i have both works bell gear, and they are awsome, and the hub kit looks oem!
http://Run-It-Hard.com - We're here to have fun!
-
- Speed Racer
- Posts: 2114
- Joined: Tue Sep 11, 2007 12:13 pm
- Vehicle: ND - 2 GT
- Location: Melbourne
quick release hubs
Dead weight should die on impact.
Have you removed passenger air bag? Was it easy?
Have you removed passenger air bag? Was it easy?
every ounce counts
-
- Racing Driver
- Posts: 1692
- Joined: Thu Apr 06, 2006 7:48 pm
- Vehicle: NA6
- Location: Sydney
- Contact:
quick release hubs
wun911 wrote:Dead weight should die on impact.
Have you removed passenger air bag? Was it easy?
no i havent, dont really thing i should either, god forbid but if an accident does happen where my passenger could of been saved with the airbag, then i dont know what i would do with myself.
http://Run-It-Hard.com - We're here to have fun!
-
- Speed Racer
- Posts: 2114
- Joined: Tue Sep 11, 2007 12:13 pm
- Vehicle: ND - 2 GT
- Location: Melbourne
quick release hubs
Whoa 300 bux kinda expensive. I can't imagine this as a GB item.
every ounce counts
Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: No registered users and 245 guests