MX5 Factory CAI setup (with pics) 56k warning
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
- SuperMazdaKart
- Racing Driver
- Posts: 1980
- Joined: Tue Oct 26, 2004 9:10 pm
- Vehicle: ND - 2 GT
- Location: Adelaide
MX5 Factory CAI setup (with pics) 56k warning
Well, wheres the MX5 Factory sticker on your filter case? They used to put one on there didn't they?
- meanmx
- Racing Driver
- Posts: 1493
- Joined: Mon Aug 14, 2006 11:41 pm
- Vehicle: NB8B
- Location: Point Cook, Melbourne
MX5 Factory CAI setup (with pics) 56k warning
If Fast freddy didn't offer me such a good price I would have gone DIY as well. These aren't particularly hard to make and I think both Mania and Mx5factory rip you off. In fact it was the price of the intake that really put me off The Mx5factory in the first place. It has definately improved since the early days when it looked like an empty paint can with a hose coming out. For the same price roughly I would have easily opted for the K&N Apollo kit. However great write up. Your theories on why yours is a better intake than the mania one though leaves a bit to be desired. Good on you for putting in the effort
Ben
Ben
2014 VW Mk7 Golf R
2001 Black NB8B viewtopic.php?f=57&t=58136
1986 Mazda Luce Royal Classic (13BT Mazda 929)
2001 Black NB8B viewtopic.php?f=57&t=58136
1986 Mazda Luce Royal Classic (13BT Mazda 929)
- crzymx
- Fast Driver
- Posts: 414
- Joined: Wed Nov 05, 2008 11:43 pm
- Vehicle: ND - 2 GT
- Location: Melbourne
MX5 Factory CAI setup (with pics) 56k warning
Well basically im just going by logic. Bigger pod, better induction. Better quality pod, better filtration of air. Is that not right? In terms of asthetic difference, it is debatable, and im not a fan of the tubing on the mx5factory intake. There, make sense?
As for the sticker, i mentioned that i relocated it to the front of the engine bay.
As for the sticker, i mentioned that i relocated it to the front of the engine bay.
DIY is the new black!
- madboy
- Fast Driver
- Posts: 288
- Joined: Sun Nov 23, 2008 9:24 pm
- Vehicle: NA6
- Location: Gold Coast
MX5 Factory CAI setup (with pics) 56k warning
ahh grasshopper, bigger is not always better
-
- Speed Racer
- Posts: 2114
- Joined: Tue Sep 11, 2007 12:13 pm
- Vehicle: ND - 2 GT
- Location: Melbourne
MX5 Factory CAI setup (with pics) 56k warning
Sorry I dont mean to be rude but may I ask how much it is?
And how much the K& N kit are?
And how much the K& N kit are?
every ounce counts
- crzymx
- Fast Driver
- Posts: 414
- Joined: Wed Nov 05, 2008 11:43 pm
- Vehicle: ND - 2 GT
- Location: Melbourne
MX5 Factory CAI setup (with pics) 56k warning
I went over that before, its 500 inclusive of gst. Yeah i know.
And i know bigger is not always better, but the actual filter itself is worth 200 bucks. Dont know what the other 250 covers :S
And i know bigger is not always better, but the actual filter itself is worth 200 bucks. Dont know what the other 250 covers :S
DIY is the new black!
- AB7
- Racing Driver
- Posts: 637
- Joined: Thu Jun 07, 2007 2:42 pm
- Vehicle: ND - 2 GT
- Location: Melbourne
MX5 Factory CAI setup (with pics) 56k warning
Wow, for $500 you could get BMC CDA, which IMO the best filter out there...but hey, as long you are happy with it.
Thanks for the write up and sharing.
Thanks for the write up and sharing.
- philz
- Wheel guru
- Posts: 1297
- Joined: Wed Jun 04, 2008 4:32 pm
- Vehicle: ND - 2 GT
- Location: Sydney
MX5 Factory CAI setup (with pics) 56k warning
K&N is $200-$220 around there [ note that it's universal, so you'll probably have to make your own mounts]
- irwin83r
- Racing Driver
- Posts: 1563
- Joined: Wed Feb 25, 2004 8:32 pm
- Vehicle: NB8A
- Location: wollongong
- Contact:
MX5 Factory CAI setup (with pics) 56k warning
the big thing id look at chaing is the pipe going across the front of the motor.
next hot day... today even or after a little bit of enthusiastic driving pop the bonnet put your hand on the intake pipe going across the front of the car and rev the engine.
dont know if my cars standard one was dodgy but it almost sucked its self shut.. well not quiet but it deffinatly restricted air flow as it couldnt stand up to the vacume of the motor.
as far as im concerned when it comes to air filters bigger is better its the pipe length and Dia which may not be bigger is better but as for filtering the larger the filter the less the restriction will be.
next hot day... today even or after a little bit of enthusiastic driving pop the bonnet put your hand on the intake pipe going across the front of the car and rev the engine.
dont know if my cars standard one was dodgy but it almost sucked its self shut.. well not quiet but it deffinatly restricted air flow as it couldnt stand up to the vacume of the motor.
as far as im concerned when it comes to air filters bigger is better its the pipe length and Dia which may not be bigger is better but as for filtering the larger the filter the less the restriction will be.
- CheyneX5
- Racing Driver
- Posts: 1776
- Joined: Sun May 18, 2008 8:38 pm
- Vehicle: NA6
- Location: Melbourne, Victoria, Australia
- Contact:
MX5 Factory CAI setup (with pics) 56k warning
you mean like this?
90' NA6 - Classic Red
09' Skoda Octavia vRS TSi Wagon - Race Blue
09' Skoda Octavia vRS TSi Wagon - Race Blue
-
- Speed Racer
- Posts: 11854
- Joined: Mon Aug 08, 2005 11:35 pm
- Vehicle: Clubman
- Location: Melbourne
MX5 Factory CAI setup (with pics) 56k warning
irwin83r wrote:the big thing id look at chaing is the pipe going across the front of the motor.
next hot day... today even or after a little bit of enthusiastic driving pop the bonnet put your hand on the intake pipe going across the front of the car and rev the engine.
dont know if my cars standard one was dodgy but it almost sucked its self shut.. well not quiet but it deffinatly restricted air flow as it couldnt stand up to the vacume of the motor.
as far as im concerned when it comes to air filters bigger is better its the pipe length and Dia which may not be bigger is better but as for filtering the larger the filter the less the restriction will be.
Must check as I've got an NB8 cross pipe which is more pliable than the NA8 cross pipe.
- green_comet
- Car Detailing Guru
- Posts: 1848
- Joined: Tue May 24, 2005 1:41 am
- Vehicle: NA8
- Location: Melbourne
MX5 Factory CAI setup (with pics) 56k warning
Nice writeup, not the greatest looking, or cheapest thing in the world, but if your happy thats all that matters..
ummmm...
meanmx wrote:It has definately improved since the early days when it looked like an empty paint can with a hose coming out.
ummmm...
- AJ
- Speed Racer
- Posts: 4349
- Joined: Sun Oct 30, 2005 8:27 pm
- Vehicle: NC
- Location: Gold Coast
MX5 Factory CAI setup (with pics) 56k warning
Don't worry about what people think, they don't do it very often
XMX5 Rogues
-
- Racing Driver
- Posts: 1692
- Joined: Thu Apr 06, 2006 7:48 pm
- Vehicle: NA6
- Location: Sydney
- Contact:
MX5 Factory CAI setup (with pics) 56k warning
green_comet wrote:Nice writeup, not the greatest looking, or cheapest thing in the world, but if your happy thats all that matters..meanmx wrote:It has definately improved since the early days when it looked like an empty paint can with a hose coming out.
ummmm...
ROFL!
all yours for $500
http://Run-It-Hard.com - We're here to have fun!
- SuperMazdaKart
- Racing Driver
- Posts: 1980
- Joined: Tue Oct 26, 2004 9:10 pm
- Vehicle: ND - 2 GT
- Location: Adelaide
MX5 Factory CAI setup (with pics) 56k warning
is that the one that comes with a whole tin of jellybeans as well?
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 8 guests