Mundi's Haggard NA6 project
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
- SuperMazdaKart
- Racing Driver
- Posts: 1980
- Joined: Tue Oct 26, 2004 9:10 pm
- Vehicle: ND - 2 GT
- Location: Adelaide
Mundi's Haggard NA6 project
SuperMazdaKart wrote:wheres the engine coming from? someone at fordlaser.com?
Was going to (but I got confused and tried a face-saving exit), the engine was a B6 8 valve SOHC, I somehow managed to assumed it was a 16 valve turbo , I'm such a bloody idiot. I'm still looking for a gasket set, been sending emails and getting none back, so if anyone can give me some pointers....
Also looking for low-compression pistons.
Mundi's Haggard NA6 project
Update: Removed and straightened steering rack, removed radiator, drained tank and relieved fuel pressure, disconnected the clutch and shifter, removed exhaust, removed intake, disconnected starter, ignition etc. and pulled out the engine and gearbox.
A very tedious process, thanks Claire for helping.
A very tedious process, thanks Claire for helping.
You do not have the required permissions to view the files attached to this post.
Mundi's Haggard NA6 project
You're welcome, see I'm not always a complete pain in the arse!!
- Administrator
- Site Admin
- Posts: 323
- Joined: Fri Aug 29, 2003 2:55 pm
- Vehicle: ND - 2 GT
- Location: Melbourne
- Contact:
Mundi's Haggard NA6 project
Anyway here is a quick update:
I put a coat of black on the body (still rough) and degreased the engine and gearbox (note absence of clutch and flywheel).
Did some work on the bonnet but didn't want to post up pictures taken with my phone, as you can tell the quality is less that great.
You do not have the required permissions to view the files attached to this post.
Mundi's Haggard NA6 project
Update:
Some more airbrushing with a little more detail, camera flash makes a mess of the shots but otherwise it's blurry as all hell.
Some more airbrushing with a little more detail, camera flash makes a mess of the shots but otherwise it's blurry as all hell.
You do not have the required permissions to view the files attached to this post.
- SuperMazdaKart
- Racing Driver
- Posts: 1980
- Joined: Tue Oct 26, 2004 9:10 pm
- Vehicle: ND - 2 GT
- Location: Adelaide
Mundi's Haggard NA6 project
SuperMazdaKart wrote:could get OKAMI rego plates when it's all done maybe
Another fan of theme cars!
Update: Bonnet finished. Lots of stuff getting stuck in the clear, most of the problems resolved and I'm reasonably happy with the final product.
You do not have the required permissions to view the files attached to this post.
Mundi's Haggard NA6 project
That looks really good Mundi! Maybe you could do one on the inside of my bonnet?!!
- SuperMazdaKart
- Racing Driver
- Posts: 1980
- Joined: Tue Oct 26, 2004 9:10 pm
- Vehicle: ND - 2 GT
- Location: Adelaide
Mundi's Haggard NA6 project
Claire wrote:That looks really good Mundi! Maybe you could do one on the inside of my bonnet?!!
I gather he'll be the only one who gets to see that
er ahem..
Mundi wrote:Another fan of theme cars!
well, it was me who had the MarioKart MX-5 after all..
http://www.mx5cartalk.com/phpBB-3.0.2/garage_vehicle.php?mode=view_vehicle&VID=48
Mundi's Haggard NA6 project
SuperMazdaKart wrote:well, it was me who had the MarioKart MX-5 after all..
Ahh, the original SA Mx5 themer then!
My car will be on display outside the Top of the Torrens Art Gallery (in Birdwood) on the 14th of November, everyone is welcome to come and check it out.
Mundi's Haggard NA6 project
Well, it's been awhile, I left the project to rot in my shed due to the pain of organising a new shed, building a decent booth (still not completed) and lack of funds.
But here is the long and short of the last few months:
I ripped the engine apart for inspection and found dirty great hole in the block, so I decided to change plans. Seeing as I have a V8 for a daily and enjoy the noise (ƒü¢k the torque, noise is the thing a V8 does best), I have decided to go the 1uzfe route. This of course means stripping the engine-bay, bracing the chassis, replacing the differential - but I have plenty of time.
At present the Mx5 is on the lawn, stripped as far down as possible and waiting for me to build a rotisserie so as to weld a brace for the mid-section and remove the rust ( ) from the rear of the car.
But here is the long and short of the last few months:
I ripped the engine apart for inspection and found dirty great hole in the block, so I decided to change plans. Seeing as I have a V8 for a daily and enjoy the noise (ƒü¢k the torque, noise is the thing a V8 does best), I have decided to go the 1uzfe route. This of course means stripping the engine-bay, bracing the chassis, replacing the differential - but I have plenty of time.
At present the Mx5 is on the lawn, stripped as far down as possible and waiting for me to build a rotisserie so as to weld a brace for the mid-section and remove the rust ( ) from the rear of the car.
Who is online
Users browsing this forum: No registered users and 291 guests