Power window squeal

Body, Paint, Interior and Trim questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

blue_na
Fast Driver
Posts: 103
Joined: Fri Sep 19, 2008 12:39 pm
Vehicle: NA6
Location: Melbourne, VIC

Power window squeal

Postby blue_na » Fri Nov 21, 2008 2:43 pm

When winding the LHS power window up or down, at about the bottom half it struggles, slows down and makes a squealing noise like its rubbing against the seals?

What's the best way to fix this? I could always just cover the whole window in WD-40... :shock: :lol:
The emotion of motion... Zoom-Zoom!

wun911
Speed Racer
Posts: 2114
Joined: Tue Sep 11, 2007 12:13 pm
Vehicle: ND - 2 GT
Location: Melbourne

Power window squeal

Postby wun911 » Fri Nov 21, 2008 3:36 pm

I think its just lithium grease into the rails that hold the window in place. You just have to take the door trim off.
every ounce counts

User avatar
sliq
Speed Racer
Posts: 3414
Joined: Sat Jan 13, 2007 12:33 am
Vehicle: ND - 2 GT
Location: Sydney
Contact:

Power window squeal

Postby sliq » Fri Nov 21, 2008 3:39 pm

wun911 wrote:I think its just lithium grease into the rails that hold the window in place. You just have to take the door trim off.


yup.

common mx5 problem.

u can get a spray can with the tube thingy that goes on the end of the tip from the hardware store. $17 or so.
i can't brain today.. i have the dumb..

User avatar
Okibi
Speed Racer
Posts: 10901
Joined: Thu Aug 21, 2003 11:00 am
Vehicle: NB SE
Location: Perth, Western Australia
Contact:

Power window squeal

Postby Okibi » Fri Nov 21, 2008 4:06 pm

Might also be worth putting chain lube on the cable, that extra friction might be stressing everything else.
If you had access to a car like this, would you take it back right away? Neither would I.

blue_na
Fast Driver
Posts: 103
Joined: Fri Sep 19, 2008 12:39 pm
Vehicle: NA6
Location: Melbourne, VIC

Power window squeal

Postby blue_na » Fri Nov 21, 2008 4:29 pm

Thanks guys, quick response & easy solution :mrgreen:
The emotion of motion... Zoom-Zoom!

wun911
Speed Racer
Posts: 2114
Joined: Tue Sep 11, 2007 12:13 pm
Vehicle: ND - 2 GT
Location: Melbourne

Power window squeal

Postby wun911 » Fri Nov 21, 2008 4:30 pm

http://www.mx5parts.co.uk/product_info. ... cts_id/227

In my window this thing is cracked, so when the roof is down and windows up on bumpy road windows kinda rattle a bit. Its also squeeky when window goes up and down sometimes, with or without the grease...

Need to find this thing but for NB8Bs....
every ounce counts

User avatar
bensale
Racing Driver
Posts: 1984
Joined: Tue Sep 11, 2007 7:38 pm
Vehicle: NA6
Location: Melbourne Australia
Contact:

Power window squeal

Postby bensale » Fri Nov 21, 2008 8:53 pm

I'll be giving the grease a go, I have exactly the same problem. I got a little bit of relief through cleaning out the guide tracks but i'll give this a go next.
www.othersideproductions.com
NA6-Phillip Island 1:57.7, Winton 1:42.9, Winton Short 1:12.4, Sandown 1:35.2, Wakefield 1.15.9, Nurburgring 9:17.0

Fatty
Speed Racer
Posts: 3175
Joined: Fri Feb 03, 2006 10:39 am
Vehicle: NA6
Location: Melbourne

Power window squeal

Postby Fatty » Fri Nov 21, 2008 9:10 pm

what are these "power" windows that you guys are talking about ? :? :?

Image

User avatar
bensale
Racing Driver
Posts: 1984
Joined: Tue Sep 11, 2007 7:38 pm
Vehicle: NA6
Location: Melbourne Australia
Contact:

Power window squeal

Postby bensale » Fri Nov 21, 2008 9:28 pm

Actually I wish we had manual windows and power mirrors rather than the other way around. You fitted the winders yourself didn't you?
www.othersideproductions.com
NA6-Phillip Island 1:57.7, Winton 1:42.9, Winton Short 1:12.4, Sandown 1:35.2, Wakefield 1.15.9, Nurburgring 9:17.0

Fatty
Speed Racer
Posts: 3175
Joined: Fri Feb 03, 2006 10:39 am
Vehicle: NA6
Location: Melbourne

Power window squeal

Postby Fatty » Fri Nov 21, 2008 9:30 pm

yep.

blue_na
Fast Driver
Posts: 103
Joined: Fri Sep 19, 2008 12:39 pm
Vehicle: NA6
Location: Melbourne, VIC

Power window squeal

Postby blue_na » Fri Nov 21, 2008 11:10 pm

bensale wrote:Actually I wish we had manual windows and power mirrors rather than the other way around. You fitted the winders yourself didn't you?


Agreed. Almost every day I turn the ignition off, remove the key and then go to open the door, only to realise my window is still down :x
That manual winder seems like a worthwhile mod! :D
The emotion of motion... Zoom-Zoom!

prince of liteness

Power window squeal

Postby prince of liteness » Fri Nov 21, 2008 11:40 pm

Ive seen remote for the window... so can put the roof on walk away and windows go up via remote...

User avatar
sliq
Speed Racer
Posts: 3414
Joined: Sat Jan 13, 2007 12:33 am
Vehicle: ND - 2 GT
Location: Sydney
Contact:

Power window squeal

Postby sliq » Tue Dec 02, 2008 4:38 pm

i tried putting grease in the rails today. but to no avail.

after ripping off the door trim, it was pretty hard to find where the rails were because of the clear plastic sheet.

did anyone actually rip this sheet off to get to the rails?

does anyone have photos of how they accessed the rails? :cry:
i can't brain today.. i have the dumb..

Fatty
Speed Racer
Posts: 3175
Joined: Fri Feb 03, 2006 10:39 am
Vehicle: NA6
Location: Melbourne

Power window squeal

Postby Fatty » Tue Dec 02, 2008 4:40 pm

you need to pull the sheet off... it has this sticky black goop on it, so you can sort of just puch it back into place when you're done and it should re-attach itself. )well, on an NA, anyway)

once you have the sheet off you should be able to see the rails more clearly.

User avatar
sliq
Speed Racer
Posts: 3414
Joined: Sat Jan 13, 2007 12:33 am
Vehicle: ND - 2 GT
Location: Sydney
Contact:

Power window squeal

Postby sliq » Tue Dec 02, 2008 4:45 pm

Fatty wrote:you need to pull the sheet off... it has this sticky black goop on it, so you can sort of just puch it back into place when you're done and it should re-attach itself. )well, on an NA, anyway)

once you have the sheet off you should be able to see the rails more clearly.


ahh yes, that black sticky goo.. it looked like venom from spiderman 3.
i can't brain today.. i have the dumb..


Return to “MX5 Body, Paint, Interior & Trim”

Who is online

Users browsing this forum: No registered users and 32 guests