The 'Dodgy Mod' List..

Body, Paint, Interior and Trim questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

wun911
Speed Racer
Posts: 2114
Joined: Tue Sep 11, 2007 12:13 pm
Vehicle: ND - 2 GT
Location: Melbourne

The 'Dodgy Mod' List..

Postby wun911 » Mon Nov 10, 2008 6:38 pm

the nozzles!
every ounce counts

User avatar
feel_ixx
Fast Driver
Posts: 404
Joined: Mon Aug 18, 2008 7:02 pm
Vehicle: NA6
Location: Sydney

The 'Dodgy Mod' List..

Postby feel_ixx » Wed Nov 12, 2008 1:40 am

LMW wrote:Based on similar suggestions re using common garden products to create your own front lip. I got 100mm garden edging which is a very stiff plastic and trimmed it to 75mm and made my own clips to hold it on. Looks good and seems rigid enough. hardest part of job was that Bunnings only had green and not black in stock, so had to spray paint matt black. If not required to paint the whole job would have only taken an hour and cost $25 for 5 metres of the product.


Hey LMW, I just had a question about that front lip you were talking about. How did you make those clips to put the edging on? I actually bought PVC linear plastic which is a little more bendable but i'm having a hard time getting it on properly. If that fails, I may end up with garden edging like you did, it comes in black now.
- Felix

LMW

The 'Dodgy Mod' List..

Postby LMW » Wed Nov 12, 2008 3:57 pm

Felix,
I just got some right angle pieces from Bunnings about 15mm each side, pop riveted them to the bottom of the valance and then screwed the edge trim onto that. Just drove from Canberra to Sydney at 110km and no movement.

Lindsay

User avatar
crzymx
Fast Driver
Posts: 414
Joined: Wed Nov 05, 2008 11:43 pm
Vehicle: ND - 2 GT
Location: Melbourne

The 'Dodgy Mod' List..

Postby crzymx » Wed Nov 12, 2008 5:54 pm

Anyon made eyelids?
DIY is the new black!

grump
Fast Driver
Posts: 294
Joined: Mon Sep 01, 2008 1:33 pm
Vehicle: ND - 2 GT
Location: Brisbane bayside

The 'Dodgy Mod' List..

Postby grump » Wed Nov 12, 2008 8:21 pm

the best way to make eyelids is to take 6mm fineline tape, mask out the perimiter of the lights to the shape you want and then use black mascarra to blacken them in , it works for my wife
Bond, James Bond. growing old is not an option, growing up is

User avatar
crzymx
Fast Driver
Posts: 414
Joined: Wed Nov 05, 2008 11:43 pm
Vehicle: ND - 2 GT
Location: Melbourne

The 'Dodgy Mod' List..

Postby crzymx » Wed Nov 12, 2008 10:49 pm

As in colouring the tape? yeah but that wouldnt look glossy would it?
DIY is the new black!

Blue94t
Racing Driver
Posts: 555
Joined: Tue Oct 24, 2006 3:41 pm
Vehicle: ND - 2 GT
Location: Melbourne

The 'Dodgy Mod' List..

Postby Blue94t » Thu Nov 13, 2008 8:30 am

Yakob/crzymx or whatever you are calling yourself this week,
grump is taking the piss.
though I would like to see you try to make headlight eyelids with mascarra
I believe you can pick it up at your local chemist, maybe even the supermarket. Ask FastFreddyGassit, I am sure he knows the best place to get quality mascarra cheap. I know he uses it on his drag racing nights.
Jake

User avatar
mx52nv
Purple Porsche Eater
Posts: 1345
Joined: Tue Sep 20, 2005 5:13 am
Vehicle: Non MX-5
Location: Perth

The 'Dodgy Mod' List..

Postby mx52nv » Thu Nov 13, 2008 10:40 am

Blue94t wrote:Yakob/crzymx or whatever you are calling yourself this week...

Am I the only one that has just realised that crzymx is yakob?

Sorry, not my intention to hijack the thread :oops:
Normal service may resume - apologies again.

wun911
Speed Racer
Posts: 2114
Joined: Tue Sep 11, 2007 12:13 pm
Vehicle: ND - 2 GT
Location: Melbourne

The 'Dodgy Mod' List..

Postby wun911 » Thu Nov 13, 2008 1:28 pm

crzymx is yakob? Is this true?

Hey stu I want a new forum name "prince of liteness"
every ounce counts

User avatar
mx52nv
Purple Porsche Eater
Posts: 1345
Joined: Tue Sep 20, 2005 5:13 am
Vehicle: Non MX-5
Location: Perth

The 'Dodgy Mod' List..

Postby mx52nv » Thu Nov 13, 2008 1:31 pm

wun911 wrote:crzymx is yakob? Is this true?

Hey stu I want a new forum name "prince of liteness"

:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: You are killing me here wun... :lol: :lol: :lol: :lol:

Ok ok enough with the thread hijacking - seriously :oops:

prince of liteness

The 'Dodgy Mod' List..

Postby prince of liteness » Thu Nov 13, 2008 5:28 pm

Ok back on topic...

What are eye lids and how much do they weigh?

RG.net
Racing Driver
Posts: 1692
Joined: Thu Apr 06, 2006 7:48 pm
Vehicle: NA6
Location: Sydney
Contact:

The 'Dodgy Mod' List..

Postby RG.net » Thu Nov 13, 2008 5:35 pm

prince of liteness wrote:Ok back on topic...

What are eye lids and how much do they weigh?


oh what the F**k?!?!?!

what is with your name wun :lol:

eyelids = weight adding
http://Run-It-Hard.com - We're here to have fun!

Fatty
Speed Racer
Posts: 3175
Joined: Fri Feb 03, 2006 10:39 am
Vehicle: NA6
Location: Melbourne

The 'Dodgy Mod' List..

Postby Fatty » Thu Nov 13, 2008 6:07 pm

love the sig line.. "every picogram..." :lol: :lol: :lol: :lol:

User avatar
fastfreddygassit
Waitin' for a mate
Posts: 1773
Joined: Sat Jun 25, 2005 8:00 pm
Vehicle: NB SE
Location: Waitin' for a mate in Melbourne somewhere
Contact:

The 'Dodgy Mod' List..

Postby fastfreddygassit » Thu Nov 13, 2008 6:09 pm

prince of liteness wrote:Ok back on topic...

What are eye lids and how much do they weigh?

eyelids...
Image

They weigh sweet-flower-all

and excuse Jake everyone.
He is just grumpy 'cos his 220+rwkw clubman ain't going to be ready this year.
and he's not getting any sex either......
no car+no sex=grumpy Jakey :mrgreen: :mrgreen:

(you want to start me about mascara? bring it on freshly married {and getting nothing} boy)
ps. mascara is single C and single S and single R. :oops:

CJ5

The 'Dodgy Mod' List..

Postby CJ5 » Thu Nov 13, 2008 6:23 pm

:shock: too much information


Return to “MX5 Body, Paint, Interior & Trim”

Who is online

Users browsing this forum: No registered users and 260 guests