Seats
Moderators: timk, Stu, zombie, Andrew, -alex, miata
- philz
- Wheel guru
- Posts: 1297
- Joined: Wed Jun 04, 2008 4:32 pm
- Vehicle: ND - 2 GT
- Location: Sydney
Seats
Alternative pm rupewrecht who just posted before you or go to here..
http://www.astinagt.com/forums/forumdisplay.php?f=43
http://www.astinagt.com/forums/forumdisplay.php?f=43
- marcusus
- Speed Racer
- Posts: 2919
- Joined: Thu Jul 13, 2006 12:07 am
- Vehicle: NB8A
Seats
rupewrecht wrote:will you now?
Well I was, but since you've read the post, I don't need to. You should now do it of your own accord
rupewrecht wrote:They're MS Sports, not Type-Fs. The Type-Fs are the single color suede ones (unless they're the RX-8 version in black/grey mesh).
Close enough. Thing is, if the current trim is in rather crap nick, I can wait it out a bit and get them retrimmed the way I've been semi discussing in this thread. But from the looks of the photos they should be pretty reasonable, so hopefully that's the case.
rupewrecht wrote:And i don't think counterfeits even exist - there isn't enough of a demand for the originals to warrant someone copying them.
Probably a good thing. Means I'm not getting cheap knock offs
- ASE05
- Racing Driver
- Posts: 741
- Joined: Fri Jun 10, 2005 11:35 pm
- Vehicle: NB SE
- Location: Not from 'round these parts...
- Contact:
Seats
Grrrrrr, hopin' someone can point me in the direction of the pics showing NB OEM rails that were modified to suit the Sparco Sprint V? I just bought one this arvie and thought the pics were in this thread but alas.......
Or if anyone can tell me which end of the rails needs to be drilled?
EDIT: Doh, just saw the thread I was chasing a few threads down
Or if anyone can tell me which end of the rails needs to be drilled?
EDIT: Doh, just saw the thread I was chasing a few threads down
Last edited by ASE05 on Wed Sep 17, 2008 8:16 pm, edited 2 times in total.
Sing that song, puff all night long.......
-
- Racing Driver
- Posts: 1692
- Joined: Thu Apr 06, 2006 7:48 pm
- Vehicle: NA6
- Location: Sydney
- Contact:
Seats
ASE05 wrote:Grrrrrr, hopin' someone can point me in the direction of the pics showing NB OEM rails that were modified to suit the Sparco Sprint V? I just bought one this arvie and thought the pics were in this thread but alas.......
Or if anyone can tell me which end of the rails needs to be drilled?
you need to do some searching next time
viewtopic.php?f=28&t=32692
http://Run-It-Hard.com - We're here to have fun!
-
- Racing Driver
- Posts: 1692
- Joined: Thu Apr 06, 2006 7:48 pm
- Vehicle: NA6
- Location: Sydney
- Contact:
Seats
yeah the search function isnt the best on this forum (far from it). was on the first page though enjoy.
http://Run-It-Hard.com - We're here to have fun!
- marcusus
- Speed Racer
- Posts: 2919
- Joined: Thu Jul 13, 2006 12:07 am
- Vehicle: NB8A
Seats
zz00me wrote:Hey marcusus did you end up getting some new seats?
If so what did you get etc.
Peter
Hey Peter,
Yes, I did get seats, however I am yet to collect them. They've arrived in the country, but they're in Melbourne. I'm going down there at the end of November, so I figured I can wait a little bit longer and save on delivery by getting them myself.
I ended up getting a set of the Mazda Sports seats which have that gradient pattern in the middle with black surrounds. Once I've actually got them and have them installed on the car, pics will be coming up. They won't be in until the start of December though.
- orx626
- Forum sponsor
- Posts: 1774
- Joined: Thu Sep 23, 2004 8:26 am
- Vehicle: NC - Rotary
- Location: Brisbane - Northside
- Contact:
Seats
marcusus wrote:I ended up getting a set of the Mazda Sports seats which have that gradient pattern in the middle with black surrounds. Once I've actually got them and have them installed on the car, pics will be coming up. They won't be in until the start of December though.
Are they this style Marcusus?
Cheers,
Danny
- rupewrecht
- Forum sponsor
- Posts: 12
- Joined: Thu Oct 11, 2007 11:18 am
- Vehicle: ND - Supercharged
- Location: Melbourne
- Contact:
Seats
i do have a name, you know
jdmparts.rupewrecht.com
Sourcing your not quite overnight parts from Japan
Sourcing your not quite overnight parts from Japan
- orx626
- Forum sponsor
- Posts: 1774
- Joined: Thu Sep 23, 2004 8:26 am
- Vehicle: NC - Rotary
- Location: Brisbane - Northside
- Contact:
- marcusus
- Speed Racer
- Posts: 2919
- Joined: Thu Jul 13, 2006 12:07 am
- Vehicle: NB8A
Seats
rupewrecht wrote:i do have a name, you know
Forum Lurker?
If you posted more regularly, I'd use your name, but then it removes that air of mystique as well. I suppose I should've realised you'd be watching this thread considering what happened last time
Danny, nice one
Return to “MX5 Body, Paint, Interior & Trim”
Who is online
Users browsing this forum: No registered users and 277 guests