Has anyone used the tomei limited slip diff centres?
Just curious... found some cheap (well used to be when our dollar was up against the greenback).
Wanted to know how they stack up against the usual suspects Kaaz, std torsen etc..
Tomei lsds
Moderators: timk, Stu, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy, zombie, Andrew, The American, Lokiel
- colster3
- Fast Driver
- Posts: 327
- Joined: Mon Nov 22, 2004 1:34 pm
- Vehicle: NB8A
Tomei lsds
"yes yes yes! I know what I'm doing! Just leave me alone...
-
- Racing Driver
- Posts: 664
- Joined: Sun Jul 10, 2005 6:08 pm
- Vehicle: NC
- Location: Sydney
- Contact:
Tomei lsds
we reviewed one in a 350Z and it was excellent.
actually, we have been running one in our drift car for 2 years.
flawless performance.
a lot tighter than a kaaz.
actually, we have been running one in our drift car for 2 years.
flawless performance.
a lot tighter than a kaaz.
- irwin83r
- Racing Driver
- Posts: 1563
- Joined: Wed Feb 25, 2004 8:32 pm
- Vehicle: NB8A
- Location: wollongong
- Contact:
Tomei lsds
mine clunked/chirped the inside wheel in carparks at first but changed oil and now its pretty good.. still clunks a little.
other than that... love it
other than that... love it
- Hellmun
- Racing Driver
- Posts: 979
- Joined: Sat Feb 10, 2007 1:15 pm
- Vehicle: NB8B - Turbo
- Location: Wollongong,NSW
Tomei lsds
With the Royal Purple Max gear mine still chirps like crazy. They're very tight...I love mine as well.
- colster3
- Fast Driver
- Posts: 327
- Joined: Mon Nov 22, 2004 1:34 pm
- Vehicle: NB8A
Tomei lsds
Thanks guys
Looks like it might be the go! By the way, even the standard lsd in my road car (NCLE
) causes a protest from the tyres on tight lock - especially when cold 

Looks like it might be the go! By the way, even the standard lsd in my road car (NCLE


"yes yes yes! I know what I'm doing! Just leave me alone...
- irwin83r
- Racing Driver
- Posts: 1563
- Joined: Wed Feb 25, 2004 8:32 pm
- Vehicle: NB8A
- Location: wollongong
- Contact:
Tomei lsds
wont worry you then
just make sure you get the backlash and mesh set properly when you install it, dont just chuck the new bits in and go do some drifting

just make sure you get the backlash and mesh set properly when you install it, dont just chuck the new bits in and go do some drifting
-
- Fast Driver
- Posts: 311
- Joined: Thu Jul 29, 2004 5:20 pm
- Vehicle: ND - 2 GT
- Location: Brisbane
Tomei lsds
colster3 wrote:Thanks guys![]()
Looks like it might be the go! By the way, even the standard lsd in my road car (NCLE) causes a protest from the tyres on tight lock - especially when cold
How much can you get them for and where as I may also be interested in buying one.
Neil
SP Race Car
RS Clio
ML 300
RS Clio
ML 300
-
- Driver
- Posts: 63
- Joined: Sat Apr 26, 2003 11:00 am
- Vehicle: NA8
- Location: Sydney
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 1 guest