Horrible squeaking on ignition

Engines, Transmissions & Final Drive questions and answers

Moderators: timk, Stu, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy, zombie, Andrew, The American, Lokiel

Post Reply
User avatar
Garry
Speed Racer
Posts: 3481
Joined: Sun Apr 27, 2003 11:00 am
Vehicle: NB SP
Location: God's Country
Contact:
Contact Garry

Horrible squeaking on ignition

Postby Garry » Mon Sep 29, 2008 9:41 am

Have you checked the tension on the alternator/power steering belts? That'd be where I'd start first.
Shiney black one with added red bits. Member of the fart club. Now with extra doof and Sunlong. - deceased and gone to heaven
Top
User avatar
RawSouth
Fast Driver
Posts: 475
Joined: Sun May 04, 2008 10:47 pm
Vehicle: NB8B
Location: Sydney
Contact:
Contact RawSouth

Horrible squeaking on ignition

Postby RawSouth » Mon Sep 29, 2008 10:27 am

It could also possibly be your thrust bearing...
ロードスター
Top
User avatar
Steampunk
Speed Racer
Posts: 4670
Joined: Wed Oct 10, 2007 9:16 am
Vehicle: NA6
Location: Southside of Breeze-bane

Horrible squeaking on ignition

Postby Steampunk » Mon Sep 29, 2008 12:11 pm

Garry wrote:Have you checked the tension on the alternator/power steering belts? That'd be where I'd start first.


x2
Image
Top
User avatar
Garry
Speed Racer
Posts: 3481
Joined: Sun Apr 27, 2003 11:00 am
Vehicle: NB SP
Location: God's Country
Contact:
Contact Garry

Horrible squeaking on ignition

Postby Garry » Tue Sep 30, 2008 9:46 am

My money is on the alternator belt. You just need to loosen the locking bolt, turn the adjusting bolt a few turns to put a bit more tension on the belt and then retighten the locking bolt. Should take all of about 5 minutes. From memory you'll only need a 12mm spanner to do it and no need to get under the car. If it is the belt the longer you leave it the worse it gets as it will eventually polish the belt and it wont be able to transmit the power. The only way to fix it then is to replace the belt which is a lot more complex than tightening it up.
Shiney black one with added red bits. Member of the fart club. Now with extra doof and Sunlong. - deceased and gone to heaven
Top
matt9111
Fast Driver
Posts: 198
Joined: Mon Jun 23, 2008 9:56 am
Vehicle: NB8B
Location: Melbourne

Horrible squeaking on ignition

Postby matt9111 » Tue Sep 30, 2008 7:01 pm

x2 on thrust bearing
Great looking 02 BLACK NB8B, Tein S Tech Coils, Whiteline Adjustable Sways F&R, Carbing Alloy Rear Strut Brace ;)
Top
User avatar
Locutus
Racing Driver
Posts: 879
Joined: Thu Jul 26, 2007 7:39 pm
Vehicle: NB SP
Location: Sydney
Contact:
Contact Locutus

Horrible squeaking on ignition

Postby Locutus » Sat Oct 04, 2008 10:24 am

solo22 wrote:the alternator was kicking in about 5 seconds after ignition to recharge battery

that doesn't sound right... i'm guessing you had the A/C on? there's a delay on the A/C after ignition.
Top
Post Reply

Return to “MX5 Engines, Transmission & Final Drive”

Who is online

Users browsing this forum: No registered users and 4 guests