tyres for 15x8's - NOW WITH PICS

[JSE]

how much does it generally cost to get guards rolled?

[marvis]

~$25 a corner i am led to believe.

or free - http://www.youtube.com/watch?v=DDTK9IjKIYU

[Sasso]

Everyone talks about pulling the guard, I know rolling is just folding the lip up so you gain more width, and I assume pulling means actually bending the fender out to fit an even wider wheel/tyre after rolling. But how do you actually pull the fender? is it the same tool as the roller or is it just using a pole like on youtube?

[Adam_NAclubman]

I used the guard roller I bought, you just keep doing it and winding the arm out

[Sasso]

I used the guard roller I bought, you just keep doing it and winding the arm out

So the force to push the fender out is easily achieved with just the roller and you pushing it back and forward?

How much was that roller and where did you get it?

thanks

[Adam_NAclubman]

Theres usually a few on ebay.

The front guards are realllllllly easy to reshape. Rears are a bit of a pain, the metal is much thicker

[284GCZ]

+0 ....flares?? dunno how they'll look on an nb..anyway, i've got +15s on the na6 with 195/50/15's and lipping and 20 mm of pull needs to be done.. will be sweet if you get +0's to fit- the track at the front will look pretty psyco.. mine looks friggin nuts as it is. the car looks like its gassed up on roids. lol- good luck bro- let me know how it goes- L

[FMS01]

+0 ....flares?? dunno how they'll look on an nb..anyway, i've got +15s on the na6 with 195/50/15's and lipping and 20 mm of pull needs to be done.. will be sweet if you get +0's to fit- the track at the front will look pretty psyco.. mine looks friggin nuts as it is. the car looks like its gassed up on roids. lol- good luck bro- let me know how it goes- L

Got any photo's?

[marvis]

^ example of 15x8 +0 195 50. Best fitment, this is what i would get on a NA.

[284GCZ]

bet you that red na's rims are only 7inch wide- +0's 8inchers hang out like dogs balls. have some pics coming of my na shortly..

[marvis]

They are 8's. And they do hang out.

Another 15x8 0 offset.

[FMS01]

that guys carcomain page is http://www.cardomain.com/ride/2574658

these though are 15x7's 0 offset, guards rolled, not pulled.


Cheers,
Julian

[16bit]

wheels have just arrived - will post pics over the weekend.

[FMS01]

You're running out of time 16bit. PICS OR BAN!

[16bit]

all will be told early this week - I am booking in this morning.