SE injector resistance?
Moderators: timk, Stu, zombie, Andrew, -alex, miata
- ASE05
- Racing Driver
- Posts: 741
- Joined: Fri Jun 10, 2005 11:35 pm
- Vehicle: NB SE
- Location: Not from 'round these parts...
- Contact:
- ASE05
- Racing Driver
- Posts: 741
- Joined: Fri Jun 10, 2005 11:35 pm
- Vehicle: NB SE
- Location: Not from 'round these parts...
- Contact:
SE injector resistance?
I'm lookin' to get these:12/16 ohms
http://cgi.ebay.com/ebaymotors/RC-Fuel-Injectors-Mazda-Miata-1-6-MX-5-1-8-440cc-440-cc_W0QQcmdZViewItemQQ_trksidZp1638Q2em122QQcategoryZ33554QQihZ023QQitemZ360082114243QQrdZ1QQsspagenameZWD2V
http://cgi.ebay.com/ebaymotors/RC-Fuel-Injectors-Mazda-Miata-1-6-MX-5-1-8-440cc-440-cc_W0QQcmdZViewItemQQ_trksidZp1638Q2em122QQcategoryZ33554QQihZ023QQitemZ360082114243QQrdZ1QQsspagenameZWD2V
Sing that song, puff all night long.......
-
- Speed Racer
- Posts: 3175
- Joined: Fri Feb 03, 2006 10:39 am
- Vehicle: NA6
- Location: Melbourne
SE injector resistance?
there are basically 2 sorts of injectors: high ohm and low ohm. afaik mx5's (i can't see why the SE would be any different) use high ohm injectors.
these are high ohm, so should work fine. if you can get them to idle, that is.... 440cc is pretty big, altho i'm managing to get me 460's to idle ok (sort of) .
these are high ohm, so should work fine. if you can get them to idle, that is.... 440cc is pretty big, altho i'm managing to get me 460's to idle ok (sort of) .
-
- Racing Driver
- Posts: 1751
- Joined: Sun Apr 27, 2003 11:00 am
- Vehicle: ND - 2 GT
- Location: Bayside - Melbourne
- Contact:
SE injector resistance?
How are you planning to control the fuel when you install the larger injectors? I ask because this may constrain the type of injector you use.
J
J
Former owner of Mailbu Stacey, Smurfette and Tweety.
- ASE05
- Racing Driver
- Posts: 741
- Joined: Fri Jun 10, 2005 11:35 pm
- Vehicle: NB SE
- Location: Not from 'round these parts...
- Contact:
SE injector resistance?
I've got a piggyback EXEDE attached, 440cc is AOK
Sing that song, puff all night long.......
- PASHN8
- Racing Driver
- Posts: 648
- Joined: Thu Jun 02, 2005 11:28 am
- Vehicle: NB SE
- Location: Melbourne
- Contact:
SE injector resistance?
Which 440's did you end up going ASE? Are they are drop in/PnP?
- 2005 MX-5 SE
http://www.dinography.com.au - From the ground
http://www.skysight.com.au - From the air
http://www.dinography.com.au - From the ground
http://www.skysight.com.au - From the air
- ASE05
- Racing Driver
- Posts: 741
- Joined: Fri Jun 10, 2005 11:35 pm
- Vehicle: NB SE
- Location: Not from 'round these parts...
- Contact:
SE injector resistance?
^^^^ went with the RC 440cc injectors with clips. Not PnP but aint hard to fit either.
Pity I can't get her in for the tune B4 the next track day but waddaya do.....
Pity I can't get her in for the tune B4 the next track day but waddaya do.....
Sing that song, puff all night long.......
- PASHN8
- Racing Driver
- Posts: 648
- Joined: Thu Jun 02, 2005 11:28 am
- Vehicle: NB SE
- Location: Melbourne
- Contact:
SE injector resistance?
Sweet, idles ok etc? No problems compatibility wise?
I noticed these on the FM site:
http://www.flyinmiata.com/index.php?dep ... r=04-46910
I noticed these on the FM site:
http://www.flyinmiata.com/index.php?dep ... r=04-46910
- 2005 MX-5 SE
http://www.dinography.com.au - From the ground
http://www.skysight.com.au - From the air
http://www.dinography.com.au - From the ground
http://www.skysight.com.au - From the air
- ASE05
- Racing Driver
- Posts: 741
- Joined: Fri Jun 10, 2005 11:35 pm
- Vehicle: NB SE
- Location: Not from 'round these parts...
- Contact:
SE injector resistance?
Those clips are on the way with the injectors.....I didn't realise they clipped into the old harness and into the new injectors.......schweet
should be no probs with idle etc with the correct map in the EXEDE.
Just gotta find the time to fit injectors and get her down for a re-tune.....
should be no probs with idle etc with the correct map in the EXEDE.
Just gotta find the time to fit injectors and get her down for a re-tune.....
Sing that song, puff all night long.......
Return to “MX5 Audio, Electronics & Lighting”
Who is online
Users browsing this forum: No registered users and 113 guests