T-bolt hose clamps like below:
Where can you get them from in Melbourne? They don't seem to be a common item?
Need a couple of 2" and 3" sizes?
Where do I get these in Melbourne?
Moderators: timk, Stu, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy, zombie, Andrew, The American, Lokiel
-
PASHN8
- Racing Driver
- Posts: 648
- Joined: Thu Jun 02, 2005 11:28 am
- Vehicle: NB SE
- Location: Melbourne
- Contact:
Where do I get these in Melbourne?
Lads,
T-bolt hose clamps like below:
Where can you get them from in Melbourne? They don't seem to be a common item?
Need a couple of 2" and 3" sizes?
T-bolt hose clamps like below:
Where can you get them from in Melbourne? They don't seem to be a common item?
Need a couple of 2" and 3" sizes?
- 2005 MX-5 SE
http://www.dinography.com.au - From the ground
http://www.skysight.com.au - From the air
http://www.dinography.com.au - From the ground
http://www.skysight.com.au - From the air
-
Woo
- Fast Driver
- Posts: 359
- Joined: Tue Oct 12, 2004 12:43 am
- Vehicle: 10AE - Turbo
- Location: OES Melbourne
- Contact:
Where do I get these in Melbourne?
Try Pirtek Dino
I got mine at Bayswater
hth
I got mine at Bayswater
hth
Very slightly modified 10AE #2562 ..... one of 149 in Australia 
Race what you brung ..... And hope you brung enough
Race what you brung ..... And hope you brung enough
-
PASHN8
- Racing Driver
- Posts: 648
- Joined: Thu Jun 02, 2005 11:28 am
- Vehicle: NB SE
- Location: Melbourne
- Contact:
Where do I get these in Melbourne?
Thanks Baz, will get down there today
- 2005 MX-5 SE
http://www.dinography.com.au - From the ground
http://www.skysight.com.au - From the air
http://www.dinography.com.au - From the ground
http://www.skysight.com.au - From the air
-
Juffa
- Racing Driver
- Posts: 1751
- Joined: Sun Apr 27, 2003 11:00 am
- Vehicle: ND - 2 GT
- Location: Bayside - Melbourne
- Contact:
Where do I get these in Melbourne?
Or there is these;
http://www.spareco.com.au/Breeze/Breeze ... Clamps.htm
These are what comes standard on the SP.
I have these on the majority of my hoses. Have not had one come loose since fitting.
Can be bought from the importer in Oakleigh, just of Dandenong Road, between Warrigal Rd and Ferntree Gully Rd.
J
http://www.spareco.com.au/Breeze/Breeze ... Clamps.htm
These are what comes standard on the SP.
I have these on the majority of my hoses. Have not had one come loose since fitting.
Can be bought from the importer in Oakleigh, just of Dandenong Road, between Warrigal Rd and Ferntree Gully Rd.
J
Former owner of Mailbu Stacey, Smurfette and Tweety.
-
wun911
- Speed Racer
- Posts: 2114
- Joined: Tue Sep 11, 2007 12:13 pm
- Vehicle: ND - 2 GT
- Location: Melbourne
Where do I get these in Melbourne?
Man that looks heavy just use zip ties is lighter...
every ounce counts
-
bruce
- Speed Racer
- Posts: 7771
- Joined: Fri Apr 25, 2003 11:00 am
- Vehicle: NA8 - Turbo
- Location: Victoria
- Contact:
-
PASHN8
- Racing Driver
- Posts: 648
- Joined: Thu Jun 02, 2005 11:28 am
- Vehicle: NB SE
- Location: Melbourne
- Contact:
Where do I get these in Melbourne?
Thanks boys, got them today
Spent a big weekend just past on the SE and fitted up a whole lot of stuff, just need to put the finishing touches and configure the electronic boost controller and she should move ok
Spent a big weekend just past on the SE and fitted up a whole lot of stuff, just need to put the finishing touches and configure the electronic boost controller and she should move ok
- 2005 MX-5 SE
http://www.dinography.com.au - From the ground
http://www.skysight.com.au - From the air
http://www.dinography.com.au - From the ground
http://www.skysight.com.au - From the air
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: Google [Bot] and 16 guests
